You’ve finished washing; now it’s time to begin polishing. Use a clean cloth and your baking soda mixture to polish the headlights in the same little circular motions. Baking soda works as a polishing agent and aids in getting rid of the yellow hue. The majority of the oxides on your headlights are absorbed by baking soda. Since your headlights have already been cleaned, you shouldn’t have to exert much force to do this task. Actually, baking soda handles the majority of the work for you.
Please note that you shouldn’t rub baking soda on the headlight paint. only made contact with the headlights. Baking soda may degrade your paint or produce swirl patterns. You can perform this action a number of times in order to achieve your desired outcomes. After that is finished, it’s time to give your headlights one last rinse to get rid of the white paste. Additionally, you can give them one last wash with your soapy sponge before drying them off.
In This Article...
Sanding and Cleaning the Lens
Cleaning the lens with soapy water or glass cleaner is the first step in restoring headlights. Then use a lot of tape to completely seal off the area around the headlight. Next, moisten the lens, take the #1 sanding disc out of the kit, and begin evenly sanding the glass.
After that, go to the #2 sanding disc and go over the headlight lens a couple more times. Ensure that the sanding marks are uniformly distributed and that you are sanding with the disc and the lens face-to-face. neither dry nor heated places.
After using all of the sanding discs, switch to the gray pad that is a little thicker. Your headlights will start to clear up thanks to this genuine wet-sanding pad. Although it’s not the last step, you’re getting there. After a few passes with the gray pad, completely clean the lens.
If the headlights on your BMW need to be updated, I’ve produced a step-by-step tutorial to help you do it. I’ve tried every kit out there and done this numerous times with wonderful success. This is without a doubt the approach that endures the longest. I just wanted to share!
Really? That will stop it from oxidizing once more for at least three years? That is wonderful to know!
Since it has a urethane foundation and is a very potent chemical emulsifier, it offers UV protection from haze or future yellowing.
Once the headlights have been wet-sanded and polished, it is a one-time application. No need for reapplication
Apply XPel paint protection film to the headlights once Wipe New has dried for even more security, and they’ll probably continue to look brand-new for as long as you keep the car.
A similar restoration that I completed with XPEL was done more than three years ago. They appear to be brand-new. The lights will deteriorate once more within months if you don’t safeguard them after sanding the UV protection off of them.
Procedure
- Place the BMW in a level parking space, ideally outside.
- Cover the body panels around the headlamp with masking tape.
- The drill’s pad holder should be attached before the 500 grit sanding disk.
- Turn on the drill, then lay it flat on the headlight lens. The headlight doesn’t require a lot of pressure to be applied. To clear the haze, slowly pass the drill over the BMW headlight. Repeatedly go over the hazy BMW headlight covers and lenses. The BMW might now appear even more misty and foggy. Periodically check the BMW headlamp and clean the dust off of it using a cloth. The headlight lens on your BMW should seem uniformly white. If you want your BMW headlight lens to look brand-new in the end, this step is really essential.
- Install the 800 grit disk after removing the 500 grit disk. To clear the haze from your BMW headlight, use the same steps as in the preceding step. Spend at least five minutes sanding the headlamp with 800 grit.
- Reuse the 800 grit disc after you’re done polishing it, but this time spray water on the headlamp. Your BMW headlamp should be cleaned for at least five minutes using an 800 grit disc and water.
- Install the 3000 or 1000 pads after removing the 800 grit disc. Wash the disc and the headlight lens with water. Spend no less than five minutes cleaning the headlamp. A whitish, milky residue ought should be visible. Once the white residue is gone, do this procedure several times more. As you go through this process, make sure to often mist the headlight with water.
- Mount the foam pad on the drill after removing the previous disc. The foam pad should be treated with a tiny amount of the rubbing compound. Rub the pad on the headlight several times without turning the drill on before doing so.
- Use the rubbing substance to polish your BMW’s lens. Reapplying the 3000 pads might be necessary if you still see any scratches.
- Clean the area surrounding the headlight after removing the tape.
- Enjoy your sparkling, brand-new BMW headlamp.
Window cleaner and car polish are used to clean the headlights.
Headlights that are cloudy can be cleaned with window cleaner or glass cleaner. To prepare the headlight surface for the application of car polish, use the window cleaner. As for preference, window cleaning agents without ammonia are equally effective as those that do.
- The portions around the headlights should be covered using masking tape. During cleaning, this will safeguard the trim, paint, and plastic components.
- Give the headlamp a good coating of window cleaner and give it a few seconds to absorb. Wipe the window cleaner from the headlight with a microfiber towel.
- Apply the polish with a different cloth and massage it vigorously in a circular motion over the headlight’s surface. To apply the wax fast and uniformly, you can also use a rotary vehicle buffer and polisher.
- Remove any extra polish by rinsing it off, then use a clean microfiber towel to dry the headlamp.
- To stop further clouding, treat your freshly cleaned and rebuilt headlight with vehicle wax.
What is the most effective DIY headlamp cleaning solution?
