There is a display setting dubbed “showroom mode” on BMWs with digital cockpits.
The showroom shows an animation of the speedometer, tachometer, and numerous computer functions when it is turned on.
The steps listed below can be used to reach the showroom mode menu:
- Activate the start/stop button.
- The iDrive screen will display the message “Diagnostic Mode Active” as a result.
- Hold down the upper computer select button on the left-hand stalk for 20 seconds.
- On the instrument cluster display, the menu screen will show.
- four times on the computer select button
- This button must be depressed for 10 seconds before the menu item “showroom mode” appears.
- Ten seconds of menu-pressing is required.
- Two blank tick boxes with the labels “Autom. Presentation” and “Simulation On Displays” are visible on the iDrive screen.
- The animation begins when both check boxes are selected.
In This Article...
How to Use the DIS Software to Reset the BMW Transport Mode
Owners of BWM vehicles frequently unintentionally activate the Transport Mode and restrict certain vehicle features. Transport Mode can be reset using the DIS Software, albeit many users find it difficult to do so. We’ll walk you through the steps involved.
A thorough video on how to utilize the DIS Software to reset Transport Mode was made by the YouTube channel Revive My Ride. View it in the video down below.
When you let your battery run completely flat, the BMW Transport Mode may inadvertently engage. The throttle response, interior lights, radio, air conditioning, sunroof, and other features are all deactivated while the vehicle is in Transport mode.
The Transport Mode was first created to stop the batteries from getting discharged while the car was being transported from the manufacturing to the dealership. Typically, you can reset the Transport Mode by going to your neighborhood service dealership. Using the DIS program, you can also complete the task yourself. A dealer-level BMW diagnostic tool called DIS was created for BMW dealers who used the GT1 system. It is employed to carry out diagnostics, programming, coding, live data display, module reading, and fault reads.
Special thanks to Revive My Ride for providing the in-depth video instruction. To see more of his informative videos, visit his YouTube channel.
You can get remote coding support for a flat fee here: https://bit.ly/RemoteCodingAssistance if you require any help coding and programming your BMW.
Upon reading the site, it appears that my car is in transport mode (AC only through defrost and floor), but I have yet to find a solution. The battery did run out, so I had to jump the vehicle. It’s fine now, aside from this problem, once I put it on my Tinder. Guys, please help me out! TX is hot!
In January of this year, I purchased a Z4 coupe that was in Transport mode. I brought it to a BMW service center, and they used a computer to put it back in regular mode. Cost…$159.00. The tech probably took no longer than five minutes to make the correction.
Since then, for only a few dollars more than the price of that trip to the service department, I bought a Schwaben Professional Scanner that was recently on sale. The scanner will perform all of the same tasks as the dealership and much more.
My car was set to transfer. I brought it into a small business. After paying them $85 and giving them 10 minutes of their time, they “switched off” transport mode, and my AC started working again. You will need to take it to someone who does if you don’t have a scanner.
Make sure the dealer actually disables it so it can’t turn on again if you do decide to take it in. There are still a lot of Z4s on the market that have never had it disabled, despite the fact that this was meant to have been done on the PDI so that people wouldn’t have to deal with it.
I used the INPA program to address this problem. It took a minute or so. The software has been in my possession for a while now. I can tell you that the software has allowed me to save roughly $1,000 over the past two years. I invested seventy dollars in the program. For a shade tree mechanic like myself, software has completely changed the game.
I use inpa program. I’m curious where in the menu you can locate that. Just interested in case I encounter it or need to turn it off on a car in transport mode since I’ve never had to seek for it.
Honestly, though. According to what I’ve read, dealerships use it to transport cars in order to protect parts like the alternator and battery from further harm. It stops your air conditioner from blowing ice.
How to remove the transport mode on a 2012 BMW X6 E71 using Autel MaxiSys Elite
Attention:
Before turning off transport mode, the vehicle should have the battery master switch uninstalled!
Anyone with knowledge of how to exit transport mode?
A long time ago, the battery ran flat, which led to several defects of every type. With the exception of being stuck in transport mode, which affects things like the heater and heated rear window, etc., I was able to overcome all of them.
Additionally, I believe I need a new battery because it seems to lose power every time it is not used for a few days.
It won’t come back because I can completely erase it rather than merely disable transport mode.
You can also test the battery to see if that is the problem, or if a parasitic drain is the issue, you can find a solution for it.
How can I disable transport mode?
- key to the “on” position.
- Watch for the bells to end.
- five times on the brake pedal.
- five times on the four-way flashers.
- When not in transport mode, the horn will honk.
What switches on the transport mode?
When the Model S is being winched onto a flatbed truck, Transport Mode keeps the parking brake disengaged. When turned on, Transport Mode shows a notice saying the car will continue to roll freely. To activate Transport Mode, you need to have the following:
- power with low voltage. The touchscreen cannot be used to launch Transport Mode if
- The Model S must recognize a key. The only time Transport Mode is active is when a key is found.
For Transport Mode to be engaged:
- Verify that the car is in park.
