You hammer the screwdriver and socket onto the shop floor by inserting it into the square socket hole with a screwdriver. like opening a gun with a mortar.
In This Article...
Remove a wheel lock without a key using method two of two.
To remove the wheel lock in this technique, everyone uses a universal wheel lock removal tool. The wheel lock will probably be damaged, and you won’t be able to use it again. Before utilizing the universal kit, make sure the wheel lock key is not someplace in your possession.
Step 2: Select the proper tool for removing the wheel lock. Test the tool by placing it on top of the wheel lock that has to be removed.
The removal socket’s interior teeth must bite into the wheel lock for it to fit tightly.
Step 3: Use a mallet to strike the tool. Use the rubber mallet to firmly tap the end of the wheel lock removal tool.
The wheel lock removal tool must be firmly attached to the wheel lock in order to work.
The wheel lock removal tool’s internal teeth are currently tearing into the actual wheel lock.
Step 4: Unlock the wheel. With your lug nut wrench, counterclockwise crank the removal tool to release the wheel lock.
Step 5: Complete the manual turning. You should be able to turn off the wheel lock the remaining distance by hand once the lock has been loosened.
Step 6: Take the tool’s lock off. With your mallet, whack the punch against the wheel lock after inserting a punch or screwdriver through the tool’s hole.
- To get the lug nut out of the removal tool, it may occasionally be necessary to hold it in a vise and turn the removal tool clockwise.
For the remaining wheel locks, repeat steps 7 and 8. Apply the same method to any additional wheel locks that are required.
Make sure you store the wheel lock key in a location where you can easily locate it if you are installing a new set of wheel locks. The wheel lock key is best kept in the glove box, center console, or with your tire jack. The procedure will be made as simple as feasible in this way. Have one of YourMechanica’s mobile specialists assist you if you believe you need new wheel bearings or assistance tightening the lug nuts.
How is a BMW wheel unlocked?
- The same way you did when the wheel was first locked, pull the wheel downward.
- Not sure which way to move?
- Put your key in the ignition and turn the key to the right while keeping your steering wheel pointed in the right direction.
How are wheel locks removed?
Key for wheel lock
A word of caution: Never use power tools to unlock your car’s wheels. The wheel lock and wheel lock key may be damaged or stripped by the power tools’ excessive force, rendering them ineffective.
Step 1: Verify that your car is in park. Use the parking brake to increase safety.
Align the key with the nut in step two. Set the wheel lock key’s splines in alignment with the wheel lock on the wheel.
To do this, insert the wheel lock key into the lock and carefully turn it until the tabs or pattern match up. The wheel lock key will automatically latch into place.
Step 3: Squeeze the wheel lock key with your lug nut wrench. It has a six-point hexagonal head and ought to be the same size as your car’s wheel nuts.
Step 4: Counterclockwise turn the lug nut wrench. This will loosen the wheel lock, albeit it might take some force to remove it from the wheel.
Step 5: Manually deactivate the wheel lock. You ought to have no trouble disabling the wheel lock manually after loosening it.
On a BMW, where is the locking wheel nut code?
Your locking wheel nut key is probably where the manufacturer stored it if your car is new and you haven’t needed to remove the wheels yet. Typical locations are:
- a glove box
- It might be in a separate compartment under or with your spare wheel.
- Check under the carpet, in all the compartments, and in the boot as well as the first aid kit.
- Check the seat pockets and underneath the seats under the driver’s or passenger’s seat.
- pocket for door cards
- middle console for storage
Some locking wheel nut keys are provided separately in a little plastic bag, while others are kept in a compact plastic box along with extra wheel nuts.
Try to recall the last time one of the wheels needed to be removed if you can’t find your locking wheel nut key. The mechanic had to remove the wheels if you had your car serviced or had parts like the brakes updated. Before you depart, it is usually wise to confirm the location of the item the garage has left for you. This could prevent you from having to spend time the following time hunting for it.
The locking wheel nut key is where?
If you can honestly say that you haven’t used your locking wheel nut key in the period you’ve owned your car, the odds are that’s where the car’s maker kept it. This indicates that it might be anywhere:
- The locking wheel nut key is frequently kept in the glove box of vehicles, so it makes sense to look there first.
- With regard to your spare wheel, you probably already know that, if your automobile has one, it is housed under the bottom panel of the boot. Make sure to look here because many automakers will keep the wheel nut key in a box near to the spare wheel.
- Storage in the boot: A few manufacturers place the wheel nut key in a panel on either side of the boot. This may be where it is if your automobile has these storage panels.
- If you’ve already looked elsewhere, check in or under the seats because the set might have slid under there during transit. This applies to both the driver’s and passenger’s seat pockets.
Are the locking wheel nuts on BMWs uniform?
Each automobile has a different locking wheel nut key, right? Yes is the short response. At the very least, they are exclusive to the locking wheel nut set that your manufacturer gave you as your car was rolling off the assembly line.
Do locking wheel nuts come off with the AA?
Locking nuts come with a code that allows owners to request a new key from the manufacturer. In the absence of the code, garages have equipment that can remove most nuts. The AA and RAC are two breakdown organizations that frequently offer assistance.
There are tools for removing locking wheel nuts that you can buy from places like Amazon. You use the tool to hammer over the nut to create a reverse thread, and then you use a wrench to unscrew it. They are one-time use items because they self-destruct during use.
An old 12-point socket that is just a bit too small can be used to hammer until it bites onto the nut, then it can be removed with a ratchet if the nut is a simple variety without a rotating outer shroud or collar. If you attempt this with a high-end locking nut from a manufacturer like McGard, the wheel will be ruined.
Do I need a key for the locking wheel nut?
In order to prevent wheel theft, locking wheel nuts have grown in popularity among UK drivers over time. It was a problem because conventional wheel nuts could be removed so readily before locking wheel nuts were invented. If your car is more than ten years old, it can still come with a normal locking wheel nut. We advise replacing at least one of them per wheel with locking wheel nuts to deter theft and improve your safety. To remove the wheel, a locking wheel nut key is required. The presence of locking wheel nuts on a wheel will serve as a deterrent to thieves.
What does a wheel lock key cost?
Having trouble locating your wheel lock key? You might have to ask the manufacturer or dealer to make you a new one. You will need the code associated with your specific key to complete this. Typically, a set will cost you anything from $20 to $120.
The owner’s manual typically contains the key code for wheel locking that came with the car. Alternatively, you might be able to take your automobile to the dealer and have the locks removed using a master key set.
The key code should be located in the box or bag your set arrived in if you bought your wheel locks separately. Your wheel lock’s brand, make, or model will probably be able to be found online, where you can also obtain a replacement key. Otherwise, you might need to have a reliable repair remove your wheel lock. Just make sure to give them a call in advance to see if they can assist you!
Our ASE-certified specialists at NuBrakes provide high-quality, reasonably priced brake repair services at your home or place of business.
What occurs if I misplace the key to the locking wheel nut?
The first thing you should do if you have a locking wheel nut but no key is to order a new one. If you know the code—check your car’s manual or document file—you may quickly obtain a replacement key from your neighborhood dealer.
There are companies that will match your key pattern from a phone image you send in displaying the geometry of your wheel nut, so all is not lost if you can’t find the key. (Keep in mind that just a few patterns are available from each wheel nut manufacturer.) In this situation, you will frequently be required to provide proof that you are the owner of the vehicle you are attempting to remove a wheel from, which may entail submitting a picture of your V5C log book.