the following steps:
Press the start button after inserting a key into the ignition. Hold off until every check-light and beeping has stopped. To reset the odometer, press and hold the brake pedal until a yellow triangle appears. After that, let go of the odometer reset button and use the scroll on the left side of the steering wheel to locate the icon you wish to reset the service light for. The reset light will turn on when you press the top button (the BC button) on the left control handle. Press it once more and hold it for a little while. That ought to finish it. Until you have completed everything that needs to be done, you can scroll. Take a keyfob out once you’re finished, and you’re all set to go!
Excellent Post—it took a few tries to get the sequence just right, but the final result (3 minutes) worked flawlessly! Continue the excellent work!
Make sure to keep holding the brake and odometer through the yellow triangle so that the service reset menu will automatically open.
MANY THANKS TO DIMSUM!!!!! I recently had an AC icon crop up, and I just reset it today after seeing your video. In addition, the closest dealer is 1500 kilometers away. I believe I owe you a case of beer, but we are on the opposite end of the city. I was raised on the west shore. Anyway, I appreciate it very lot.
The “not sure what this is” is an emissions and roadworthiness test. This is more of a reminder to schedule an inspection and emissions test for your state, county, municipality, etc. than it is evidence of a problem. I appreciate the reset details…
In This Article...
One time press the start/stop button (do not start the engine)
2. To make the service indicator light appear, press and hold the Set/Reset button for 10 seconds. Scroll the service menu by repeatedly pressing the Set/Reset button.
3. If the service item is past due, the message “Reset executable” will appear. By holding down the Set/Reset button for 3 seconds, the reset will begin.
4. You’ll see the message “Execute reset?” Press the Set/Reset button one more for three seconds to confirm the reset. ‘Reset running’ will be indicated on a progress bar.
5. The message “Reset successful” is displayed to validate the reset.
6. Switch off the ignition. To make sure the indicator has been reset, start the engine.
How do you turn off the BMW 3 Series’s “Service Engine Soon” light?
Find the tiny odometer button in the instrument panel’s lower left corner. until the service message shows, press and hold. When the message says “Reset,” let go of the button and press and hold it once more.
How can you turn a BMW’s inspection light back on?
Step 1 is to turn off the ignition. Step 2: Turn the key to position 1 and press and hold the trip odometer button. Step 3: Press and hold the button for about five seconds until the display reads “Oil Service” or “Inspection” with “Reset” or “Re,” and then release. Step 4: Press and hold the button for an additional five seconds.
How can the service light be turned off on a BMW?
- Start the electrical systems of the car, but do not start the engine.
- Till the service notice shows, press and hold the tiny odometer button in the instrument panel’s lower left corner.
- When the message says “Reset,” let go of the button and press and hold it once more.
After an oil change, how do you reset the check engine light on a BMW?
My uncle, a retired technician, recently changed the oil in my BMW. The maintenance light is still on, so I suppose he forgot to turn it off. How can I turn off the BMW’s oil-change light?
In less than two minutes, find out if your auto insurance is being overcharged.
- Don’t start the engine after turning the ignition on. You should hit the start button instead of depressing the brake pedal if your car has a push-to-start system.
- The service menu will show if you continue to depress the trip reset or odometer button on the instrument cluster. The reset button is normally located to the left of the speedometer, and pressing it for around 10 seconds should bring up the service menu.
- To discover the oil change notice, use the reset button to scroll through the settings. Press the reset button after that.
- Depending on the model, you might have to scroll through the options using the controls on the turn signal lever until you come across a prompt asking you if you’d like to reset the warning. Then, to reset the turn signal, press the BC button at the lever’s end.
- When prompted, press and hold the reset or BC button until the display indicates that the device is resetting.
You can save money on automobile expenses by having friends or relatives work on your vehicle, but employing Jerry can help you save money on extra expenses like auto insurance. The typical user of Jerry saves $887 annually on auto insurance.
Don’t be afraid to alter insurance or payment plans because you’re concerned about the extra labor. Jerry takes care of all the paperwork and even assists with canceling your previous insurance! Additionally, you can text one of our agents using the app if you have any questions along the route. They’ll be there for you whenever you need them.
What does “service due” mean on my BMW?
Service Vehicle: Your BMW needs service if this light is red. When it’s yellow, your BMW needs maintenance soon. It’s best to book a servicing appointment as soon as you can in either situation.
After getting my oil changed, how can I turn off the service engine soon light?
- First, locate the port.
- Connect the Reader in Step 2.
- Wait for codes in Step 3.
- 4. Remove the Code.
- Fifth Step: Start Your Car
Following an oil change, how do you reset the code?
How to reset an oil change light for specific Jeep products, such as the Wrangler, is as follows:
- Without turning the engine on, place the key in the ignition and turn it to the “on” position.
- Within 10 seconds, depress the gas pedal three times slowly.
- The system ought to have reset by now. By turning the ignition on and off again, you can make sure. If the light is still on, try it again. Otherwise, switch off the ignition and take the key out.