Although pre-programmed for your car, your key still needs to be activated in order to be used.
Hold your new key fob flat on the dim battery indicator next to the steering column to accomplish this. After then, keep pressing the start/stop button until the “no key” warning light goes out. To check that activation was successful, press the start/stop button once more.
If this doesn’t work, you might need to activate your new key while removing your old key fob from the signal range to avoid interference. To accomplish this, first unlock your BMW with the existing key before having someone carry the key a short distance away from your car. After that, you can push the start/stop button while holding your new key against the steering column.
In This Article...
Can I get a new BMW key?
If you still have one key, you must bring your car, one piece of personal identification, one form of address identification, and the V5C logbook to your selected BMW Center*. You will need to make arrangements for your automobile to be delivered to your preferred Center along with the necessary documentation if you have lost both keys and are unable to access the vehicle.
* A photocard driver’s license cannot be used for both address identification and personal identification.
To keep you safe, our Centers are required to adhere to these security precautions. Additionally, you’ll have to sign for your new key upon picking it up.
How can I set up my BMW key fob?
Steps for Programming a New BMW Key Fob After then, remove your key from the ignition. While keeping the unlock button depressed, press the BMW logo three times on your BMW key fob. After pressing the BMW logo three times, release the unlock button. Once the ignition is turned on, your new key should be associated with your BMW.
BMW keys—can they be reprogrammed?
Your BMW’s key fob and keyless entry system simplify and improve convenience. So it may be a real bummer when they malfunction or need to be reprogrammed. Fortunately, if you know what to do, which we do, setting the keyless entry system in your BMW key fob is simple.
Can a locksmith create a BMW key?
A recent news story claimed that 30% of car owners lose their keys every week. Even while it may occasionally be a little inconvenience, vehicle owners can avoid having their day ruined by it with a little advance forethought. Obtaining a backup key is the most effective approach to make this happen.
Every year, cars get more technologically advanced, and what was once just a basic metal key keeps evolving into a smart fob with a variety of features. You have three choices for getting a new or replacement key for your BMW:
- You can cooperate with your neighborhood BMW dealer.
- You can work with a neighborhood locksmith business that has the skills necessary to duplicate and program BMW keys and fobs.
- You can obtain a “blank” replacement key and fob online, then take it to your neighborhood dealer or locksmith to have it programmed and cut once it arrives.
You will need to have your own personal identifying information, such as the BMW’s VIN and the year and model, in order to use any of these choices. In addition, you’ll need to have identification from the government and documentation showing your identity as the car’s owner. It may seem obvious, but having the necessary information on hand will speed up the process of procuring a replacement key if you find yourself in need of one after locking yourself out. The situation might become less stressful as a result of this.
The dealership may require you to tow your car there so they may make your replacement key if you opt to use them in an emergency and need the replacement key right away. They can come to you if you choose a trained local locksmith, which will save you time, money, and stress.
Can I change the battery in my BMW key myself?
Although the battery in this key is not intended to be changed, it can be done by cutting the casing apart and soldering a new battery. You’ll need a VL2020 battery to swap out this BMW key battery. The manufacturer does not advise performing this operation.
Do you need to reconfigure your BMW key fob after changing the battery?
Our X1’s primary remote, which was only a year old, ceased operating. To restart, I have to hold it against the steering wheel.
The old battery only has 2.96 volts, which isn’t the best voltage, but I went ahead and switched it out for a brand-new 2032, and…
There are some hints that I might need to re-sync the key, but I can’t find any information specific to X1.
After changing batteries, it shouldn’t be necessary to resync, especially if the old battery had good voltage.
Get inside the car using a different key to sync. Keep the other key far from the vehicle. Place the key (main remote) against the steering column’s key marks (if no markings then place key against steering column where lock would have been). Keep your key in position when you press the car’s starter. Now that the ignition is turned on, the engine should start if it is on automatic and your foot is on the brake. If this doesn’t work, check to see if the battery is installed properly. If it still doesn’t function, the dealer should probably replace it free of charge (while it’s still under warranty).
You will likely need to reassign driver profile details through idrive if resync is successful.
Every time I unlock the car, one of my fobs displays a low voltage battery error; I’ve replaced the CR2030 cell batteries (3.3v), but the error still appears when using that fob. The second transponder, however, unlocks the car without displaying any errors.
After changing the battery, I encountered the same problem. To fix it, I carefully lifted the two spring metal connections that press against the battery’s underside.
I also verified that there was enough strain between the outer metal connections and the battery edge.
