Turn the ignition of the automobile five times fast to position 1 and back. Remove the ignition key from the car. Press the BMW logo three times while holding down the unlock button, and then let go of the button. Repeat step 3 within 30 seconds after the initial key programming if you want to program any more keys.
In This Article...
How to Use Your BMW Key Fob Remote
Although pre-programmed for your car, your key still needs to be activated in order to be used.
Hold your new key fob flat on the dim battery indicator next to the steering column to accomplish this. After then, keep pressing the start/stop button until the “no key” warning light goes out. To check that activation was successful, press the start/stop button once more.
If this doesn’t work, you might need to activate your new key while removing your old key fob from the signal range to avoid interference. To accomplish this, first unlock your BMW with the existing key before having someone carry the key a short distance away from your car. After that, you can push the start/stop button while holding your new key against the steering column.
Key fob remote programming instructions for the BMW 3 Series
Approach 1:
1. Operating inside the car with the doors closed
2. Within five seconds, switch the ignition from position 1 to off.
3. After removing the ignition key, press and hold the unlock button for 15 seconds. Then, within a 5-second interval, press the key lock button three times.
4. Let go of the buttons.
5. Doors will lock and unlock to demonstrate that proper programming has taken place.
Approach 2:
One key that is already programmed and one key that needs to be programmed are required for this procedure.
1) Enter and lock every door.
2) Start the ignition and swiftly turn it off. Start the process now (no more than 5 seconds). 30 seconds must pass before the next action is taken.
3. Take out the first key.
4) To put the key closer to the antenna on the remote receiver, hold it up towards your left shoulder.
5) Press the lock button three times while keeping the unlock button depressed. As soon as the unlock button is released, the doors lock to authenticate the procedure.
6) Quickly carry out steps 4 and 5 for key #2 and so forth.
If that doesn’t work, try pressing the keys in reverse. 1 then 2, as opposed to 2 then 1.
Approach 3:
1. Quickly turn the key to position 1 five times. 2. Take out the key. 3. Hold the unlock button while pressing the lock button three times.
4. Within 30 seconds, press the same button if you have another key. 5. Start the engine to complete.
PLEASE NOTE: This programming process modifies the key’s remote control component. Any transponder chip for the immobilizer (vehicle starting) cannot be programmed; a professional must do it. You must use diagnostic tools to have your remote configured to your vehicle at your neighborhood dealer or locksmith.
How can I program my BMW key?
Steps for Programming a New BMW Key Fob After then, remove your key from the ignition. While keeping the unlock button depressed, press the BMW logo three times on your BMW key fob. After pressing the BMW logo three times, release the unlock button. Once the ignition is turned on, your new key should be associated with your BMW.
My BMW key fob can I program it myself?
New BMW Key Fob Programming from Scratch BMW key fob should be taken out of the ignition. Press the lock button (the BMW logo) three times while still holding down the unlock button, and then let go. If you need to program more than one key fob, go back to step 3 within 30 seconds following the first key programming.
How can my BMW ignition key be reset?
- Utilize your metal key to unlock your BMW.
- Place the ignition key in the lock.
- A key is turned to the on position.
- Put it in the off position right away.
- Remove the key from the ignition right away.
- Next, hold down the key’s unlock button for a few seconds.
- Finally, three times press the lock button on the key.
Why won’t my BMW key b function?
You’ll need a CR2032 battery if your key fob is functioning well but your BMW key fob battery has to be changed. Make sure you’re using the appropriate size of these tiny cells, sometimes referred to as “watch batteries.”
How is an extra BMW key used?
Insert your key if your BMW has an ignition. If it doesn’t, insert the key fob into the slot marked with a key next to the steering wheel. Next, apply the brake while holding it, then push the Stop/Start button.
Can I program my own car key?
There are a few manufacturers who will let you program a single key even if you don’t have a working key. Remember that you’ll still need to have the key cut to suit the ignition, which necessitates presenting the locksmith with evidence of ownership.
Nevertheless, it is far easier to do this than to program a second or third key:
- Turn the ignition to the on position after inserting the key. Just the electronics, leave the engine off.
- After 10 minutes and 30 seconds, switch off the light by turning the key.
- Restart the key, then wait another 10 minutes and 30 seconds before turning it off once more.
- Thirdly, repeat the procedure.
- To program the key, turn it back to the on position.
- In order to test your new key, start the engine.
Can a locksmith create a BMW key?
A recent news story claimed that 30% of car owners lose their keys every week. Even while it may occasionally be a little inconvenience, vehicle owners can avoid having their day ruined by it with a little advance forethought. Obtaining a backup key is the most effective approach to make this happen.
