2013 BMW 528i Coolant Flush * Filling the system with the proper coolant * Adding a cleaner compound to remove corrosion, sludge, particles, and rust
There are three basic services that make up a coolant flush or cooling system service.
In This Article...
My 2008 BMW 528i needs coolant; how do I add it?
- Locate and clean the coolant reservoir by going to the reservoir.
- Check Level: Check the level of the coolant.
- Add Coolant: Select the right kind of fluid and add it appropriately.
- Replace the cap on the coolant reservoir and tighten it.
How much coolant does a BMW 528i require?
A BMW 528i coolant change typically costs between $333 and $377. Between $166 and $209 is projected to be the cost of labor, while $168 is the cost of parts.
Can I replace my own coolant?
Step back as the pressure releases, then slightly loosen the reservoir cover. The cap should then be fully removed. Add the proper coolant to the reservoir if the coolant level is low (not the radiator itself). Use diluted coolant alone or combine concentrated coolant and distilled water 50/50.
Which coolant is OK for a BMW?
No matter what type of car you drive, whether it’s a BMW, Porsche, Mercedes Benz, Audi, Mini, or Volkswagen, your car circulates a solution of water and coolant to dissipate the heat generated within the engine and prevent it from completely melting down (one notable exception are older Porsche models that are air and oil cooled and did not use water or coolant, but instead circulated a large amount of oil to dissipate the heat).
A Spectrum of Colors
Which coolant type is best for your BMW, Porsche, Mercedes Benz, Audi, or Volkswagen out of the many available options? The answer is the kind that was initially installed in your car. Your coolant may be green, pink, blue, yellow, or even clear depending on the manufacturer. All coolants are naturally transparent, and dye is used to give them color. It has no impact on the coolant’s chemical properties that each producer adds their own colour blend. Because the water in Europe is substantially harder than the water in the United States, European manufacturers prefer coolant that is phosphate-free.
Inorganic Acid Technology (IAT), Organic Acid Technology (OAT), and Hybrid Organic Acid Technology (HOAT) are the three most common coolant types available today. A HOAT coolant is used by your BMW, Porsche, Mercedes Benz, Audi, or Volkswagen.
In order to protect aluminum surfaces, silicate is added to OAT coolants to create HOAT coolants. The cylinder heads and radiators, as well as other parts of your BMW, Mercedes Benz, Porsche, Audi, and Volkswagen engine and cooling systems, are constructed of aluminum.
Silicate and phosphate corrosion inhibitors are not used in OAT coolants. These coolants are made to last for 150,000 miles and have a long service life (or 5 years). It should be mentioned, nevertheless, that German Auto Center and the majority of manufacturers advise cleansing or replacing the coolant every two years.
The metal (Iron) components of the engine and cooling system are protected by traditional coolants, which are IAT coolants and use silicate and phosphate corrosion inhibitors. IAT coolants shouldn’t be utilized because the majority of the iron components in your BMW, Mercedes Benz, Porsche, Mini, Audi, and Volkswagen have been replaced with aluminum and other lighter composites.
It’s crucial to keep in mind that modern German performance cars, whether you drive a Porsche, Mercedes Benz, Mini BMW, Volkswagen, or Audi, will last you for many miles and years if you maintain them properly. German Auto Center in Austin is the place to go for German auto repairs. We will be pleased to help you!
Do BMWs require specialized coolant?
In addition to controlling engine temperatures, the quality of your BMW coolant is essential for lubricating the water pump, guarding against corrosion and buildup, providing anti-freeze during the winter, and, in some models, assisting in cooling for engine and gearbox oil coolers. Not just any antifreeze will do; BMWs have special coolant needs (nitrite and phosphate free) to prevent build-up and corrosion of metal components. Along with BMW coolant, we also sell coolant additives like Red Line Water Wetter, which lower combustion chamber temperatures and elevate boiling points in order to prevent detonation and banging.
Is water need to be added to BMW coolant?
To make the best coolant, they must be mixed. You can purchase antifreeze that is full strength and needs to be diluted with distilled water before being applied to the engine system, or you can purchase ready-made combinations of coolant that already have water added.
Can you top out your BMW’s coolant with water?
Since it is summer, I would simply top off with water (up to max line only, when engine cold). Then watch it closely. If you suspect a leak, go to the dealer right away.
Water topping up is acceptable, but since the coolant system is sealed, it shouldn’t need to be done.
Keep an eye on the coolant level and let your dealer know if you see any loss as this is a common sign of a damaged EGR cooler.
