Although pre-programmed for your car, your key still needs to be activated in order to be used.
Hold your new key fob flat on the dim battery indicator next to the steering column to accomplish this. After then, keep pressing the start/stop button until the “no key” warning light goes out. To check that activation was successful, press the start/stop button once more.
If this doesn’t work, you might need to activate your new key while removing your old key fob from the signal range to avoid interference. To accomplish this, first unlock your BMW with the existing key before having someone carry the key a short distance away from your car. After that, you can push the start/stop button while holding your new key against the steering column.
In This Article...
How is a key fob for a BMW 328i programmed?
BMW key fob should be taken out of the ignition. Press the lock button (the BMW logo) three times while still holding down the unlock button, and then let go. If you need to program more than one key fob, go back to step 3 within 30 seconds following the first key programming. Activate the ignition.
Can you program your own BMW key?
Take the BMW key fob you want to configure, hold down the unlock button, and then press and hold the BMW logo three times. The doors should lock and unlock once more. When this occurs, you are ready to go! You’ve set up your BMW key fob.
How is a replacement key fob programmed?
- STEP 1: Start the engine. All doors should be closed, and you should be seated in the driver’s seat with the key fob and the ignition key.
- Press the lock button in step two.
- Turn off the ignition in step three.
- STEP 4: Repeat Step 3 with more key fobs.
- STEP 5-Start the procedure over.
Without the original, how can a key fob be programmed?
Turn the key back to the “Off” position while holding down the lock button on the fob. At least three times, go through this process, finishing with the key in the “On” position.
This notifies the electronic control modules in your automobile that the signal is coming from your key in the ignition, and it then saves the information.
How can I program a key for a BMW 3 Series?
Turn the ignition of the automobile five times fast to position 1 and back. Remove the ignition key from the car. Press the BMW logo three times while holding down the unlock button, and then let go of the button. Within 30 seconds of the initial key programming, repeat step 3 if you want to program any additional keys.
Do BMW keys require programming?
Key fobs that have been activated as detailed above can only open your car manually and cannot be used with the Comfort Access feature in E Series BMWs and MINIs.
It is important to code your car to erase the old key profile and set the new key for Comfort Access use in order to activate your new key fob for use with Comfort Access. This can be done at your neighborhood BMW/MINI dealership or we can remotely code it for you.
Our touchscreen key fobs for BMWs from the G Series don’t need to be programmed to function with your particular BMW.
Can I set up a key fob on my own?
Yes, a replacement automobile key can be obtained without the original. Since people frequently misplace their car keys, replacing a misplaced car key is an easy operation. Nevertheless, depending on the key type, it could be pricey.
A key fob is a little electronic gadget that you can use to remotely lock and unlock your car. Other capabilities of the fob could include a remote engine starter, a trunk opening, or a proximity system that allows you to open your car without taking the fob out of your pocket.
Depending on how sophisticated the key technology is, replacing car keys can be expensive. An old metal key can be duplicated for less than $10 at a hardware store. On the other hand, the most recent smart keys must be ordered from a dealer and might cost between $200 and $500.
Your car key’s battery can be changed easily by opening it up, identifying the battery type, and going to the store. If you’re unsure of how to open the remote, it pays to consult your owner’s manual because you don’t want to force anything open and break it.
Today’s automobile keys are more secure and capable thanks to technology, but the gain isn’t free. The majority of modern keys feature complex electronic parts that must be configured before usage.
You may be able to buy an after-market key fob via a locksmith or online if your automobile is more than five years old. These sorts of fobs range in quality, but they are less expensive than other options.
You might be able to program a replacement yourself, depending on the make and type of your vehicle. The steps for programming a key fob yourself can differ: Owner’s manuals from certain automakers include instructions. In many circumstances, information can be available online. The catch is that in order to complete the process quickly or at all, you might need two functional key fobs.
It’s wise to acquire and program a backup remote before you require it. Additionally, a lot of used-car buyers (particularly auto dealers) will pay more for a vehicle with at least two functional key fobs or sets of keys.
