For your information, avoid storing batteries on concrete floors. Instead, place them on a shelf or at least an inch from the ground.
I can swap out two 28-volt batteries in a 757-200 far more quickly than I can in my automobile.
Open the access hatch, unplug the batteries from the temperature sensor cannon plugs, cut the copper safety wire from the knob, crank the plugs until they are halfway off, and then unscrew the two bottom retainer knobs so that they will slide out.
Did a nearby BMW dealer sell you this battery? I was wondering if I could find an Exide battery at AutoZone or PepBoys after noticing the “EXIDE” logo on the top of the battery (new battery).
Using an Interstate battery, I changed my battery on my own. I’ve heard tales that you need to reset or register, or else the stealership will rape you, but that is nonsense. Any battery that meets the same specifications as the manufacturer’s battery may be used. Many other people have done this effectively on their own as well! I’ve had no problems for more than six months.
I know this sounds like a “noob” inquiry, but is registering the battery really necessary? According to what I’ve read on the forum, problems could occur if you don’t register the battery? What if I choose to use an other brand than BMW? Will I still need to register it?
Perhaps a new DIY on “how to buy a battery” is necessary if a replacement battery costs $300.
I looked at the regular Autozone/Advance Auto Parts stores in search of one for my E60…
The CCA of the battery was the same, but it differed in terms of size, weight, and capacity. Venting also differed somewhat. I finally purchased a dealer battery for $250; is that a good deal?
A battery for a 2011 335i cost me $145 instead of the $200 MSRP. It carries the EXIDE logo. I wouldn’t even consider taking a risk at Sears, AutoZone, etc. at that price.
What a dealer will charge to register the battery after installation is the next open question. The hosing takes place there.
The local Interstate battery looked up the item and offered a similar capacity AGM battery, which is what I needed. These batteries are military grade unbreakable batteries with a 7 year warranty and are far lighter than the lead acid battery they replaced. It was almost the same price as a lead acid exide at the dealership.
A Bavarian Technic tool has been delivered, and I’ve registered the new battery.
Anyone know the purpose of the thread on the negative battery cable? Mine appears to have come loose. It appears to be non-conductive. While I was reattaching the negative cable, it sort of slipped off. Greetings, Mickey!
In This Article...
How is a BMW battery removed?
Lift up on the panel covering your battery after opening the trunk. Remove the negative battery terminal’s bolt with a 10mm socket, remove the terminal from the battery post, and place a barrier between the post and the terminal. Reverse directions to rejoin
What size battery is required for a BMW E90?
The 90/720 AH/CCA battery is what most US Market E90 use. Your vehicle utilizes the 90/720 battery if you have a CIC or a business radio with Bluetooth. On the negative cable, it will also have the battery monitor terminal. The 90/720 BMW battery’s current part number is “810.”
Can I remove the battery from my BMW?
Steps for Removing a Car Battery Under the upholstery that covers your trunk, the battery is often found on the right side of your car. Using your 10 mm socket wrench, detach the negative battery connector from the battery.
How can I reset my BMW now that the battery has been changed?
Here are the instructions so that you can see how crucial the BMW computer reset is after reading the preceding explanation.
- Once the lights and radio are turned on, first switch the ignition key of the BMW automobile to the accessory position. This must be completed prior to starting the car. Then, hold down the “Trip” button on the instrument panel for a few seconds until the red light appears.
- Once more, press and hold the “Trip” button until Reset appears.
- Press the same button a third time after that. The BMW computer will quickly reset now.
BMW automobile battery replacement and computer reset are both inexpensive procedures. The sooner you complete this, the easier it will be for you to operate your BMW vehicle. Despite all of these facts, this surgery should not be taken lightly. There are auto repair shops with qualified experts who adhere to the manufacturer’s warranty guidelines. To receive a safe and secure service, consult these businesses.
Can I change the battery in my BMW myself?
Do you not adore your BMW? And you intend to continue using it for as long as possible, right? Change your oil, replace your air filters, and do other routine maintenance on your BMW as needed to ensure its longevity. Maintaining the battery in your BMW, however, is the one item that contributes the most to flawless operation of your vehicle.
However, a lot of individuals ponder whether BMW battery replacement and registration are straightforward do-it-yourself tasks or require the services of a qualified specialist. We affirm that you can manage the replacement on your own. However, if you lack computer literacy, let us handle the registration process on your behalf.
Here, we’ll go over how to install a battery in a car, examine BMW battery registration in further detail, and provide additional information on the BMW battery reset process.
What happens if I remove the battery from my BMW?
As long as the battery isn’t overcharged, BMW uses a sealed AGM battery that doesn’t release hydrogen gas. That makes it possible for it to be positioned inside the vehicle as opposed to under the hood. There is absolutely no problem keeping it unconnected indefinitely, as others have stated.
What battery is identical to the E90?
