Anyone else experiencing issues with the MYBMW app’s status update? The date and time are updated when the screen is pulled down, but nothing else does. I can still lock and unlock the car, therefore the app is still connected to the vehicle.
There is no updating of the location, mileage, or fuel level. I’ve done all I can think of right now, the petrol tank is full, and I haven’t disconnected and reconnected the car app.
It’s difficult. Since I just tried to drag the screen down to refresh it and it still displays the time from 3am, I’m not even convinced it was a complete success.
Enter the vehicle, select an installed app, and then press the options button on the lower console, which is located behind the iDrive wheel. A screen with a few options will appear. That choice ought to be chosen already. Update services and apps.
To choose it, click the iDrive wheel. It takes a few seconds for the update. the radio volume hardware button located below the infotainment screen, and then press and hold it. I held mine in for around two minutes, during which time the car stereo twice reset. Click it again to turn it on.
Shut down the app. Click the small guy in the bottom right corner of the app, followed by the gear in the upper right. After selecting BMW ID, log out. Next, sign back in.
It takes a lot of effort. But I’ve been unable to lower the screen and force a refresh. It still informs me that it was last refreshed at around 3am.
Over the weekend, the app was causing me problems as well. Sincerely, I believe it has to do with BMW systems. Even the remote camera has recently been crap, but mine is back to normal.
I haven’t yet had a remote camera operate for me. Since picking up my car, I’ve tried it every day. I haven’t been able to make it work even once.
I’ve already given up on the remote camera for the time being because I haven’t driven the M4 in two weeks and can’t get the app to update in the garage.
In This Article...
Update and repair apps and services
1. On your infotainment system, start by scrolling down to the Apps section.
2. Select the choices button after opening the Installed Apps section.
3. On the screen, there will be alternatives. Update Apps and Services would be one of the choices.
4. Choose the Apps and Services Update option. It may take up to 10 seconds to finish the process.
5. To switch off the infotainment system after the update is finished, press and hold the power button for 45 seconds.
6. Two restarts will be performed before the system fully turns on.
7. Lastly, log out and then back in to your BMW Connected app.
8. There are times when the simplest solution is the one that is required. By carrying out the tasks in Option 1, you can update the app and ensure that all of its features are operational.
Additionally, updating the My BMW app helps it maintain privacy and security in relation to your personal data and the locations you choose to share or not share.
Generally speaking, an update protects your data from being exposed to hackers and other shady online criminals. In order to prevent potential security risks, it is preferable to update the application as soon as it becomes available.
Another important factor in why an update is necessary is the app’s speed and performance. When using the out-of-date My BMW app, the moment you enter a destination and see that the app is taking a while to respond, you should know that the software has to be updated right away. Customers can utilize the app successfully and efficiently by maintaining it.
Customers of the My BMW app can access a variety of functions. You can monitor your car’s condition, charging status, tire pressure, fuel level, and a whole lot more.
All of these fantastic features are improved by keeping the application updated. So, you should check the app’s update status if you are experiencing problems with the app not updating your location.
AgentDasher
The vehicle finder on the My BMW app has not functioned since the most recent iDrive 7 update, which was released on 03/2021.50. We were unable to get your vehicle’s location information at this time. Please try again later.
The locator is functional on both the Connected Drive website and the outdated Connected app (which will shortly be withdrawn). Both my Android and my wife’s iPhone experience the error.
1. Exit the My BMW App.
2. Perform a data clear in the app’s settings.
3. Reset your default browser to Samsung if it was formerly Chrome.
4. Log back onto the My BMW App.
5. You can switch back to Chrome at this point because it should be working.
Utilize the My BMW App to download software updates.
Through the My BMW App, you can also do a remote software upgrade. The My BMW App is an application that connects your Apple or Android smartphone with your vehicle and is a part of the BMW Connected Drive package. You may preset locations before getting into your car, adjust the heat, unlock your doors, and even download a Remote Software update via Wi-Fi.