Additionally, it is advised that battery faces be completely clean and free of finger oil, dirt, and other contaminates. I’ve discovered that using fine grit paper to lightly roughen the faces and edge of the battery improves the connection.
It all comes down to the ohmic resistance between the battery face and key fob contacts, and making the battery “snug” will always assist reduce any such resistance.
I’m over this. I believe the cause was some old, stale batteries I had stashed away. purchased some good new Energisers. Varta products are reportedly very good. The problem is that it’s difficult to discern when batteries purchased online are bogus. I’ve even purchased Duracells from Amazon that turned out to be subpar lead acid imitations, ruining my LED flashlight.
The cost of a BMW key fob
The price of a 2020 Toyota Sienna fob was comparable. Dealers, however, gave prices as low as $150 to replace a key fob for a 2017 Honda Accord. A number of BMW retailers claimed that the additional security features built into the 2020 X5 key fob justifies the roughly $500 they spend to replace and program one.
How much does a new BMW key fob battery cost?
I recently visited the business. The key fob wouldn’t work to lock or unlock my car when I tried. My BMW key fob’s battery has to be changed.
In less than two minutes, find out if your auto insurance is being overcharged.
Batteries for key fobs typically last three to four years. Your current BMW key fob might need to be replaced, depending on the model.
You should replace the battery in your smart key or Comfort Access BMW key fob by following these simple instructions:
- Get a CR2032 battery from a department or auto store. It will cost you around $2 to buy it.
- By depressing the tab on your key fob, you can take the valet key off.
- To pry open your battery cover, use the key or a flathead screwdriver.
- Replace the old battery with the new one after removing the old one.
- Restore the key to its housing and close your key fob.
You have a non-comfort access key fob if you are unable to open it because it has an indent in the side. You must take a long drive to recharge your key fob battery because it can only be done through the ignition of your automobile.
Once the battery has been successfully replaced or recharged, make sure to test it by locking and unlocking the doors several times. To find out how much you can save on your auto insurance before you leave again, take a moment to glance at the Jerry app.
The Jerry app, a registered broker that provides end-to-end support, compiles reasonable rates, assists you in switching plans, and even assists you in terminating your old policy.
What occurs if the battery in your BMW key dies?
You won’t be able to use keyless entry or remote unlocking if your BMW has Comfort Access if the battery in your key fob has died. You can still enter and manually start your automobile, though.
Press and hold the key release button at the remote fob’s base while unlocking the door of your car, then slide out the internal key blade. This can be used in place of a standard key to unlock your car. You can locate a little hole on the bottom of the handle if the keyhole is hidden on your car door. Use the key blade to pry off the trim panel and expose the keyhole by inserting it into the hole.
Once you’re inside, put your remote key fob in the ignition slot or, if your car doesn’t have one, press it up against the steering column’s key markings. If your key fob dies, you will still be able to start your BMW using the start/stop button on the dashboard.
How is a replacement key fob programmed?
- STEP 1: Start the engine. All doors should be closed, and you should be seated in the driver’s seat with the key fob and the ignition key.
- Press the lock button in step two.
- Turn off the ignition in step three.
- STEP 4: Repeat Step 3 with more key fobs.
- STEP 5-Start the procedure over.
Can I change a key fob on my own?
You might be able to program a replacement yourself, depending on the make and type of your vehicle.
The steps for programming a key fob yourself can differ: Owner’s manuals from certain automakers include instructions. In many circumstances, information can be available online. The catch is that in order to complete the process quickly or at all, you might need two functional key fobs.
Therefore, it is wise to acquire and set up an extra remote before you require it. Additionally, it’s a wise move because most used-vehicle buyers, particularly auto dealers, would pay extra for a car that has at least two functional sets of keys or key fobs. Therefore, having a spare key will not only be useful when you need it, but it will also benefit you in the long run.
Can you program your own automobile keys?
There are a few manufacturers who will let you program a single key even if you don’t have a working key. Remember that you’ll still need to have the key cut to suit the ignition, which necessitates presenting the locksmith with evidence of ownership.
Nevertheless, it is far easier to do this than to program a second or third key:
- Turn the ignition to the on position after inserting the key. Just the electronics, leave the engine off.
- After 10 minutes and 30 seconds, switch off the light by turning the key.
- Restart the key, then wait another 10 minutes and 30 seconds before turning it off once more.
- Thirdly, repeat the procedure.
- To program the key, turn it back to the on position.
- In order to test your new key, start the engine.