One of the most crucial things you can do to maintain a long engine life is to use good, clean oil in your engine, in this example a BMW 328i. This is the most popular beginner DIY because it requires little skill and little that can really go wrong, but it’s still difficult enough to feel satisfying when finished.
- Your favorite oil (You must have 7 quarts available if you have 6 cylinders.)
- Fuel Filter
- Waxes and rubber rings
- Funnel
- short extension sockets for the 35 mm and 17 mm sizes
- Draining pan
- Safety glasses and paper towels
Before draining the oil, make sure you have the right parts by checking online or in a service manual. Once you are certain that you are prepared to drain, I recommend driving the car for 20 to 25 minutes to get the oil to operating temperature. Keep in mind that oil heats up more slowly than coolant. Any particles will be able to drain together with the hot oil and will drain more easily.
When you go home, jack up the automobile and place it on jack stands. I like to set the car on all four wheels so that I can get under the car more easily. When the car is level, this also makes it easier to drain the oil pan completely. Once you are underneath, find the oil pan drain plug, slide your drain pan underneath it, and use a 17mm socket to remove the plug. Once it is freed, I rapidly remove the drain plug and pull it away from the oil pan using an extension as a spinner. You’re less likely to drop the oil plug into the drain pan and you’re less likely to get burned by the hot oil this way.
Step away from the vehicle and enter the hood. To get the oil fill top to drain more quickly, I first pull it off. The oil filter is located in a housing at the front of the engine, in front of the intake manifold, on the E36, like our 328i or even a BMW 325i. You will probably need the 35 mm socket to remove the housing; take care not to scratch the plastic or spill anything. Check the rubber o-ring and replace it while the housing is off. Also, swap out the old filter with a new one.
Note: Before installing a new filter, I advise thoroughly wiping the interior of the housing, especially the housing threads, with a quality paper towel.
It’s time to replace the drain plug, install a new washer, and tighten it when the automobile has completely drained its old oil. Grab a funnel and start adding oil; after adding around 5 quarts, check the dip stick; then add the last quart and check the stick once more. A quarter of the bottle should be poured into the seventh, then you should check the dipstick and stop when it reaches the second mark.
Ensure that everything is tidy, fastened, and sealed, then start the car and take it for another 15-20 minute drive before returning to check the oil level and add more if necessary. Avoid overfilling. Thank you for changing your own oil! Because I can perform the work myself and save money, I choose a somewhat more expensive oil. I’m not sure if it is actually better, but I like to think it is worthwhile.
In This Article...
When should my BMW 328i’s oil be changed?
How often should I change the oil in my BMW 328i? Generally speaking, synthetic oil needs to be changed every 7,500 to 10,000 miles. For conventional oil, BMW advises changing your BMW 328i’s oil and filter every 3,000 to 5,000 kilometers.
How much oil is required to replace the oil in a BMW 328i?
The oil capacity of a 2014 BMW 328ia is 5.3 quarts of 5W-30 completely synthetic oil. You should also replace the filter when changing the oil. A
The 2014 BMW 328i is a timeless, luxurious vehicle that successfully blends sporty performance and stylish styling. You must periodically change the oil if you want it to run at its best. You can quickly
What kind of oil should I use in my 2011 BMW 328I?
What kind of oil should I use in my 2011 BMW 328i? I’m unsure about what to get for my car and fear that I’ll make a mistake and buy the wrong stuff.
In less than two minutes, find out if your auto insurance is being overcharged.
5W-30 synthetic motor oil is required for the 2011 BMW 328i to operate correctly. Since this is a very common oil type, finding it at your neighborhood auto parts store should be simple.
Most auto parts store personnel are highly educated about different types of engine oil, so ask them if you’re having trouble locating the proper product or if you’re not sure you’ve located the right sort of oil. To ensure that you are obtaining the right product, feel free to ask any questions you may have. Using the incorrect type of oil can harm your car’s engine.
Why not look for a better auto insurance plan once you’ve chosen the perfect oil for your vehicle? Visit the Jerraay app to see a list of quotations for the coverage you require in a matter of minutes. The typical user saves more than $800 yearly.
Can I perform an oil change on my BMW myself?
For a BMW owner, performing an oil change themselves is a terrific endeavor. if you have the resources. Fortunately, if you have the oil filter cap wrench—which costs around $20 if you can’t borrow one from a friend—they are not difficult to complete.
After a few usage, the instruments typically pay for themselves. For $89.26 with free shipping, Turner Motorsports offers an oil change package that includes a BMW oil filter, 7 gallons of BMW synthetic oil, and a new drain plug. I’ve done a lot of articles and videos on oil changes because it’s a relaxing way to use your BMW.
How much oil does a BMW 328i consume in quarts?