Is there any sign of sooting on the insulation beneath the underside of the EGR cooler? Another indication of a damaged EGR cooler is that.
Mine has experienced this twice in the recent days. I simply added water to top it off. I’m hoping it doesn’t get worse before my duty the following week.
Quote:
2 liters of BMW coolant cost around PS11, I believe. For the ideal blend ratio, combine it 50/50 with water.
If you can’t see it, use a torch to illuminate it. Fill the container when it’s cold so the water or coolant just touches the mark.
FFS, do it in a cold car. If you attempt to remove the cap before it is entirely cold, you risk burning yourself.
Don’t top off with tap water; instead, use that RO water product (I can’t recall its name, but I’m sure someone will confirm). can purchase it in bottles at the grocery store.
Tap water causes that corrosion-causing green substance (sorry, I’m useless; it’s been so long since I’ve had to top any car up).
A damaged EGR housing is what’s causing my low coolant signal. Due to BMW’s lack of inventory in the UK, this item will arrive from Germany the following week.
What is the price of BMW coolant?
A BMW 328i coolant change typically costs between $276 and $315. While materials are priced at $124, labor costs are projected to range from $151 to $191.
Why is the coolant in my BMW low?
You should take your automobile to the automotive service shop as soon as possible for an inspection and maintenance if your coolant is low because it could be an indication of a larger issue. Some of the causes of a possible coolant shortage in your car include the following:
- reservoir leak or overflow tank
- a radiator leak
- radiator hose leak
- water pump leak
- cracked or compromised radiator seal
- defective head gasket
What is the lifespan of BMW coolant?
How frequently should a BMW have its coolant changed? Typically, every 30,000 miles or every two years, you should have a BMW coolant cleanse conducted. Your car may be able to go longer between flushes in specific circumstances.
BMW coolant is what color?
To maintain your cooling system operating at its peak, we advise using only German OEM BMW engine antifreeze, part number 83192468442. (83 19 2 468 442). Because they don’t include nitrites, amines, phosphates, or borates, BMW exclusively suggests specific coolants. It is not permitted to use store-bought coolant from a nearby parts retailer.
2018 saw the introduction of this new green coolant, which has replaced the previous blue coolant. Green can be used on automobiles before 2018 and is backwards compatible with blue. BMW advises against using the older blue formula on vehicles created after January 2018.
The silicates in the green coolant provide further protection for the cooling system’s internals, although the coolant needs to be changed every two years.
For increased corrosion resistance, anti-freeze defense, and water pump lubrication in street cars, we advise combining distilled water in a 1:1 ratio with the mixture. Reduce the amount of antifreeze in your coolant mixture if you want more cooling properties, but only in warmer climates where freezing is impossible (see chart below). We advise monitoring the freezing point of the coolant mixture if you want to use antifreeze and water ratios other than 1:1.
Red Line Water Wetter can also be added if high temperatures could lead to engine banging or pre-ignition.
- Original BMW HT12 antifreeze from Germany, part number 83192468442
- optimum cooling, freeze prevention, lubrication of the water pump, and corrosion resistance
Is BMW coolant leakage typical?
Your BMW might have one problem. Several issues, including a damaged radiator, a poor head gasket, or a frail radiator cap, might cause coolant leakage. You should contact a specialist as soon as you notice a coolant leak as this could cause very serious issues for your engine.
What occurs if the incorrect coolant is used?
The performance of the car can be hampered if the wrong coolant is used or if several types are mixed together. Additionally, the radiator’s corrosion may worsen. It’s crucial to remember that color alone cannot accurately identify the type of coolant you should use. The radiator, water pump, radiator hoses, cylinder gasket, and other components can suffer corrosion and other issues as a result of using the incorrect coolant. Having a qualified auto mechanic handle your vehicle’s maintenance is the greatest method to guarantee that you obtain the right coolant.
Can I substitute water for coolant?
Due to its narrow range of boiling and freezing points and inability to safeguard the engine of your car, water cannot substitute for antifreeze on its own. Additionally, it doesn’t absorb heat as well. You can use water in your coolant rank in a severe situation.
Do I have to wait to drive after adding coolant?
After adding coolant, how long should I let the engine run? The most crucial thing, he continues, is “your own safety.” The engine, hood, and any leaking coolant can all cool down by waiting for at least 15 minutes.
Is it acceptable to combine fresh and old coolant?
There is no issue with combining different brands, and as long as they are of the same type when combining old and new, there is no issue.