If while driving a drivetrain error appears out of nowhere. or if you notice a problem with the transmission or delivery of power. The first thing you should do is stop your automobile in a secure location. After turning off the engine, let it a few minutes to sit.
By doing this, you can temporarily fix your car’s drivetrain malfunction error so you can return home. Restart your automobile and proceed to drive back normally after a short while.
It is advisable to keep going if your car has already entered limp mode. Call your dealership or look for a BMW mechanic when you get back to your location.
In This Article...
Examine the BMW engine properly.
Due to the BMW drivetrain malfunction reset that is carried out by the engine restart, the drivetrain malfunction message on the iDrive screen may occasionally disappear after an engine restart. However, if restarting the engine doesn’t solve the problem, thoroughly inspect the car’s engine.
Step 2: Pull the hood-release part from under the dashboard to raise the hood.
Causes, reset, and cost of a BMW drivetrain malfunction
The sophisticated and intelligent system in a BMW will alert you to any issues. You can quickly determine what’s wrong by taking a quick glance at the dashboard, which includes any warnings for BMW Drivetrain Malfunction.
The following are the main reasons for BMW drivetrain issues:
- worn-out spark plugs
- failure of the ignition coil
- fuel pump failure
- harm to the catalytic converter
- leak of transmission fluid
- antiquated differential fluid
- CV joint problem
- gasoline of poor grade
- chain breaking in time
- fuel injector issue
One of the first steps to take when a BMW drivetrain malfunctions is to reset it. The engine may be restarted, the engine’s underside can be inspected for damage, and an OBD II scanner can be used to investigate the issue further.
When there is a drivetrain issue, take prompt action. Depending on the severity of the issue, a professional repair can cost between $2,068 and $2,108.
Continue reading for more information about BMW drivetrain dysfunction, including its causes and fixes. We’ll cover all the other information you need to know, as well as the cost of repairs.
Try to restart your vehicle.
If this occurs as you are driving, park your vehicle in a secure location. Next, wait for five to ten minutes before starting your engine again. Restarting the onboard computer would fix the issue if the error was due to a malfunction.
For some models, turning the car off and on again fixes the check engine light issue. Due of the BMW’s drivetrain issue, this will not function.
Why does my BMW indicate a drivetrain issue?
Understanding the meaning of a BMW drivetrain warning will help you save a lot of trouble. A transmission or engine issue is indicated by a drivetrain malfunction message or signal on a BMW by the Engine Control Module (ECM) of the vehicle.
The terms Digital Motor Electronics (DME) and Engine Control Unit (ECU) are sometimes used to refer to the Engine Control Module.
The Engine Control Module immediately reduces the car’s maximum torque output if the BMW computerized system notices a powertrain issue to avert any impending damage.
What is a BMW 1 Series drivetrain malfunction?
Over the past month, I drove the car a little too hard three separate occasions and received this warning each time. My automobile is only three years old, and already this is happening.
In reality, there was no power loss; the sports mode just stopped when this warning appeared. When I switch the ignition off, it goes away.
I gave the car a hard drive again just before writing this, and the problem was gone.
There must be some value in tolerance, however the error message is quite ambiguous. It doesn’t even specify whether the problem is with the gearbox, the engine, or possibly something else. I advise attaching a diagnostic tool to the vehicle and reading the problem messages to check for a more detailed hint.
If the automobile enables you to drive even though it just displays the “Drivetrain” warning, the auxiliary water pump is probably to blame.
As you mentioned, when it is broken, the sensors go berserk. You can see that your water temperature changes if you can access the hidden menu.
11518616992 is the part number if such is the case. The coolant and antifreeze should be refilled as well once the water pump has been changed.
According to my limited knowledge, the N13 engine’s turbine valves are a regular cause of this problem. According to reports, these turbine valves are frequently exhausted by DSC power seizures.
Hi! I appreciate your responses. You might have actually hit it. I took out and replaced the default blowoff valve on my FastBits DV+ since it was making a metallic noise (clicking sound). The first occurrence of this warning occurred a week later.
Okay, so I bought a garage $50 USD to connect their diagnostic gear and show this to me:
Hello everyone, I just bought a 2014 M135i that has 35000 miles on it and operates flawlessly when driven sensibly. It was marketed as having 420 horsepower with pops and bangs. The automobile comes up with a drive train issue when I put my foot down. It will begin malfunctioning occasionally when this message appears, but not always. When I connected my scanner, the following codes appeared: 102001, 11a002, and 123511.
Could this be a bad/cheap remap, or has anyone else experienced similar problems? According to my research, many people have similar problems and try changing parts without success.
Since purchasing my 2012 116i in July, this drivetrain issue has occurred three times. Every time I’ve experienced it, I’ve simply stopped and restarted the car, and it has always gone away and hasn’t returned. Although it seems strange, I haven’t given it much thought because it is inconsistent and it has been raining approximately two-thirds of the time. Could the rain possibly affect a sensor? Almost everything else about the automobile appears to be in order, with the exception of the absurdly high oil usage.
What does a drivetrain issue on a BMW X3 mean?
