1. Grab the blade of the key while pushing the side button.
2. Using the key blade, take off the plastic cap.
The CR2032 battery that the BMW key uses can be found in the explanation of the video below!
3. Make use of a flat-blade screwdriver to remove the old battery and replace it with a fresh one.
4. Replace the key’s plastic cap.
5. Attach the key blade to the key fob once more.
Please share any ideas you may have for new tutorials in the comments area.
This movie is solely meant to be educational. We disclaim all liability and responsibility for any harm resulting from the information in this video. You should use this knowledge at your own risk. I’m grateful.
In This Article...
replacing the battery in your BMW key fob
Make sure your current remote key fob actually needs to be replaced before spending money on a new one. If it’s not working, the battery can just be dead.
You might be able to skip this step if your BMW has a key fob that you need to place in a slot on the steering column. Many of these key fobs include rechargeable batteries that are intended to be charged automatically while in use; as soon as the key fob is inserted into the ignition slot, the charging process begins.
However, if you have a more current fob, it is possible that the battery is a non-rechargeable CR 2450 and will need to be changed from time to time. Simply remove the rear panel of your fob and replace the coin cell battery to complete this easy DIY project.
A battery should last one to three years before needing to be replaced, depending on your car and usage.
How is the battery in a 2017 BMW key changed?
BMW Key Battery Replacement with Comfort Access You may access the port on the key fob after removing the valet key. To remove the key battery cover, use a flat screwdriver or the valet key. The battery can be seen after removal. Replace the dead battery with a fresh one by removing the old one.
Can you change the battery in your own BMW key?
The battery in your BMW key is a CR2032. The old BMW key fob battery should be carefully removed, and the new one should be gently inserted after that. You’ll quickly be back on Johns Creek roads after this.
A 2018 BMW’s battery location.
Under the upholstery that covers your trunk, the battery is often found on the right side of your car. Using your 10 mm socket wrench, detach the negative battery connector from the battery. Set the cable carefully so that it won’t come into contact with any metal or the other cable.
How much does a new BMW key battery cost?
I recently visited the business. The key fob wouldn’t work to lock or unlock my car when I tried. My BMW key fob’s battery has to be changed.
In less than two minutes, find out if your auto insurance is being overcharged.
Batteries for key fobs typically last three to four years. Your current BMW key fob might need to be replaced, depending on the model.
You should replace the battery in your smart key or Comfort Access BMW key fob by following these simple instructions:
- Get a CR2032 battery from a department or auto store. It will cost you around $2 to buy it.
- By depressing the tab on your key fob, you can take the valet key off.
- To pry open your battery cover, use the key or a flathead screwdriver.
- Replace the old battery with the new one after removing the old one.
- Restore the key to its housing and close your key fob.
You have a non-comfort access key fob if you are unable to open it because it has an indent in the side. You must take a long drive to recharge your key fob battery because it can only be done through the ignition of your automobile.
Once the battery has been successfully replaced or recharged, make sure to test it by locking and unlocking the doors several times. To find out how much you can save on your auto insurance before you leave again, take a moment to glance at the Jerry app.
The Jerry app, a registered broker that provides end-to-end support, compiles reasonable rates, assists you in switching plans, and even assists you in terminating your old policy.
What kind of battery is required for a BMW key fob?
A CR2032 battery is necessary for BMW key fob battery replacement for drivers who have BMW Comfort Access. To replace the battery in your BMW key fob, follow these steps: Press in the little tab on the side of your key fob and take out the metal valet key.
How can I reset my BMW now that the battery has been changed?
One of the vehicles with the most advanced intelligent operating system in the world is the BMV. Therefore, the first thing you must do after every hit or replacement of an object in the car is to restart the entire vehicle.
This setup enables the computer to anticipate your next replacement requirement and alert you to it. After changing the battery, resetting the BMW computer is a quick and easy process.
- First, turn on the controller again.
- Step 2: Press “Trip” to activate it and make it light.
- Step 3: Hold down the “trip” button while continuing to press and hold it until the “Reset” button shows up on the screen.
- Reset in Step 4
What occurs if the battery in your BMW key dies?
You won’t be able to use keyless entry or remote unlocking if your BMW has Comfort Access if the battery in your key fob has died. You can still enter and manually start your automobile, though.
Press and hold the key release button at the remote fob’s base while unlocking the door of your car, then slide out the internal key blade. This can be used in place of a standard key to unlock your car. You can locate a little hole on the bottom of the handle if the keyhole is hidden on your car door. Use the key blade to pry off the trim panel and expose the keyhole by inserting it into the hole.
