Press the BC button on the end of the wiper switch when the service light signal appears. The word “Reset” ought to now appear on the screen. Hold the BC down while pressing.
In This Article...
Procedure for BMW 5 Series 2021 Oil Change Light Reset
- Make sure the ignition is off and the hood is closed.
- Press the START button three times fast while removing your foot from the brake pedal.
- Watch for the cluster to show Diagnostic Mode Active.
- When the service menu appears, continue to hold down the BC or RESET button on the left side of the steering column or instrument cluster.
- The same button must be used to navigate the menu until ENGINE OIL is visible.
- Hold down the same button while you wait for the reset to finish.
- Follow the instructions on the screen; you might need to repeatedly press and release the button.
How can you turn a BMW’s inspection light back on?
Step 1 is to turn off the ignition. Step 2: Turn the key to position 1 and press and hold the trip odometer button. Step 3: Press and hold the button for about five seconds until the display reads “Oil Service” or “Inspection” with “Reset” or “Re,” and then release. Step 4: Press and hold the button for an additional five seconds.
How can the service light be turned off on a BMW?
- Start the electrical systems of the car, but do not start the engine.
- Till the service notice shows, press and hold the tiny odometer button in the instrument panel’s lower left corner.
- When the message says “Reset,” let go of the button and press and hold it once more.
How can I clear the BMW Service Due display?
Find the tiny odometer button in the instrument panel’s lower left corner. until the service message shows, press and hold. When the message says “Reset,” let go of the button and press and hold it once more.
How can the oil light on a 2001 BMW 525i be reset?
- Turn the ignition to the ACC position with the key in the OFF position, then press and hold the TRIP or S/R button (found on the left side of the instrument cluster).
- Hold the TRIP or S/R button down until the message center reads “Reset,” then release the button.
- Press and hold the TRIP or S/R button once more for 5 seconds, or until the “Reset” message starts to blink, and then release the button.
- While the message is still blinking, let go of the TRIP or S/R button and then press it once more quickly to confirm reset.
- When the new distance till service due is displayed, the reset will be validated.
How can I stop the service engine soon light from flashing?
What should I do to make the service engine soon light turn off? Most of the time, you just need to fix the issue that was the root of the service engine light, and it will go away on its own. You must use a diagnostic scanner or a specific method specific to your automobile model to reset the light if it appears as a result of scheduled maintenance.
What does “service due” mean on my BMW?
Service Vehicle: Your BMW needs service if this light is red. When it’s yellow, your BMW needs maintenance soon. It’s best to book a servicing appointment as soon as you can in either situation.