Although pre-programmed for your car, your key still needs to be activated in order to be used.
Hold your new key fob flat on the dim battery indicator next to the steering column to accomplish this. After then, keep pressing the start/stop button until the “no key” warning light goes out. To check that activation was successful, press the start/stop button once more.
If this doesn’t work, you might need to activate your new key while removing your old key fob from the signal range to avoid interference. To accomplish this, first unlock your BMW with the existing key before having someone carry the key a short distance away from your car. After that, you can push the start/stop button while holding your new key against the steering column.
In This Article...
What is the turnaround time for a new BMW key fob?
A new BMW key or fob installation procedure can take up to two days. How many keys have already been programmed into the system will determine that. The dealer should be able to program you a new key in an hour or two if you had one or two keys and they were both lost.
The process will take longer if more than five (depending on the model you have) keys have previously been lost because a new computer may need to be ordered and replaced.
For some BMW models, we provide quick 24/7 automotive locksmith services like emergency lockout assistance, car key replacement, ignition repair, and more.
How much does a new BMW key fob battery cost?
I recently visited the business. The key fob wouldn’t work to lock or unlock my car when I tried. My BMW key fob’s battery has to be changed.
In less than two minutes, find out if your auto insurance is being overcharged.
Batteries for key fobs typically last three to four years. Your current BMW key fob might need to be replaced, depending on the model.
You should replace the battery in your smart key or Comfort Access BMW key fob by following these simple instructions:
- Get a CR2032 battery from a department or auto store. It will cost you around $2 to buy it.
- By depressing the tab on your key fob, you can take the valet key off.
- To pry open your battery cover, use the key or a flathead screwdriver.
- Replace the old battery with the new one after removing the old one.
- Restore the key to its housing and close your key fob.
You have a non-comfort access key fob if you are unable to open it because it has an indent in the side. You must take a long drive to recharge your key fob battery because it can only be done through the ignition of your automobile.
Once the battery has been successfully replaced or recharged, make sure to test it by locking and unlocking the doors several times. To find out how much you can save on your auto insurance before you leave again, take a moment to glance at the Jerry app.
The Jerry app, a registered broker that provides end-to-end support, compiles reasonable rates, assists you in switching plans, and even assists you in terminating your old policy.
Do you need to reconfigure your BMW key fob after changing the battery?
A remote key fob needs to be associated with your vehicle particularly in order to be secure.
This stops people who drive the same make and model of automobile as you from using their remote to access your car. You’ll need to reconfigure the fob if changing the batteries has reset this connection or if it was somehow disrupted in order to get it to detect your car once more.
How can I program my BMW key?
Take the BMW key fob you want to configure, hold down the unlock button, and then press and hold the BMW logo three times. The doors should lock and unlock once more. When this occurs, you are ready to go! You’ve set up your BMW key fob.
How can I obtain an additional BMW key?
A recent news story claimed that 30% of car owners lose their keys every week. Even while it may occasionally be a little inconvenience, vehicle owners can avoid having their day ruined by it with a little advance forethought. Obtaining a backup key is the most effective approach to make this happen.
Every year, cars get more technologically advanced, and what was once just a basic metal key keeps evolving into a smart fob with a variety of features. You have three choices for getting a new or replacement key for your BMW:
- You can cooperate with your neighborhood BMW dealer.
- You can work with a neighborhood locksmith business that has the skills necessary to duplicate and program BMW keys and fobs.
- You can obtain a “blank” replacement key and fob online, then take it to your neighborhood dealer or locksmith to have it programmed and cut once it arrives.
You will need to have your own personal identifying information, such as the BMW’s VIN and the year and model, in order to use any of these choices. In addition, you’ll need to have identification from the government and documentation showing your identity as the car’s owner. It may seem obvious, but having the necessary information on hand will speed up the process of procuring a replacement key if you find yourself in need of one after locking yourself out. The situation might become less stressful as a result of this.
The dealership may require you to tow your car there so they may make your replacement key if you opt to use them in an emergency and need the replacement key right away. They can come to you if you choose a trained local locksmith, which will save you time, money, and stress.
