1. Start by removing the battery. Under the black cover in the trunk’s passenger side is where you’ll find the battery. Loosen the nuts on the negative and positive terminals using the 10mm nut driver (to be safe). Move the cables away from the battery terminal and disconnect them to prevent contact.
2. Take a peek under the steering wheel’s spokes. On either side, there is a small slit in an indentation. You should insert your flat-head screwdriver here.
The air bag retaining springs can be compressed with a tiny flathead screwdriver. When you come into contact with the spring, gently feel around with the screwdriver tip. The spring retracts when you press in. The screwdriver should be inserted slightly higher than the 3:00 and 9:00 spokes to get the best results when determining the ideal angle to compress the spring (see the pictures). To prevent damaging the airbag holes, please take your time. Examine images. During this procedure, it is simple to become frustrated. Make an effort to document the procedure well.
3. Make careful to make strong contact with the spring while pulling forcefully on one side of the airbag’s edges. Repeat on the opposite side. You may need to flip sides often since one side will occasionally clamp back down.
4. By pulling up on the yellow and green connectors, detach the airbag.
5. Disconnect the two wires that are attached to the clock spring within the wheel. When removing one, a locking tab needs to be depressed and the smaller wire carefully taken out.
6. To remove the middle bolt, use the 16mm ratchet and extension. If the wheel has never been taken off previously, it could be quite difficult. It might be best to get a friend’s assistance to hold the wheel firmly while you use leverage to remove the bolt (so as to not harm steering column).
7. When you install the replacement wheel, remember to line up the two markers at the 6:00 position (steering column and wheel).
8. When removing existing trim, make a note of the locations of the screws. Replace the old wheel’s wires, spring plate, and trim.
9. Reattach the wires to the airbag and clock spring. Make sure the cables are connected properly by taking note. Additionally, check that wires are not in the path of the two sizable springs that clamp the airbag. Push the airbag back into position.
10. Reattach the battery.
Note: The information above is available as an Adobe PDF file that you may view, download, or print: PDF for BMW steering wheel removal
In This Article...
FlzRider
Pushing inward on the two push pins that are in two semi-deep holes on the bottom side of the plastic steering column cover will allow you to remove it. The steering wheel tilt/telescope must then be unlocked by pulling down on the lever. The entire plastic cover can now be pulled downward, and it should begin to detach from the top portion of the steering column. Because I always remove it when I take that particular piece off, I’m not sure if it can be taken off with the black plastic panel that is above the pedals and other items. But even then, it’ll probably need to move around a bit. A tiny plastic phillips screw located on the top side next to the steering wheel is the only thing holding the top part of the steering column cover in place.
On a BMW 3 Series, how do you release the steering wheel?
Start the engine by placing your key in the ignition and turning the steering wheel in the proper direction. Turn the wheel in the opposite way and repeat the process described above if the wheel won’t unlock and/or the engine won’t start. You should now be able to release your steering wheel
Without a key, how do you unlock a BMW steering wheel?
How can I unlock the push-to-start button on my steering wheel? You must have noticed that when you turn off your car and remove your key, the steering will lock. Therefore, there are two ways to unlock your steering wheel while using a push start button.
- You might try lightly shaking the steering wheel back and forth while applying the brake and pushing the start button once.
- You can remove your foot from the stop pedal, push the start button twice, and move the steering wheel simultaneously. The ignition will start with either choice.
How is a steering wheel removed, and with what tool?
To secure the steering wheel to the steering column, the steering wheel boss is built with a tapered spline. Once mounted, the steering wheel becomes caught on the column. By design, this assures that even if the retainer nut comes undone, the steering wheel will stay securely in place. The steering wheel removal tool, also referred to as a steering wheel puller, is made to gently and securely slide the steering away from the column’s taper.
Never try to take the steering wheel off without the right tools. If you don’t, you risk damaging the steering column, the steering box, or getting hurt.
Why does the steering wheel on a BMW lock up?
I drove my automobile to the mechanic because it locked up while I was driving to work. What causes a steering wheel to lock when driving?
In less than two minutes, find out if your auto insurance is being overcharged.
A compelling query and a perilous circumstance. Even though steering wheel lock-up on newer cars is uncommon, it can happen. Sharp turns or issues with the power steering system, the steering rack, column, or suspension are the most frequent causes of steering wheel locking while driving.
Here is a detailed explanation:
- Your power steering pump may become clogged with debris or stuck, or your car may leak power steering fluid, both of which can cause the wheel to lock up. Any one of these problems can make steering quite challenging.
- Issue with the steering rack, column, or suspension: Your steering wheel locking up is a very rare symptom of a suspension, steering rack, or column, or steering column, failure.