A misplaced automobile key can indeed be replaced by a locksmith. If you have the option of receiving your replacement key from a locksmith or the dealership, the latter may be less expensive. Before making a choice, be sure to inquire about prices with your nearby vehicle dealership.
How do I set up my BMW remote control?
Tap the unlock button while keeping it depressed, then quickly press the BMW logo three times. Following that, take your finger off the unlock button. Repeat step four with each additional fob within thirty seconds of syncing the original if you need to program more BMW keys.
Why won’t my BMW key fob function now that the battery has been changed?
A dead battery is the most frequent cause of a key fob not functioning. Having said that, your keyfob might be having more serious issues. You might require a key fob replacement or perhaps auto door lock repair if your key fob stops operating after a battery change.
Without a key, how do you start a BMW 3 series?
Even if your E90 doesn’t have comfort access, there is a way to start the engine and start driving without a key. A BMW anti-hijack feature, that is. Simply put the key in the ignition and start the vehicle as usual. Once you’ve finished, turn off the engine and take the key out of the ignition. Pushing the start button now without a key will start the automobile in roughly 10 seconds, allowing you to take off. Although many of you may already be aware of this feature, I figured I should still share it with those who don’t realize that their BMW has it.
It’s more of a safety feature than anti-hijack. The automobile will still start if you have a key issue and stall out on the railroad lines, allowing you to get off the rails.
done this previously. After considering the potential consequences, I decided to stop using the “DIY comfort access” method. hehe. however, thank you for posting for others.
It works for both my 2007-1 series and 2008-3 series coupes, however if you open the driver-door or wait a little bit longer before restarting the engine, this option is disabled. I tested this about a month ago.
Since learning about it on this forum, I’ve been doing this for approximately a month. I haven’t had any problems with it, and yes, I also use it to warm up my car. No need to panic because the radio turns off after a few minutes, and in case you’re wondering, the car will still be running even if the key fob is distant from the vehicle. I put this to the test the other day when I visited Walgreens.
I do this to get my car warmed up. not necessarily to warm the engine up, but more to warm my seat and the cabin. It’s excellent if my car is parked on the street or somewhere else where you can’t leave the doors open while it warms up. (Or use the laser key to unlock the door)
I regularly engage in this. You don’t even need to hold the brake pedal down; just reapply it, press the start button, lock your doors, and dash into the store or back into your house. However, I suppose you have leftover heat if you are entering the store.
Yes, I’d rather to take a chance than have my valve train begin to tick because they aren’t getting lubricated during short trips when the car isn’t warmed up. I appreciate the guidance nonetheless.
SURPRISINGLY, not every recommendation made by businesses is in your best interests. They’re a business, so if they can convince you to ignore your automobile and end up having to pay for more extensive repairs later on, they win.
Not to bring up an old topic, but wouldn’t starting the car twice be necessary for those who use this method to warm it up? Since the initial cold start is the toughest on the engine, I believe it is best to let the car warm up at that time rather than turning it off and putting it through a second cold start. Any thoughts?
The cost of a BMW key fob
The price of a 2020 Toyota Sienna fob was comparable. Dealers, however, gave prices as low as $150 to replace a key fob for a 2017 Honda Accord. A number of BMW retailers claimed that the additional security features built into the 2020 X5 key fob justifies the roughly $500 they spend to replace and program one.
How can a car key be programmed with just one key?
There are a few manufacturers who will let you program a single key even if you don’t have a working key. Remember that you’ll still need to have the key cut to suit the ignition, which necessitates presenting the locksmith with evidence of ownership.
Nevertheless, it is far easier to do this than to program a second or third key:
- Turn the ignition to the on position after inserting the key. Just the electronics, leave the engine off.
- After 10 minutes and 30 seconds, switch off the light by turning the key.
- Restart the key, then wait another 10 minutes and 30 seconds before turning it off once more.
- Thirdly, repeat the procedure.
- To program the key, turn it back to the on position.
- In order to test your new key, start the engine.