- Locate the reservoir of the coolant and clean it.
- Check Level – Ascertain the level of the coolant.
- Determine the type of coolant to use and add the correct amount of fluid.
- Replace the cap on the coolant reservoir and tighten it.
In This Article...
What location does the BMW 5 Series’ coolant go?
The next step, where to put coolant in a BMW 5 Series, is perhaps the one you are most interested in. Now that you understand how crucial it is to maintain the appropriate quantity of this coolant. Here are the many methods to help you identify the expansion tank that holds the coolant for your BMW 5 Series, and finding it is fairly simple:
- Wait a few minutes or so for your engine to warm up before taking any action to avoid getting burned when checking the coolant level.
- Your car’s hood should be opened.
- The expansion tank for your BMW 5 Series’ coolant must be promptly located; it is typically located in one of the four corners of your engine block. To find it, simply search for a plastic container with a black or yellow plastic cap and a hazard emblem or thermometer on top.
In a BMW, where is the coolant located?
Find the coolant reservoir by opening the hood. This tiny black tank is typically located to the left of the engine in BMW models, but it isn’t always the case. If you’re unsure of what to look for, double-check your owner’s manual. Turn the cap slowly counterclockwise to gradually remove the extra pressure.
Do BMWs require specialized coolant?
In addition to controlling engine temperatures, the quality of your BMW coolant is essential for lubricating the water pump, guarding against corrosion and buildup, providing anti-freeze during the winter, and, in some models, assisting in cooling for engine and gearbox oil coolers. Not just any antifreeze will do; BMWs have special coolant needs (nitrite and phosphate free) to prevent build-up and corrosion of metal components. Along with BMW coolant, we also sell coolant additives like Red Line Water Wetter, which lower combustion chamber temperatures and elevate boiling points in order to prevent detonation and banging.
The amount of coolant required by a BMW 5 series?
Models with manual transmissions may hold 10 liters. BMW E60 automatic transmission models’ 8-cylinder engines can carry 14.2 liters of coolant. Models with manual transmissions may hold 13.8 liters. I’ll go over the procedures for changing the engine coolant on BMW E60 vehicles in this article.
Is water need to be added to BMW coolant?
To make the best coolant, they must be mixed. You can purchase antifreeze that is full strength and needs to be diluted with distilled water before being applied to the engine system, or you can purchase ready-made combinations of coolant that already have water added.
Is BMW coolant already blended?
BMW coolant is not pre-mixed when purchased. Simply purchase a gallon of coolant and a gallon of distilled water, then prepare the mixture as necessary. I would simply add a cup of distilled water if it only requires, say, a cup of coolant or water.
Why does my BMW’s coolant gauge show low when it is full?
If the low coolant indicator on your dashboard illuminates, your car may be having one of the following problems:
- The most frequent reason for the coolant light on your car to come on is that the coolant is low. While it’s possible that the car is just short on coolant, it’s more likely that it has another problem that’s causing it to gradually lose coolant over time. You should have your car checked out and serviced if this is the case.
- Faulty Sensor: Your vehicle needs a sensor that measures the amount of coolant in its engine in order to know when the coolant level is low. When the coolant level drops too low, a floating sensor in the coolant reservoir of the majority of automobiles activates, putting on the warning light.
Your vehicle’s coolant sensor may be broken if you check your coolant reservoir and it looks to be full but your low coolant signal is on. The majority of auto repair businesses are able to identify and replace faulty sensors.
BMW coolant is what color?
To maintain your cooling system operating at its peak, we advise using only German OEM BMW engine antifreeze, part number 83192468442. (83 19 2 468 442). Because they don’t include nitrites, amines, phosphates, or borates, BMW exclusively suggests specific coolants. It is not permitted to use store-bought coolant from a nearby parts retailer.
2018 saw the introduction of this new green coolant, which has replaced the previous blue coolant. Green can be used on automobiles before 2018 and is backwards compatible with blue. BMW advises against using the older blue formula on vehicles created after January 2018.
The silicates in the green coolant provide further protection for the cooling system’s internals, although the coolant needs to be changed every two years.
For increased corrosion resistance, anti-freeze defense, and water pump lubrication in street cars, we advise combining distilled water in a 1:1 ratio with the mixture. Reduce the amount of antifreeze in your coolant mixture if you want more cooling properties, but only in warmer climates where freezing is impossible (see chart below). We advise monitoring the freezing point of the coolant mixture if you want to use antifreeze and water ratios other than 1:1.
Red Line Water Wetter can also be added if high temperatures could lead to engine banging or pre-ignition.
- Original BMW HT12 antifreeze from Germany, part number 83192468442
- optimum cooling, freeze prevention, lubrication of the water pump, and corrosion resistance
Is BMW coolant leakage typical?
Your BMW might have one problem. Several issues, including a damaged radiator, a poor head gasket, or a frail radiator cap, might cause coolant leakage. You should contact a specialist as soon as you notice a coolant leak as this could cause very serious issues for your engine.
Why is blue coolant used by BMW?