How much oil do you actually need? The engine oil capacity of the 2008 BMW 328i is 5.3 quarts, or 5.02 liters. A
Keep in mind that some automotive maintenance lingo can be confusing and never confuse your engine’s displacement (3 liters for the 2008 328i) with its oil capacity (the amount of oil its oil tank needs to run). Incorrectly entering these numbers would result in you adding 2 liters of oil to your oil tank, which would seriously harm your engine.
How much oil does a BMW 328i from 2011 consume?
Prior to emptying and replenishing your BMW’s oil, you must first determine how much oil is truly required.
A
A 3.0-liter, 6-cylinder engine with a 6.9-quart total oil capacity powers the 328i. The word “oil displacement” may occasionally be used, and many drivers believe it to be synonymous with “oil capacity.” While capacity refers to the total quantity that it can carry as well as the amount you all need to add during each oil change, displacement refers to the amount of oil that the car’s cylinders actually take in. A
How can you turn a BMW’s oil light back on?
My uncle, a retired technician, recently changed the oil in my BMW. The maintenance light is still on, so I suppose he forgot to turn it off. How can I turn off the BMW’s oil-change light?
- Don’t start the engine after turning the ignition on. You should hit the start button instead of depressing the brake pedal if your car has a push-to-start system.
- The service menu will show if you continue to depress the trip reset or odometer button on the instrument cluster. The reset button is normally located to the left of the speedometer, and pressing it for around 10 seconds should bring up the service menu.
- To discover the oil change notice, use the reset button to scroll through the settings. Press the reset button after that.
- Depending on the model, you might have to scroll through the options using the controls on the turn signal lever until you come across a prompt asking you if you’d like to reset the warning. Then, to reset the turn signal, press the BC button at the lever’s end.
- When prompted, press and hold the reset or BC button until the display indicates that the device is resetting.
You can save money on automobile expenses by having friends or relatives work on your vehicle, but employing Jerry can help you save money on extra expenses like auto insurance. The typical user of Jerry saves $887 annually on auto insurance.
Don’t be afraid to alter insurance or payment plans because you’re concerned about the extra labor. Jerry takes care of all the paperwork and even assists with canceling your previous insurance! Additionally, you can text one of our agents using the app if you have any questions along the route. They’ll be there for you whenever you need them.
How frequently should I have my 2013 BMW 328i’s oil changed?
One of the easiest and most practical procedures for your car is an oil change. Generally speaking, synthetic oil needs to be changed every 7,500 to 10,000 miles. For conventional oil, BMW advises having your 2013 BMW 328i’s oil and filter replaced every 3,000-5,000 miles.
Which type of oil should you use in a BMW?
The majority of BMW engines ship from the factory with a 5W-30. Additionally, BMW advises an oil change every 15,000 miles.
Mobil Full Synthetic 5W-30 High Mileage, Mobil 1 SAE 0W-40, Valvoline SynPower SAE 5W-30, or Castrol Syntec European Formula SAE 0W-30 are the brands that BMW utilizes. Since 2015, BMW has advised using Shell/Pennzoil PurePlus Oils as its aftermarket oil.
There is a sizable aftermarket performance modifying community for BMWs. If you read the conversations on forums or Facebook groups, you’ll notice that owners of tuned BMWs frequently praise Liqui Moly 5w-40.
Take the climate into account In warmer climates, consumers frequently choose the 5W-40 oil kind. You should choose the 0W-40 oil type if you live somewhere with a cooler environment. In comparison to 5W-40, which takes a few minutes to warm up to the ideal lubricating temperature, 0W-40 lubricates the bearings better upon beginning.
What does a BMW oil change cost?
You might have been informed when you purchased your BMW that oil changes for that particular car type were more expensive than average. Owners of exotic or non-European vehicles can get by with oil and filter replacements costing around $40. However, according to Repair Pal, the typical price for a BMW 328i oil change is between $135 and $175. Some estimates put this figure higher, as high as $250.
Without factoring in taxes and fees, the anticipated cost of labor is between $45 and $65 and the estimated cost of parts is between $90 and $110. It’s crucial to keep in mind that the price of an oil change may vary depending on your region, your car’s make and model, and the sort of engine it has. According to BMW’s website, oil changes for 3 Series cars exclusively with 4-cylinder engines start at $89.95 and use premium synthetic BMW oil. Prices include labor, parts, and oil, however additional fees can be necessary.
You should receive a little more than simply an oil and filter change at the higher estimates mentioned above, such as a general tune-up/check-up, engine and emission testing, transmission tests, brake fluid top-offs, and tire rotations.
You should receive the first oil change for free if you purchased a new or certified BMW.
Beyond that, though, why pay the dealership’s exorbitant rates only to have the oil changed? While providing you with the same level of care and high-quality goods as the dealer, your neighborhood mechanic can complete the task for less money.