The My BMW App software upgrading instructions are as follows:
- The Remote Software Upgrade menu can be found by opening the app.
- Select the “Wi-Fi only” download option under Remote Software Upgrade options.
- Click “Start download” to begin.
- After the download is finished, pair your phone with your car via Bluetooth and Wi-Fi.
- Verify your connections under the ‘Mobile devices’ option of your iDrive settings.
- Select “new device” to set up a Wi-Fi connection.
- Choose “Internet, applications.”
- Use your phone to scan the QR code.
- A Wi-Fi token will be sent to you, which you must accept in order to create the connection.
- While you’re traveling, the software update will be uploaded once the Wi-Fi connection is established.
How Can I Fix The Problem With My BMW App?
Most of the time, it’s just a brief loading problem. All you have to do is access the recent applications option on your phone (typically the first left button). After that, you quit the problematic app. Now launch the app again. It might operate normally. Perform a hard reset on your Android phone. Press and hold the “Home” and “Power” buttons simultaneously for up to 10 seconds.
Disclaimer: The material above is being provided solely for informational purposes. Although all information on the Site is provided in good faith, we make no representations or warranties, either stated or implied, as to its correctness, sufficiency, legality, reliability, availability, or completeness.
How do I update the BMW app?
In the car, perform the following steps to update apps and services: – In the idrive menu, go to the “installed apps” menu item, press the idrive option button (takes 10 seconds or so). – Go to installed services in the linked drive services and update those (with the option key as well)
How did the BMW Connected app fare?
Customers in the United States will be able to download the My BMW App on April 12, 2021, for use on iOS and Android-compatible mobile devices; the My BMW App will completely replace the BMW Connected app by the end of June 2021. Since 1975, BMW of North America, LLC has operated in the United States.
How is BMW ConnectedDrive updated?
Updating BMW ConnectedDrive: Instructions On the BMW website, go to the Accessories Update page. Utilize your BMW adapter cable to connect your computer to your car. The most recent BMW ConnectedDrive update can be downloaded. Open the app after completing the steps to complete the update.
What distinguishes the BMW Connected app from the My BMW app?
Every each generation of BMW apps has injected more technology into the driving experience, further fusing your personal life with that of your car. This generation was no exception. Except that the most recent premiere was meant to be a wink to the drivers of electric cars.
My BMW remote app enhanced their overview and broadened their operational range while the BMW Connected app started to enable remote access to car statistics, executing upgrades to the on-board software, or controlling specific vehicle operations. It provides direct access to service facilities, significantly improves plug-in hybrid and all-electric model functions (displays electric range, charging status, tracking of charging history, programming of charging in a time slot, etc.), and provides more practical use of maps and navigation (e.g. convenient vehicle location, sending routes from the app to BMW Maps).
Why can’t my BMW app find my car?
After seeing that the vehicle finder in the My BMW app was not functioning even though it had on my prior vehicles and the 3D remote view, I contacted customer service for advice. They suggested the following steps, which I thought I would share in case anybody else was having a similar issue.
We have a provisioning issue on the back end for both cars, so please make sure the vehicle is out in the open and
We advise resetting the head unit inside the car. Please complete the following steps in order to do so:
* Press and hold the power button for precisely 70 seconds. The iDrive power button is located on the volume knob.
* Around 25 seconds into the 70 seconds, the iDrive screen in the middle of the car will shut down and reset, but keep holding the power button for the full 70 seconds.
* In the center console, next to the iDrive controller, click “Apps” on the iDrive, and then push the Option button.
* Select Update services and apps. After that, the car will receive a brief update.
* Reinstall the BMW Connected app after uninstalling it from your phone.
After the update is finished, we advise turning the car off and giving it some time to cool before turning it back on to confirm the connection.
Please make sure you are signed into both of the vehicle’s Driver Profiles. Send a screen image of the error message you received if the problem continues.