My 2013 BMW X3 has been displaying a drivetrain failure notification ever since I recently went camping in it. Why does this matter?
In less than two minutes, find out if your auto insurance is being overcharged.
Your 2013 BMW X3 will show the drivetrain malfunction notification anytime there is a problem with the engine or transmission. It frequently occurs after heavy or quick acceleration or on steep hill. Other indications of a drivetrain issue include:
- the exhaust pipe on your car is smoking
- shaking when accelerating or driving
- rough idling or stalling a lot
- The transmission shifts into first gear
- difficulty starting your vehicle
Alternatively, your drivetrain failure light can suddenly appear. In either case, it’s crucial to respond to the warning as quickly as you can. Restarting your engine is the simplest technique to get rid of it. However, if it doesn’t fix anything, you might want to get a second opinion from a mechanic. Alternatively, you might use a scan tool to perfect a diagnostic reading on your automobile yourself.
Consider spending some time to discuss your auto insurance coverage with Jerry after you take care of your drivetrain.
Jerry, a certified broker and app, does all the legwork for you by calling your insurer, getting estimates, and assisting you in buying new insurance. Simply download the app, respond to a few questions, and compare personalized quotes from the top insurance companies in the country.
How much does a BMW drivetrain repair cost?
Best in Automotive Repair Replacement powertrain control modules for the BMW 328i xDrive typically cost between $2,096 and $2,137. While parts are priced at $1,942 and labor is predicted to cost between $154 and $195.
What does a transmission issue on a BMW mean?
BMW transmission problems have risen to the top of the list of the most severe car problems in recent years.
What precisely does a transmission issue on a BMW mean? The transmissions of the cars will begin to fail, causing a leak of transmission fluid, screeching noises, and terrible burning odors.
If no fast and appropriate repairs are made, the lifespan of the vehicle will be considerably shortened.
Do you believe your car has evolved into a BMW with a trans malfunction? Then take immediate action and read this article to determine whether the symptoms listed are similar to yours.
Additionally, we offer helpful advice that could help you avoid visiting the service centers!
What does BMW’s drivetrain mean?
Your BMW’s performance and functionality depend on its drivetrain in many ways. The engine’s power is transferred to the wheels through it. Sometimes, the terms “drivetrain” and “powertrain” are used synonymously. They do not, however, refer to the same item. So, you might be wondering what makes drivetrain components different from powertrain components.
Your car has more than one component, not just the drivetrain. It is a group of parts that cooperate with the engine to set the vehicle’s wheels and other moving parts in motion. The transmission, differential, wheels, axles, and CV joints are all part of the drivetrain.
The engine is the sole element that distinguishes the drivetrain from the powerplant. One of the many moving parts of a powertrain is the engine. The powertrain is made up of all the moving bits inside the engine and its sections, including the drivetrain’s components.
Its main purpose is to convert kinetic energy into forward motion so that your car can move and your wheels can turn. This is why your BMW’s drivetrain is so crucial. You may hear or feel strange rattling or shaking in your car if one of these components breaks. Let’s examine the parts of the drivetrain in more detail and symptoms of their failure.
What could go wrong with a drivetrain?
Your car’s drivetrain is a crucial component. You’re going to experience issues if your drivetrain fails. But what goes wrong with a drivetrain? What should you do in response to this?
The drivetrain is not just one component of your car. Your car truly moves because of a number of various parts working together.
The drivetrain is a collection of parts that distributes the engine’s power to the wheels, creating the torque necessary for your car to go forward or backward. The driveshaft, axles, transfer case, and transmission are the main elements of the drivetrain. Your car needs to discover the proper ratio to make the wheels and engine work together because they rotate at different rates. In order to maintain an essentially constant engine speed, the transmission modifies the gearbox ratio.
Without a drivetrain, your engine’s output cannot move the wheels, and your vehicle will not move. That means drivetrain issues are very problematic, as you might expect.
The earlier you identify a drivetrain issue, like with any issue, the better. In the long run, knowing what to look for could end up saving you a ton of money and hassles. In light of this, let’s examine some of the most typical drivetrain issues and their typical causes:
- Extreme shaking and vibrating – If your vehicle shakes and vibrates excessively when you shift gears or just while driving in general, your drivetrain is likely having a growing issue. Worn-out U-joints are the main source of this issue. Your drivetrain will shake more and more as they become looser, and if this is not stopped, it could eventually just disintegrate.
- More unfavorable vibrations – Excessive vibration is one thing, but grinding and clunking are different issues that point to more serious issues. When you shift gears or drive, clunking sounds or sensations point to worsening U-joint loosening or even worn-out solenoid packs. Over time, friction surfaces will deteriorate, which might result in issues like clunking and grinding as you shift gears. The latter may be brought on by a shortage of high-quality transmission fluid. And it gets us to.
- Transmission fluid leaks – Drivetrains can suffer greatly from transmission fluid leaks. To keep your gearbox greased and cool, you need transmission fluid. If you have a leak, each time you drive, you could be harming your transmission. After parking, if you notice any areas of reddish liquid underneath your car, take it in for repair. Fortunately, the solution is rather straightforward: transmission leaks must be resealed.