How To Program BMW 328I Key?

BMW key fob should be taken out of the ignition. Press the lock button (the BMW logo) three times while still holding down the unlock button, and then let go. If you need to program more than one key fob, go back to step 3 within 30 seconds following the first key programming.

In This Article...

How to Use Your BMW Key Fob Remote

Although pre-programmed for your car, your key still needs to be activated in order to be used.

Hold your new key fob flat on the dim battery indicator next to the steering column to accomplish this. After then, keep pressing the start/stop button until the “no key” warning light goes out. To check that activation was successful, press the start/stop button once more.

If this doesn’t work, you might need to activate your new key while removing your old key fob from the signal range to avoid interference. To accomplish this, first unlock your BMW with the existing key before having someone carry the key a short distance away from your car. After that, you can push the start/stop button while holding your new key against the steering column.

Consistent SEO at the OBD2 company

Here are some instructions for creating a remote key fob for a 2002 BMW 3 series:

Approach 1:

working inside the car with the doors closed.
In five seconds, return to the off position after turning the ignition to position 1.
After removing the ignition key, hold down the unlocked button for 15 seconds. You must push the key lock button three times in quick succession over the course of 15 seconds.
Do the same button pressing within 30 seconds if you have another key.
To complete, turn on the ignition.

Note: The remote control portion of the key is programmed during this programming process. Any transponder chip used by the immobilizer (which prevents the automobile from starting) cannot be programmed; this must be done by a professional. In order to have your remote programmed to your automobile using diagnostic equipment, you must go to your neighborhood dealer or locksmith.

Approach 3:

One functional key and one key that has to be programmed are required for this procedure.

1. Enter and lock every door.

2. Quickly start the ignition and turn it off. Start the process now (no more than 5 seconds). 30 seconds must pass before the next action is taken.

3. Take the first key out.

4. To get the key closer to the antenna on the remote control, hold it up near your left shoulder.

5. Press the lock button three times while holding down the unlock button. As soon as the unlock button is released, the doors lock to authenticate the procedure.

Repeat steps 4 and 5 quickly for key #2, etc.

How do I set up the key for my 2010 BMW 328i?

How to Set Up a New BMW Key Fob Take out the key. Press the BMW logo three times while holding down the unlock button, and then let go. Within 30 seconds after the initial key programming, repeat step three if you still have more keys you’d like to program. To finish the procedure, start the engine.

How is a key fob for a 2009 BMW 328i programmed?

How can I program my BMW key?

Steps for Programming a New BMW Key Fob After then, remove your key from the ignition. While keeping the unlock button depressed, press the BMW logo three times on your BMW key fob. After pressing the BMW logo three times, release the unlock button. Once the ignition is turned on, your new key should be associated with your BMW.

How can I program my key fob for my 2010 BMW?

BMW Smart Keys:

Start the vehicle by placing the new key fob against the designated location on the right side of the steering column (obviously a working key fob is needed). It only required that to make the new fob functional. In reality, the Nav screen appeared right away and asked for a name for the profile connected to the new key fob.

One crucial detail is that this will only function with a “NEW” smart remote or key. In order for the instructions in this thread to function with a used smart key, it must first be “FLASHED” or reset.

1. Operating inside the car with the doors closed

2. Within five seconds, switch the ignition from position 1 to off.

3. After removing the ignition key, press and hold the unlock button for 15 seconds. Then, within a 5-second interval, press the key lock button three times.

4. Let go of the buttons.

5. Doors will lock and unlock to demonstrate that proper programming has taken place.

Approach 2:

One key that is already programmed and one key that needs to be programmed are required for this procedure.

1) Enter and lock every door.

2) Start the ignition and swiftly turn it off. Start the process now (no more than 5 seconds). 30 seconds must pass before the next action is taken.

3. Take out the first key.

4) To put the key closer to the antenna on the remote receiver, hold it up towards your left shoulder.

5) Press the lock button three times while keeping the unlock button depressed. As soon as the unlock button is released, the doors lock to authenticate the procedure.

6) Quickly carry out steps 4 and 5 for key #2 and so forth.

If that doesn’t work, try pressing the keys in reverse. 1 then 2, as opposed to 2 then 1.

1. Quickly turn the key to position 1 five times. 2. Take out the key. 3. Hold the unlock button while pressing the lock button three times.