- Make sure the Model S is secure and chock the tires.
- Hold down the brake pedal while touching Controls > Service > Towing on the touchscreen. A message on the touchscreen serves as a reminder of how to move a Model S safely.
- The Transport Mode button must be pressed and held down until it becomes blue. The Model S is now free-rolling and may be winched or rolled over short distances at a modest pace (no faster than walking speed).
Use self-loading dollies or tire skates if the electrical system is down and you are unable to use the touchscreen to activate Transport Mode. Always review the manufacturer’s recommendations for loading capacity and specs before doing so.
How can you stop the 2021 Escalade’s transport mode from running?
Start the car, turn on the warning flashers, depress the clutch or brake pedal (for manual transmissions), and then press and hold the Start/Stop button or turn the ignition key to the crank position for 15 seconds to toggle the transport mode on or off.
Can a BMW be used in many driving modes?
While driving my BMW, I wish to experience some improved performance. I’ve read about sport mode, but I’m not certain if I can turn it on whenever I want. Can I put my BMW in sport mode while I’m driving?
In less than two minutes, find out if your auto insurance is being overcharged.
Driving a BMW in sport mode will give you the best performance possible from your vehicle. All you have to do is drive while shifting the stick to the left. Your instrument cluster should alter to show that you are in sport mode, which is indicated by the letters DS.
Your car will shift into sport mode at a higher RPM, resulting in improved performance and acceleration.
Since the BMW is a luxury vehicle, you could discover that your auto insurance is a little on the expensive side. However, by using the Jerry app to compare prices, you should be excited about your new, more inexpensive premium.
Jerry is a certified insurance broker who can quickly get the best quotations from more than 50 highly regarded insurers. Jerry can assist you with purchasing new insurance and canceling your old policy if you discover a fantastic deal. Every year, users save $887 on average.
How can the transport mode be disabled on a 2022 Malibu?
There is no need for testing or repairs. It will be essential to switch on the hazard flashers, turn the ignition key to the crank position, and then hold it there for 15 seconds in order to turn the transport mode on or off. The Battery light will dim and the Transport Mode Off message will appear.
My automobile entered transport mode, why?
When I was cleaning my car, the radio suddenly stopped working, and a black screen appeared with the message “Transport mode, Call Dealership.” I’ve never seen that before; does anyone know what it means specifically? [rant] [mad]
Some modules (including the IPC and the BCM) are set to factory mode during the construction of the vehicle. The vehicle is switched to transport mode once the build is finished.
When the vehicle is not in use for extended periods of time, the battery drain is reduced by using the transport mode. While in the transport mode, a number of system features can be changed or disabled. The IPC shows TRANSPORT MODE in the message center when in transport mode. It is possible to switch from transport mode to regular operation mode.
When did you get your car? Normally, the dealer will turn off transport mode when preparing the car.
It goes without saying that it is uncommon for transport mode to re-enable itself after being disabled.
Can an automobile be operated while in transport mode?
On GM models, the red battery telltale will be blinking and, if fitted with a Drivers Information Center (DIC), it will display a Transport Mode On message to notify the operator that the mode is on. When the car is in transportation mode, driving is safe.
What does active vehicle transport mode mean?
The Transport Mode is designed to be used when shipping new GM models from the assembly facility over great distances. When turned on, it lessens the parasitic electrical load that the battery must handle when the car is parked, allowing the battery to stand for up to 70 days before dying.
New GM models may display a Transport Mode On message on the Driver Information Center and/or flash the red battery light if Transport Mode is not disabled prior to vehicle delivery. (Fig. 18)
The following features will be disabled 24 hours after Transport Mode is activated, therefore the key must be used to start the car with the engine off. Remote keyless entry, content theft, and passive entry. The Remote Keyless Entry capability is kept active during Transport Mode on the 2016–2021 Escalade, Tahoe, Suburban, and Yukon models, allowing entry without a key. The effectiveness of exit lights timers has decreased.
The key fob will function to enable use of the Engine Start/Stop button in new vehicles with Passive Entry/Passive Start (PEPS) while Transport Mode is on and the key fob is inside the car.
With the ignition in Run, the Remote Keyless Entry and Passive Entry features are once again functional.
Turn on Transport Mode and follow these instructions to get into the car:
- With the key fob, try to open the car.
- If the key fob is not working to unlock the car, try pressing the PEPS door handle switch a few times (if it is equipped) before trying again with the key fob.
- The key must be used to unlock the vehicle if the key fob is not working.
- Activate or deactivate the Transport Mode according to your vehicle’s instructions.
During the time the car is in the dealership’s inventory, Transport Mode should be kept on. Additionally, if the customer plans to store the car, they might choose to use the Transport Mode. The process for switching Transport Mode back on and off is the same.
Refer to Power Mode Description and Operation/Transport Mode (If Equipped) in the relevant Service Information for the steps to switch Transport Mode off/on for a certain GM model.
The typical PDI process time includes turning off Transport Mode on vehicles that were dispatched from the assembly plant with the feature turned on.