How To Check BMW 1 Series Oil Level?

I decided to put together some images showing how to utilize the electronic dipstick, often known as the board computer, to monitor your oil level. IDrive is not a feature in my automobile. The oil level may be checked quite easily.

To access this menu setting, press the button on the turn signal stalk’s end.

You will notice this if the engine has not yet reached operating temperature. You may tell the engine still needs time to properly warm up by watching a clock with an oddly-handing that is moving.

When the oil level is at the top electronic dipstick point, the oil level gauge looks like this.

No, the new BMW does not feature a conventional dip stick. You could, however, open the oil filter cap (when the engine is still cold!) and check the oil’s color.

However, because our cars employ direct injection, the process of turning new oil black doesn’t take very long. As a result, the color won’t provide much information. However, you may use this to collect an oil sample.

Every six thousand miles (maximum) or every four months, I replace my oil. Those are my OCIs.

This thread is old, I know. I’m attempting to use the BC button and the up and down toggle. However, I can’t get it to operate till I drive for a while for some reason. Is this typical? I mean, there is nothing I can check.

How long must the automobile be running before you may choose from the selections. Oil, service, and so forth? Again, I apologize for bringing up an old thread, but I’m having trouble finding anything online.


Your BMW 1 Series no longer has the engine oil dipstick. You must access the car information menu while the motor is running and in neutral, then select check oil level. The oil level control software begins automatically at this moment (the car continues to accelerate somewhat), runs for about a minute, and then provides you with a response.

How to examine the engine oil

  • Locate the dipstick in the engine bay by opening the bonnet. Typically, the handle is yellow. Consult the owner’s manual for your BMW if you’re unsure.
  • Make sure there are no oil dribbles on the engine when you carefully remove the dipstick.
  • Utilize a paper towel to wipe the oil away.
  • Until the dipstick is completely seated, re-insert it into the tube.
  • Check the oil level once more by removing the dipstick; it ought to be situated halfway between the “high” and “low” markings. If you’re unsure, see your owner’s manual.
  • Put the dipstick back in its position after determining the oil level on the dipstick.
  • If the oil level is low, twist off the oil tank cap, pour in the necessary amount of oil, and then replace the cap.
  • Please read over the owner’s manual for your BMW in advance if you have any questions.

Traditional dipsticks have been replaced by BMW Low Oil Level Sensors.

Under the hood, BMW has removed the oil level dipstick and replaced it with an oil pan sensor (the shaded part in the figure). If the oil level inside the oil pan falls below the safe level, the sensor should sound an alarm. Not accountants who determine how long you may drive without changing or checking the oil in your automobile, but engineers who created the engines who computed this number. Another thing to keep in mind is that these electronic level meters do occasionally malfunction.

BMW wants you to think that your car’s engine oil only needs to be changed every 15,000 miles and that the transmission oil never needs to be changed. Does that strike you as reasonable?

Did you know that BMW claims that a quart of oil is consumed by each of their vehicles every 800-900 miles? This equation’s irrational component is the 15,000-mile oil change interval with certain models’ oil pans holding up to 7.5 quarts of oil.

If you used this formula, your oil pan would entirely run dry after 8,000 miles of driving. That is around half of the suggested oil change interval of 15,000 miles. Not to mention that the oil pump will be unable to refuel well before the fifth quart runs out. The end consequence is a defective engine that needs a significant and pricey service. You would require an oil pan with a capacity of roughly 20 quarts to address this issue. There are only 8 quarts in the typical BMW. That is a tragedy waiting to happen!

Keeping with the lifespan fluids described earlier, how long is the “lifetime”? According to manufacturers, “lifetime” is often defined as 8 to 10 years or 100,000 miles, whichever comes first. Be advised, nevertheless, that you shouldn’t adhere to the manufacturer’s maintenance schedule if you intend to retain your automobile for longer than five years. Autoscope advises having your oil changed every 7,500 miles with synthetic fluids and every 3,500 miles with petroleum-based fluids to prevent costly repairs.

How can I tell whether my BMW has enough oil?

  • Warning lamp for oil pressure. When your car detects its oil reserves have fallen below a safe level, this symbol will show up on the display.
  • Metal and burning oil smell. Your engine system is put under more strain when your oil levels are low, which leads to overheating.
  • Banging or knocking.
  • engine trouble

How does a BMW x1 check its oil?

How do I check my BMW X1’s oil? Because I’ve been hearing a strange sound when I start my car, I’m concerned that I have low oil. I need to add additional oil, my boyfriend told me, but neither of us know how to do that.

In less than two minutes, find out if your auto insurance is being overcharged.