Applying a solution of baking soda and vinegar to cloudy headlights is another lifehack you can utilize. Both vinegar and baking soda have been used for cleaning for many years. Before you begin, clean the surface of your headlights with dish soap, then apply a solution of baking soda and vinegar. Apply a tiny dish of the vinegar and baking soda mixture in circular and side-to-side motions until your headlamp is spotless. Hazy headlights can also be cleaned with baking soda and a moist cloth.
What kind of cleaning agent is for domestic use?
5 tablespoons of baking soda should be added to a bowl along with enough warm water to make a paste. Apply the baking soda paste to your headlights with a corner of your sponge after you’ve given your headlights a basic cleaning. Utilizing a clean cloth and small circular strokes, polish your headlights. You can carry out this step as many times as necessary to achieve your desired outcomes. Your headlights will sparkle like new after being washed with dish soap and warm water.
How can you use vinegar to clean headlights that are foggy?
Your headlights may be fixed with liquid soap, baking soda, and vinegar in a few easy steps. Keep in mind that you might need to repeat the instructions several times to fully brighten severely yellowed, foggy lights.
Start by using a microfiber cloth to wipe away dust from the headlights. A bucket should contain one or two tablespoons of liquid soap. Add just enough water to make a watery solution out of the soap. Apply the soapy water to a different spot-free microfiber towel to clean the headlamp. Before using the baking soda and vinegar, the lens should be as clean as it can be. Spray some water over the headlights to remove the soap, then pat them dry using a cloth.
Make a thick paste by combining 1 to 2 tablespoons of baking soda with enough white vinegar. Polish the headlamp gently with the paste and a dry cleaning cloth. Repeat this process until the paste is completely removed from the lens and it is clean and clear.
Can the interior of a headlight be cleaned?
Has the outside portion of your vehicle’s lens been the lone area of DIY car headlight restoration? This could be the cause of your continued corroded headlight fogging up soon after restoration! One of the most crucial components of a car is its headlights for a variety of reasons. They serve as a car’s eyes and beauty. Driving at night would be impossible without these. Even so, even if every car has a headlight, how bright it is and how far it can go relies on how clear the headlights are.
An oxidized or cloudy-appearing headlight makes it difficult for a motorist to see the complete scene and the objects on the road. As a result, there may be significant safety risks for the driver, such as an accident or bent wheel from hitting a pothole or ditch. The original brightness of your beam is ensured by a headlight lens restorer, but only if you clean both the interior and exterior of your car’s headlights. Cleaning the interior of a car’s headlight can be somewhat difficult because the bulbs, lens, and reflector are enclosed in a sealed housing.
There is a catch, though, because these sealed lamps are more expensive and less robust. You must replace the entire headlight on that part if a headlight bulb breaks or burns out. So, how do you clean a sealed headlight inside and out? Identifying the type of headlights on your car is the first step.
How do I get the fog out of my headlights?
The majority of auto supply shops have one or two products that are especially made for cleaning headlight lenses after they have become fogged up from UV exposure. Look for anything labeled “aheadlight lens restoration” or “aheadlight restoration kita.” a These items make it simple to clear the cloudy headlights on your car.
People who urgently want the cleaning of cloudy headlights have a few alternative solutions that work just as well. Headlights may be cleaned well using toothpaste and baking soda. Both treatments are sufficiently abrasive to remove the fog without damaging or scratching the headlights. It’s possible that polishing agents like Rain-X will work well to repair UV damage. In general, it’s a good idea to keep cleaning supplies in your house or garage!
Headlights can Magic Eraser be cleaned?
Cleaning hazy headlights using a Magic Eraser is totally safe, even though using it on a car’s paint has become somewhat of a cautionary tale. a perk? The cleaning tool even removes the obnoxious yellow coloring that over time accumulates. Use a damp Magic Eraser to buff each one, and when they dry, wipe with a paper towel.
Headlights can toothpaste clean them?
You can attempt to clear the headlights if they are only slightly cloudy by using an abrasive, such as toothpaste, and vigorous scrubbing. Start by using soap and water or Windex to clean the headlights. After that, apply toothpaste to the wet headlight using a soft cloth and a fingertip’s worth of pressure. (Baking soda toothpaste works best.) Begin cleaning. Maintain a moist surface and add extra toothpaste as necessary. Apply a sealant once you’ve taken off the protective covering.
Do baking soda and lemons clean headlights?
I should point out that adopting this strategy could lead to different results for you. It’s more likely owing to the fact that certain cars’ headlights are far worse than others, not because the lemon and baking soda solution doesn’t work. Remember that years of UV exposure cause the acrylic headlight lens to yellow and become cloudy, therefore some headlights may need to be wet sanded and clear coated to be repaired.
This quick repair is NOT a permanent solution and works best on headlights that are just mildly to moderately cloudy. Your car’s headlights will gradually become foggy again after being cleaned. However, if you do this once a month, you might be able to stop it.
Although there are other options, such as using toothpaste or consulting a professional, that can clear out foggy headlights, the baking soda and lemon approach also works well. At your own peril, try it.