What should I do if my BMW key is lost?
If you still have one key, you must bring your car, one piece of personal identification, one form of address identification, and the V5C logbook to your selected BMW Center*. You will need to make arrangements for your automobile to be delivered to your preferred Center along with the necessary documentation if you have lost both keys and are unable to access the vehicle.
* A photocard driver’s license cannot be used for both address identification and personal identification.
To keep you safe, our Centers are required to adhere to these security precautions. Additionally, you’ll have to sign for your new key upon picking it up.
A BMW key fob can be programmed by a locksmith.
Dealerships charge hundreds of dollars to complete the replacement of a BMW key due to the complexity of the operation. The costs of employing a dealership start to really build up in the following ways:
- Your automobile won’t start without a key. Your automobile will need to be towed by the dealership into the service area before any repairs can be made.
- Key fobs are not stocked in excess or as new ones at BMW shops. It will take about 10 days to receive your customized key once you place a custom purchase. Your automobile is unable to be driven at this time.
- Your new key needs to be programmed to the vehicle when it arrives, and the immobilizer system as a whole needs to be reprogrammed to recognize the new key fob. Dealerships bill for their time at a premium hourly rate, just like any of their other services.
This process not only takes a lot longer, but it also costs at least twice as much. You’ll wind up paying the dealership at least $500 to replace your BMW key when everything is said and done. There must be a better approach!
There is, in fact, a much better way! You can save yourself hundreds of dollars and a lot of hassle by working with a reputable locksmith like Cheap Lock & Key! You can have an immediate replacement performed at your location for roughly $250 to $350, which includes a new key fob and the reprogramming of your immobilizer system. The keys that locksmiths use and stock up on are identical to those from the dealership.
After the locksmith has finished replacing the key, make sure to test locking, unlocking, and starting the car completely. Therefore, the next time you need a new BMW auto key, make sure to check with your local locksmiths first before going to the shop!
Can a BMW key fob be tracked?
Nope. There is nothing you could do to make the fobs detectable even if there was a means to start reverse communication because they lack a speaker.
Is it possible to change a key fob on your own?
Many automakers have started designing vehicles with locks that can be unlocked with little more than a key fob since the development of remote technology. The owner of a key fob can easily unlock a door by pressing a button, and many of them can also start their car by pressing a button as long as the fob is inside.
Unfortunately, the dealership may assert that they have property rights over the device and, as a result, only they can make a copy and program it, which comes with an outrageous charge, if a car owner loses their key fob or wishes to make an extra copy. However, while making a new key fob and programming it to function with your automobile may require expert guidance, a knowledgeable locksmith may help you with this task without forcing you to go back to the dealership for assistance.
But hold on, is it illegal to create a new key fob without the dealer’s consent?
Some dealers can even claim that if the task is not carried out by a licensed operator, making a new key fob is illegal. However, even if this might be the case with a leased or rented car, you are probably allowed to create as many copies as you want with the assistance of a professional.
Additionally, programming a key fob to work with your car is also not a difficult process. While you shouldn’t attempt to manufacture a copy yourself, a skilled locksmith can provide you with a new key fob quickly.
Can I change the battery in my BMW key myself?
Although the battery in this key is not intended to be changed, it can be done by cutting the casing apart and soldering a new battery. You’ll need a VL2020 battery to swap out this BMW key battery. The manufacturer does not advise performing this operation.
A BMW key can it be copied?
The Keyless Shop now provides mobile servicing and replica BMW keys. BMW Replacement Keys are typically eprom-required and difficult to program.
What should the price of a new key fob be?
According to Mel Yu, automotive analyst for Consumer Reports, “the cost to replace the current key fobs can run anywhere from $50 to as high as $400 depending on the manufacturer.” And that only applies to the fob. To have new mechanical backup keys created and replacement fobs configured to function with your automobile, add an additional $50 to $100.
Are key fobs replaced by AutoZone?
AutoZone does offer key duplication services for cars made by Toyota, Ford, Honda, Dodge, GMC, Mercedes, Kia, and other manufacturers. These services include key duplication, transponder keys, key fobs, and vehicle key blanks.