With physical measurements of 12.0 x 30.2 mm (0.472 x 1.189 inches) (D x H), the N-cell/E90 battery has a nominal voltage of 1.5 volts, a cutoff voltage of 0.9 volts, and a capacity of 300–1000 mAh.
However, the precise battery chemistry affects both nominal voltage and capacity.
N-cell/E90 batteries are most frequently referred to by the names MN9100, LR1, R1, 910A, 910D, HR1, KR1, UM-5, UM5, etc.
Unless otherwise noted, all of these batteries are cylindrical 12.0 x 30.2 mm cells with a nominal voltage of 1.5 volts.
Can any battery be installed in a BMW?
Finding a great BMW battery is one of the most crucial factors to take into account if you want the best for your luxury vehicle. For the best performance on the road, you must purchase a BMW car battery that satisfies the strict criteria of the vehicle.
The 5, 6, and 7 Series BMW vehicles typically have very high features. These automobiles need a lot more energy than your typical car does, thus we strongly advise obtaining them strong batteries.
You must be aware of your vehicle’s needs before purchasing a BMW battery. An Absorbent Glass Matt (AGM) battery is strongly advised for modern BMW vehicles with start-stop technology since it can handle the increased energy demand. However, you can also utilize an Enhanced Flooded Battery (EFB) if you want to buy something for less money.
Just keep in mind that you should only replace the original AGM battery in your BMW vehicle with another AGM. Because these vehicles weren’t intended to be utilized with EFBs, downgrading will cause battery and engine problems with your BMW. On the other hand, if your BMW came with an EFB at the factory, switching to an AGM battery won’t cause any issues.
EFBs outlive ordinary batteries in terms of longevity. They were created specifically for entry-level start-stop vehicles, so they can easily handle the rigorous needs of the majority of modern automobiles.
However, you should always choose an AGM battery if you want to spend more money on a more potent BMW battery. Although these batteries are made for start-stop vehicles, they are also compatible with other energy-consuming vehicles.
In comparison to conventional batteries, they offer a three times longer cycle life and may be utilized in all kinds of weather. Additionally, an AGM battery is necessary if you frequently use the car’s accessories.
BMWs with typical power requirements can be powered by standard automobile batteries. Therefore, if your car doesn’t have high-end gadgets or a start-stop system, you don’t require a special BMW car battery.
What occurs if a BMW battery is not programmed?
The car will overcharge or undercharge you if you don’t register it with it. When you install a new battery, the automobile will overcharge it since older batteries receive more charge than fresh ones, which causes your battery to die sooner.
Does removing the battery reset the BMW ECU?
To reset an ECU, you don’t need to unplug your car’s battery from both terminals.
To reset an ECU, you can choose to unplug the battery from both terminals, but it’s not necessary. Simply cutting off the electricity from the car battery to the ECU will reset the ECU in your vehicle. Disconnecting the negative cable from the negative terminal is the most effective approach to interfere with the ECU’s power supply.
How can I restart my automobile once the battery has been changed?
My car’s battery needs to be changed, but I’m not sure how to restart it after doing so. How can I restart my automobile once the battery has been changed?
In less than two minutes, find out if your auto insurance is being overcharged.
- To allow the engine control systems to detect any potential issues, drive the automobile for at least 10 kilometers.
- The check engine light will illuminate if there are any problems, and the electronic control module is probably to blame.
- If it doesn’t turn on, everything is fine.
Check out Jerry app if you want to look at a good strategy to enhance your auto insurance policy now that the battery has been changed. We all can quickly provide you with individual quotations from leading insurers, leaving you with the decision of which plan best suits your needs. Once you choose one, we will all even assist you with switching!
Is it less expensive to change a car battery yourself?
Cheaper: Labor costs are the biggest benefit of replacing the battery yourself. When compared to what a garage or service center would charge to just swap out a part, doing the work yourself can be significantly less expensive.
More options: Purchasing your own auto battery allows you to chose from a wider range of brands and merchants as opposed to the one your mechanic recommends.
Total management: You don’t have to rely on someone else to properly replace a car battery. You can control every aspect of the battery replacement if you feel confident in your own abilities and don’t want to delegate the task to someone else.
Flexible hours: If you pay a mechanic to change your car battery, you are restricted to their business hours, which frequently do not cover nights or weekends. You can still run to the 24-hour Walmart and change your own car battery in the morning before going to work if it dies at 9 o’clock at night.
Should I reprogramme my car after changing the battery?
No, usually you don’t need to reprogramme your car following a battery change. But if your vehicle has an onboard computer, you might need to reset it.
In addition, This implies that you are not need to purchase a BMW battery if your car’s battery has to be replaced and any replacement battery that fits your car will work. The car’s computer will automatically alter the charging procedure if you purchase a BMW battery, though, to ensure the battery lasts as long as possible.