Checking the oil on some BMW models is a little more challenging because they lack an oil dipstick. Fortunately, you can still readily check the oil level. Following these procedures will allow you to check the oil in a BMW X1 while sitting comfortably in the driver’s seat:

  • Your automobile should be running for around five minutes after you turn it on.
  • Scroll until you find the oil lamp icon using either of your steering wheel controls. Press the BC button at the tip of your turn signal stalk to select.
  • After that, the screen ought to display a clock icon. Before you can check your oil level, you must wait until the clock’s hands have stopped spinning.
  • The maximum reading indicates that your oil is full. You must apply more oil to your car if it reads +1 or any other number.

You can add oil yourself if you’re at ease doing so. If not, you can bring your BMW to a repair shop or service facility to get the oil topped off.

Spend a little additional time checking out the Jerry app when you are checking your oil. After you download Jerry, just answer a few questions that should take you around 45 seconds to finish, and you’ll get car insurance rates for coverage that’s comparable to your current plan right away. Customers of Jerry save $879 year on average.

What type of oil does the BMW 1 Series use?

The BMW 1 Series engines should only ever be filled with oil that has been certified by the manufacturer; for many engines, we recommend a 5W-30 Longlife engine oil that has the BMW Longlife-04 accreditation. No matter if you drive a more recent BMW 1 Series F20 or F52, or an older BMW 1 Series E87, all of them require an oil change as part of the yearly maintenance.

Here, we provide you with all the information you need to change the oil in your BMW 1-series and discuss the best oils for all models and construction years in addition to the numerous alternatives and costs (petrol and diesel).

earliest BMW E87 (2004-2013) The BMW 1-series E87 was made available as the company’s entry-level model from 2004 and 2011. The little car may be specified with five doors and rear-wheel drive. Later models included the 1-series three-door, coupe, and convertible. The 1.6-liter gasoline engine in the entry-level 116i model produced between 115 and 122 horsepower.

The 120i had a 2.0-liter engine with up to 170 horsepower, making it slightly more potent than the 118i. The 3.0 liter six-cylinder engine found in the top petrol versions 125i, 130i, and 135i as well as the extremely sporty M variant had a maximum output of 340 horsepower. The new 2.0 liter four-cylinder turbo diesel engine fitted to the diesel models 116d, 118d, 120d, and 123d was capable of producing up to 204 horsepower.

The replacement will take over in September 2019 and will replace the second generation of the 1 Series, which was available from 2011. The BMW 1 F20 is as usual offered with three and five doors, but starting in 2017, the F52 sedan was unveiled with a focus on the Chinese market.

Although it is front wheel drive and a member of the second generation of the 1 Series, the Type F52 is built on a distinct chassis. The 114i petrol engine, which has 102 horsepower, is followed by the 116i, 118i, 120i, and 125i. The M 135i and M 140i, which have six-cylinder petrol engines and up to 340 hp, are the first models of the M series to leave the assembly line. There is a turbocharger on every machine. The 114d turbo diesel has 95 horsepower, followed by the 116d, 118d, 120d, and the 125d with a whopping 224 horsepower.

When should I replace the oil on my BMW?

Even the owner’s manual for your BMW suggests getting your oil changed every 15,000 miles. Additionally, the instrument panel warning lights on the majority of BMW vehicles are programmed to alert the driver to replace their oil at this time.

How long does an oil check on a BMW take?

Can I check the oil level in my BMW 320i without using a dipstick? I purchased my car used, so I am unable to determine how much oil is left in it because the dipstick is quite discolored. How can I determine the oil level in my BMW?

There is still a way to check the oil level in your BMW 320i despite the fact that a stained dipstick can make the task more challenging. This is how:

  • Start your automobile and let it run for a while to get the engine warmed up. This could take anywhere from five to twenty minutes, depending on the outdoor temperature.
  • Locate the board computer (BC) button by looking to the lower left of your wheel. Push the inside of this button.
  • Scroll through the menu selections on the display screen using the stalk adjacent to the button until you reach check oil level.
  • Press the BC button once more to choose this option.
  • The small clock on the screen won’t stop ticking for about three minutes. It will take closer to five minutes if you’re driving.
  • The clock should stop once this time has passed, at which point your oil level should show up on the screen.
  • You must apply more oil to your car if your display reads +1 or any other figure. If not, you may check and keep an eye on your oil level using the information on the display!

Why not spend a little additional time using the Jerry app to discover more about your insurance options while you’re taking the time to learn more about your new car? Jerry is a certified insurance broker that can quickly and easily assist you locate the best prices on the coverage you require. You only need to download the app and respond to a few short questions to see an extensive list of quotations!