- Automobile ignition lockup: If the ignition system of your car experiences a fatigue failure, your car key won’t be able to switch the ignition on or off. This may result in the steering wheel locking if your car is already moving.
- Yes, if you want to pretend that you’re driving in the Formula One, all those rapid spins can wear down your car’s steering mechanism and cause your wheel to lock up.
Although steering wheel locking is a rare occurrence, it could pose a serious risk to you, your passengers, and other motorists. Take your automobile to a reliable mechanic to have the problem identified and corrected if you detect any problems with the steering wheel.
Another technique to make sure you’re safe when driving? Utilize a strong auto insurance policy to protect your vehicle, and use the Jerry app to compare rates for the best coverage. Jerry helps you enroll in your new policy and cancel your old one after you’ve made your decision.
A heated steering wheel can be added to a BMW, right?
The switch, a steering wheel with a heating element within, and coding are required. The one with the heating element has a different part number. I believe that all that is required is to just add the switch.
Can the steering wheel be changed?
It is easy to replace the steering wheel, and many people do so to suit their preferences. However, you’ll forfeit your warranty, airbag, and steering-mounted controls, so choose wisely. Airbag-containing steering wheels present a significant replacement challenge because they demand flashing and verification, which should only be attempted by qualified professionals. The cost of replacing the steering wheel varies depending on the type of replacement required, such as if the complete steering system or just the wheel has to be changed. For accurate information, I urge you to contact your local Hyundai service shop or a qualified mechanic.
You were so kind to say that! Your response to the query will help hundreds of people decide whether to buy! After moderation, it will show up on the website.
Is it difficult to swap out a steering wheel?
You should be able to clearly see the central lug nut holding the steering wheel in place after unplugging the wires. Most of the time, you can remove it using everyday equipment.
But occasionally, because the center lug nut pattern could differ, you’ll require a specific set. But getting rid of it shouldn’t be that difficult.
How much does a new steering wheel cost?
The price of a new steering wheel can range from $70 to $75. Depending on variables like the brand and model of your car, labor charges can change. If you are knowledgeable enough about DIY auto repair, you can replace the steering wheel on your own to save some money.
Can a car be towed while the steering wheel is locked?
Question:
Will the vehicle simply follow behind when using a tow bar, or do you have to tie up the steering?
Expert Reaction:
On the car being flat-towed, the steering would not be locked out. The wheels would scrub (drag sideways) as they turned if you did this. The steering must be freed before the wheels can be turned and, if necessary, straightened again. Similar to pulling a shopping cart with caster wheels, the wheels will turn if the cart is pushed in one direction and return to being straight when pushed in the opposite direction.
On the right side of this page, I’ve provided 2 useful links that cover every facet of flat towing. To determine whether a car may be flat towed and for instructions on how to do so, you need first study the owner’s manual.
You will also require base plates, safety cables, illumination, and additional braking in addition to a tow bar.
When parked, why do steering wheels lock?
The most common cause of a steering wheel lockup while driving is possibly a lack of power steering fluid or unclean power steering fluid. You can easily move the wheels with the power steering system, especially at lower speeds like parking lot maneuvers.
A wheel puller is what?
designed to make it simple to remove stalled hub-piloted truck wheels. With the aid of this tool, a tire service technician may easily remove and disassemble hub-centered wheels from a driving axle, steering axle, or trailer axle. removes the requirement to duck under a vehicle
What function does a steering column coupler serve?
The Steering Coupler, which has a cylinder-shaped rubber bushing, makes sure that movement from the steering wheel is transferred to the steering rack. The cylindrical bushing’s axis is almost perpendicular to the steering system’s axis of rotation. One of the input and output shafts of the steering system is connected to the inner sleeve of the steering coupler, while the other shaft is connected to the outer sleeve. Between the inner and outer sleeves, there is an elastic body.
The steering coupler will stop transmitting the action of the steering wheels to the steering rack when the central rubber body gradually loses its flexibility. Your steering wheel will play as a result of this. To prevent further harm to your steering system, you should replace a bad steering coupler. For every make and model of vehicle, Buy Auto Parts keeps a large selection of steering couplers in stock.
We offer excellent aftermarket components as well as original OEM replacements. All of our auto components are rigorously examined and backed by a warranty. Choose the correct year, make, and model of your car from our online catalog to view the components that fit it. Steering couplers of the highest caliber may be purchased at Buy Auto Parts at amazing prices and with free shipping. Contact us by email at [email protected] or over the phone at 1-888-907-7225 if you have any inquiries about our auto parts.