To maintain your cooling system operating at its peak, use only German OEM engine antifreeze, component number 82141467704. (82 14 1 467 704). Because they don’t include nitrites, amines, phosphates, or borates, BMW exclusively suggests specific coolants. BMW cooling systems typically do not work with off-the-shelf coolant from a neighborhood parts store, and mixing various coolant formulas is not advised (in a pinch you should use distilled water).
The well-known blue coolant, which has been in use since the 1990s, is only permitted for vehicles with model years up to 2018. Internally, it is referred to as the G48 formula and is exclusive to BMW/MINI vehicles. In comparison to other forms of coolant, the blue coolant formula is a hybrid that extends coolant service life and is less harmful to the environment. On vehicles manufactured in 2018 and later, BMW replaced it with a new formulation that contains silicate and offers superior immediate corrosion protection. BMW does not advise using the older blue formula for vehicles created after January 2018.
BMW # 82141467704, genuine German OEM antifreeze
How much does it cost to refill the coolant in a BMW?
A BMW 328i coolant change typically costs between $276 and $315. While parts are priced at $124, labor expenses are predicted to range from $151 and $191. Taxes and levies are not included in this range, nor are your particular model year or special location taken into account.
Which antifreeze does BMW utilize?
No matter what type of car you drive, whether it’s a BMW, Porsche, Mercedes Benz, Audi, Mini, or Volkswagen, your car circulates a solution of water and coolant to dissipate the heat generated within the engine and prevent it from completely melting down (one notable exception are older Porsche models that are air and oil cooled and did not use water or coolant, but instead circulated a large amount of oil to dissipate the heat).
A Spectrum of Colors
Which coolant type is best for your BMW, Porsche, Mercedes Benz, Audi, or Volkswagen out of the many available options? The answer is the kind that was initially installed in your car. Your coolant may be green, pink, blue, yellow, or even clear depending on the manufacturer. All coolants are naturally transparent, and dye is used to give them color. It has no impact on the coolant’s chemical properties that each producer adds their own colour blend. Because the water in Europe is substantially harder than the water in the United States, European manufacturers prefer coolant that is phosphate-free.
Inorganic Acid Technology (IAT), Organic Acid Technology (OAT), and Hybrid Organic Acid Technology (HOAT) are the three most common coolant types available today. A HOAT coolant is used by your BMW, Porsche, Mercedes Benz, Audi, or Volkswagen.
In order to protect aluminum surfaces, silicate is added to OAT coolants to create HOAT coolants. The cylinder heads and radiators, as well as other parts of your BMW, Mercedes Benz, Porsche, Audi, and Volkswagen engine and cooling systems, are constructed of aluminum.
Silicate and phosphate corrosion inhibitors are not used in OAT coolants. These coolants are made to last for 150,000 miles and have a long service life (or 5 years). It should be mentioned, nevertheless, that German Auto Center and the majority of manufacturers advise cleansing or replacing the coolant every two years.
The metal (Iron) components of the engine and cooling system are protected by traditional coolants, which are IAT coolants and use silicate and phosphate corrosion inhibitors. IAT coolants shouldn’t be utilized because the majority of the iron components in your BMW, Mercedes Benz, Porsche, Mini, Audi, and Volkswagen have been replaced with aluminum and other lighter composites.
It’s crucial to keep in mind that modern German performance cars, whether you drive a Porsche, Mercedes Benz, Mini BMW, Volkswagen, or Audi, will last you for many miles and years if you maintain them properly. German Auto Center in Austin is the place to go for German auto repairs. We will be pleased to help you!
How is a low coolant level fixed?
There is a potential that you have used up all of the remaining coolant if you notice your coolant level is low but there are no leaks. The simplest way to fix low coolant is to start filling it back up to the proper levels and let it soak back into the system. The level of the coolant mixture currently in your tank is indicated by signs like “max” and “min” that you can see when you open your radiator cap. The low coolant problem should be resolved by simply filling the vehicle’s tank to an appropriate level (below the “max” line); nevertheless, continual monitoring for a week after filling is advised to make sure there is no coolant leak.
Can I operate a vehicle with little coolant?
Electric cars, hybrid cars, diesel engines, and gasoline engines all inherently produce heat. Some of this heat is directed into the interior of your automobile when you turn on the heater for comfort. However, there are other ways to control the majority of the heat.
Your car relies on a liquid known as antifreeze, sometimes known as engine coolant, to guarantee that the engine maintains an ideal working temperature. Driving with insufficient coolant could cause your engine to overheat, which is usually bad for your engine, your car, and your trip!
Can I add coolant to my car without flushing?
A simple coolant top-off is not problematic. Without draining out the old, you can add the coolant. However, the older coolant eventually turns acidic. Corrosion may result from this, which may then lead to cooling system flaws. The majority of manufacturers advise replacing the coolant every 30,000 miles.
How soon can I drive after adding coolant?
After adding coolant, how long should I let the engine run? The most crucial thing, he continues, is “your own safety.” The engine, hood, and any leaking coolant can all cool down by waiting for at least 15 minutes.