Every year, cars get more technologically advanced, and what was once just a basic metal key keeps evolving into a smart fob with a variety of features. You have three choices for getting a new or replacement key for your BMW:
- You can cooperate with your neighborhood BMW dealer.
- You can work with a neighborhood locksmith business that has the skills necessary to duplicate and program BMW keys and fobs.
- You can obtain a “blank” replacement key and fob online, then take it to your neighborhood dealer or locksmith to have it programmed and cut once it arrives.
You will need to have your own personal identifying information, such as the BMW’s VIN and the year and model, in order to use any of these choices. In addition, you’ll need to have identification from the government and documentation showing your identity as the car’s owner. It may seem obvious, but having the necessary information on hand will speed up the process of procuring a replacement key if you find yourself in need of one after locking yourself out. The situation might become less stressful as a result of this.
The dealership may require you to tow your car there so they may make your replacement key if you opt to use them in an emergency and need the replacement key right away. They can come to you if you choose a trained local locksmith, which will save you time, money, and stress.
How is a replacement key fob programmed?
- STEP 1: Start the engine. All doors should be closed, and you should be seated in the driver’s seat with the key fob and the ignition key.
- Press the lock button in step two.
- Turn off the ignition in step three.
- STEP 4: Repeat Step 3 with more key fobs.
- STEP 5-Start the procedure over.
The cost of a BMW key fob
The price of a 2020 Toyota Sienna fob was comparable. Dealers, however, gave prices as low as $150 to replace a key fob for a 2017 Honda Accord. A number of BMW retailers claimed that the additional security features built into the 2020 X5 key fob justifies the roughly $500 they spend to replace and program one.
Why won’t my BMW key fob function now that the battery has been changed?
A dead battery is the most frequent cause of a key fob not functioning. Having said that, your keyfob might be having more serious issues. You might require a key fob replacement or perhaps auto door lock repair if your key fob stops operating after a battery change.
How are key fobs programmed by locksmiths?
You will need to contact an automobile locksmith (or dealer) to help you if you are unable to self-program your keys (either because there isn’t a process for doing so, you don’t have the necessary number of functioning keys, the tools/computer/software needed is too expensive, or all of the above).
In order for auto tool makers to create software and hardware that enables them to program their vehicle keys, the majority of US and Asian auto manufacturers share their programming protocols with them.
In order to provide programming as a service to their clients, the locksmith then obtains this equipment.
An automobile locksmith will insert a computer with the necessary software into your OBD port below in order to program a car key, remote, or FOB (commonly found below your dashboard).
Many different businesses provide computers and software for programming. They frequently offer support for many car makes and models.
No system can program all the makes and models, thus a locksmith who wishes to repair car keys may have to make a significant investment in these equipment.
The locksmith will be able to add and remove keys from the car using the programming software. Because of the following, this is helpful:
- Some vehicles, like Fords, only let a certain number of keys into the vehicle’s computer system. Ford vehicles can only have a maximum of four keys. In order to make room for your new key to be programmed, a locksmith might utilize a computer to delete keys that are no longer in use.
- It is possible to remove keys from the vehicle after they have been lost or stolen so that they can no longer be used to unlock the doors or start the vehicle (for FOBs/Smart Keys).
However, a locksmith cannot program keys on these computers nonstop. Most often, a “token” system is in place that restricts the computers’ ability to program the car to times when a pre-paid token is available for use.
Tokens are required for programming, and one token is required for each try, according to your neighborhood locksmith. As a result, the locksmith has to pay for each attempt at programming a car key. The programming cost the locksmith charges already includes this.
Depending on who is providing the code, the vehicle, and the locksmith employed, the cost to program a car key can range from $25 to $100. The price will be higher if a second code (a skim code) is required.
Adding a skim code is necessary when attempting to program some automobiles. This code is available from the vendor, but at a price. This fee, which is typically $60, is transferred to you.
By giving the dealer your title in person, you might be able to obtain this skim code on your own. They typically don’t charge the owner of the vehicle because they believe this to be information that belongs to you. Normally, you have to collect this information in person, but it could help you save some money on the price of getting a backup key.
Note: German automakers do not divulge their procedures (see article). Therefore, you will almost probably need to go to a dealer and, sure, it will cost much more if you own a Mercedes, BMW, VW, Porsche, etc.
Ask the vendor if you can purchase the key or fob elsewhere if you have one of the aforementioned items. Some of these vendors will only program keys they sell directly to customers and won’t program keys that were outsourced. However, if they DO program/cut them, you might be able to save some money on the key’s price.