4. Within 30 seconds, press the same button if you have another key. 5. Start the engine to complete.

PLEASE NOTE: This programming process modifies the key’s remote control component. Any transponder chip for the immobilizer (vehicle starting) cannot be programmed; a professional must do it. You must use diagnostic tools to have your remote configured to your vehicle at your neighborhood dealer or locksmith.

Want a professional to configure the remote for you since you’re having problems doing it yourself? Find a qualified key fob installer in your neighborhood by typing your city or zip code in the search box below.

Was this Knowledgeable? Please consider making a gift of any kind to support this blog! Your contributions aid in the upkeep of this website. We appreciate your visit and donation.

How is a 2014 BMW key fob programmed?

Press the lock button (the BMW logo) three times while simultaneously holding down the unlock button, and then let go of the unlock button. Repeat step three with the extra key(s) within 30 seconds of programming the first key if you want to program more than one BMW key fob at the same time.

How can my BMW key fob be reset?

Utilize your metal key to unlock your BMW.
Place the ignition key in the lock.
A key is turned to the on position.
Put it in the off position right away.
Remove the key from the ignition right away.
Next, hold down the key’s unlock button for a few seconds.
Finally, three times press the lock button on the key.

Why won’t my BMW key turn?

You’ll need a CR2032 battery if your key fob is functioning well but your BMW key fob battery has to be changed. Make sure you’re using the appropriate size of these tiny cells, sometimes referred to as “watch batteries.”

How can I obtain an additional BMW key?

A recent news story claimed that 30% of car owners lose their keys every week. Even while it may occasionally be a little inconvenience, vehicle owners can avoid having their day ruined by it with a little advance forethought. Obtaining a backup key is the most effective approach to make this happen.

Every year, cars get more technologically advanced, and what was once just a basic metal key keeps evolving into a smart fob with a variety of features. You have three choices for getting a new or replacement key for your BMW:

You can cooperate with your neighborhood BMW dealer.
You can work with a neighborhood locksmith business that has the skills necessary to duplicate and program BMW keys and fobs.
You can obtain a “blank” replacement key and fob online, then take it to your neighborhood dealer or locksmith to have it programmed and cut once it arrives.

You will need to have your own personal identifying information, such as the BMW’s VIN and the year and model, in order to use any of these choices. In addition, you’ll need to have identification from the government and documentation showing your identity as the car’s owner. It may seem obvious, but having the necessary information on hand will speed up the process of procuring a replacement key if you find yourself in need of one after locking yourself out. The situation might become less stressful as a result of this.

The dealership may require you to tow your car there so they may make your replacement key if you opt to use them in an emergency and need the replacement key right away. They can come to you if you choose a trained local locksmith, which will save you time, money, and stress.

Can I program my own car key?

There are a few manufacturers who will let you program a single key even if you don’t have a working key. Remember that you’ll still need to have the key cut to suit the ignition, which necessitates presenting the locksmith with evidence of ownership.

Nevertheless, it is far easier to do this than to program a second or third key:

Turn the ignition to the on position after inserting the key. Just the electronics, leave the engine off.
After 10 minutes and 30 seconds, switch off the light by turning the key.
Restart the key, then wait another 10 minutes and 30 seconds before turning it off once more.
Thirdly, repeat the procedure.
To program the key, turn it back to the on position.
In order to test your new key, start the engine.

Without the original, how can a key fob be programmed?

After locking every door, turn the ignition off. Set the accessory or “ACC” position on the ignition key. The door locks will cycle once once you turn the ignition key off once more. To program the key fob, press any button three times straight.

BMW may operate without a key fob.

You won’t be able to use keyless entry or remote unlocking if your BMW has Comfort Access if the battery in your key fob has died. You can still enter and manually start your automobile, though.

Press and hold the key release button at the remote fob’s base while unlocking the door of your car, then slide out the internal key blade. This can be used in place of a standard key to unlock your car. You can locate a little hole on the bottom of the handle if the keyhole is hidden on your car door. Use the key blade to pry off the trim panel and expose the keyhole by inserting it into the hole.

Once you’re inside, put your remote key fob in the ignition slot or, if your car doesn’t have one, press it up against the steering column’s key markings. If your key fob dies, you will still be able to start your BMW using the start/stop button on the dashboard.