Once you’re inside, put your remote key fob in the ignition slot or, if your car doesn’t have one, press it up against the steering column’s key markings. If your key fob dies, you will still be able to start your BMW using the start/stop button on the dashboard.
Do you need to reconfigure your BMW key fob after changing the battery?
A remote key fob needs to be associated with your vehicle particularly in order to be secure.
This stops people who drive the same make and model of automobile as you from using their remote to access your car. You’ll need to reconfigure the fob if changing the batteries has reset this connection or if it was somehow disrupted in order to get it to detect your car once more.
Where is the battery located in a 2019 BMW X3?
Figure 1 shows where the battery is situated in the BMW X3 models. It sits under the carpet trim on the right side of the luggage compartment (red arrow). Use a high-quality battery when you replace your current one.
How can I reset my key now that my battery is new?
The majority of people use their key fob to unlock their car doors and trunk. But what occurs if the battery runs out? You might believe that getting a new key fob requires visiting a dealership or a locksmith, but did you know that you can simply reset it yourself?
This is how:
Find the little button on your key fob first. This is typically found on the fob’s backside.
2. For around 15 seconds, press and hold the button.
3. Release the button after 15 seconds, and your key fob should be reset!
The owner’s manual for your car should always be consulted if you have any issues or inquiries.
Simply press and hold the reset button for a few seconds if your key fob has one. Remove the battery cover and press the tiny reset button on the circuit board if your key fob lacks a reset button.
What does a BMW with a depleted vehicle key battery mean?
People typically drive shorter distances more frequently and with more accessories in colder weather (10degC) (battery consumers). The battery can be heavily drained by heat, heated seats, heated steering wheels, the stereo, and spotlights, among other things. People will drive 5–10 minutes to the grocery store, stop the car, go shopping for 30 minutes, and then get back in the car to repeat the cycle. When stationary at a stop sign, some newer automobiles even have a feature called engine Start/Stop that is intended to save petrol. This feature turns off the engine but leaves the other consumers on. When they go home and turn off the car, it goes to sleep after a few minutes and when they turn it on again, the notice “increased battery discharge” pops up.
It can be challenging to maintain the battery’s charge when there are so many energy consumers, especially during cold weather.
It takes a lot of electricity to drive short distances while using all of these car accessories. As a result, the battery starts to deplete to the point where the engine computer detects that its current charge start is below the necessary minimum. The automobile might start the following time, but it might not have enough time to recover until it is driven for at least 45 to 60 minutes. Due to low voltage, this might result in a torrent of fault codes flooding the vehicle computer. The accessories will eventually start to turn off in order to conserve the battery for the following start and to give the alternator time to finish charging.
Can a BMW battery be replaced without reprogramming?
Let’s first focus on what BMW battery registration genuinely is before delving into the procedure. Battery registration, to put it simply, is the process of notifying your car that a brand-new battery has been installed. Importantly, it must be done every time you replace the battery in your BMW, model year 2002 or later.
The car adapts the amount of energy required to recharge to operate at peak levels as your battery ages and gradually loses its ability to charge. The battery needs more charging the older it is. By registering your battery, you can inform your engine control module (also referred to as DME — Digital Motor Electronics) that a new one has been installed. As a result, the vehicle will reset the old battery statistics and won’t attempt to overcharge the new battery under the assumption that the old one is still in place.
In addition to registering, you must also code your BMW computer. No matter how different or similar your new battery is from your previous one in terms of specifications, it will still be necessary each time you change it.
How long does it take to charge a BMW key battery?
The EWS ring antenna from KL R charges the battery inside the key head inductively using a coil antenna included into the key. Integrated electronic circuitry in the key regulates the charging process.
- The lifespan of a vehicle is the same as the service life of a radio-control key when operated normally.
- The battery will eventually run out if the FZV keys are not utilized (i.e., kept in a drawer) after about 1.5 years.
- Approximately 30 hours are needed to fully charge a drained battery.
- After a 30-minute charging period, the remote control can be used roughly 15 times (driving time).
A transponder chip houses the important information. The transponder chip is a wireless EEPROM that may be read and written. It is powered by the steering lock’s ring coil. When the key is in the ignition switch, power is delivered electromagnetically from KL R.
Data is transferred and the battery is charged using the power supply. The transponder chip has undergone new development, enabling this.
Every time a FZV key is pressed, as in prior systems, the battery charge level is also displayed. Three consecutive low power condition messages are received by the FZV electronics before the GM sets a fault signaling a low battery in a particular key. The bus system also notifies the LCM, and an instrument cluster matrix message is sent to the driver to warn him or her.
When five consecutive messages showing a charged battery status are received, the fault will be immediately removed if the battery is recharged (used to drive the automobile).