If you own a BMW 328i and are having drivetrain issues, you can usually fix the issue for a reasonable price. Repairing a drivetrain issue on a BMW 328i is likely to cost between $2,068 and $2,108.
The projected cost of the parts is $1,913, while the cost of labor ranges from $155 to $195. Repairing a BMW drivetrain issue is generally less expensive than treating the drivetrain issue and any additional problems that may arise as a result of long-term drivetrain neglect.
Initial problem solving is usually less expensive than solving a problem after it has gotten out of hand. Therefore, it would be ideal to address a vehicle’s faulty drivetrain as soon as the issue is discovered.
In This Article...
Causes, reset, and cost of a BMW drivetrain malfunction
The sophisticated and intelligent system in a BMW will alert you to any issues. You can quickly determine what’s wrong by taking a quick glance at the dashboard, which includes any warnings for BMW Drivetrain Malfunction.
The following are the main reasons for BMW drivetrain issues:
- worn-out spark plugs
- failure of the ignition coil
- fuel pump failure
- harm to the catalytic converter
- leak of transmission fluid
- antiquated differential fluid
- CV joint problem
- gasoline of poor grade
- chain breaking in time
- fuel injector issue
One of the first steps to take when a BMW drivetrain malfunctions is to reset it. The engine may be restarted, the engine’s underside can be inspected for damage, and an OBD II scanner can be used to investigate the issue further.
When there is a drivetrain issue, take prompt action. Depending on the severity of the issue, a professional repair can cost between $2,068 and $2,108.
Continue reading for more information about BMW drivetrain dysfunction, including its causes and fixes. We’ll cover all the other information you need to know, as well as the cost of repairs.
Drivetrain issue with a BMW
A drivetrain malfunction mistake in your car does not occur frequently. A probable issue with the engine or transmission may result in the BMWDrivetrain malfunction.
The car enters safety mode to safeguard the driver, engine, and gearbox. This protects the engine from further harm by limiting its overall output. Such malfunctions are typically brought on by rapid/intense acceleration, elevation, or overtaking.
Your car might display a number of symptoms when experiencing such a problem, including violent shaking, a hard ride, the loss of power, etc. The malfunction of the BMW drivetrain, its causes, symptoms, and potential solutions will all be covered in this article.
Whom is this article for?
- BMW owners are experiencing drivetrain problems.
- people who are searching for a fix after running into this problem.
How much does a drivetrain repair cost?
While replacing a gasket or seal for a differential is often not particularly expensive, it can cost anywhere from $100 to $200. Depending on the size and manufacturer of the vehicle, major repairs like replacing a bearing or gear can cost between $1,000 and $3,000.
What is a BMW 1 Series drivetrain malfunction?
Over the past month, I drove the car a little too hard three separate occasions and received this warning each time. My automobile is only three years old, and already this is happening.
In reality, there was no power loss; the sports mode just stopped when this warning appeared. When I switch the ignition off, it goes away.
I gave the car a hard drive again just before writing this, and the problem was gone.
There must be some value in tolerance, however the error message is quite ambiguous. It doesn’t even specify whether the problem is with the gearbox, the engine, or possibly something else. I advise attaching a diagnostic tool to the vehicle and reading the problem messages to check for a more detailed hint.
If the automobile enables you to drive even though it just displays the “Drivetrain” warning, the auxiliary water pump is probably to blame.
As you mentioned, when it is broken, the sensors go berserk. You can see that your water temperature changes if you can access the hidden menu (jumping 20 degrees and goes down etc)
11518616992 is the part number if such is the case. The coolant and antifreeze should be refilled as well once the water pump has been changed.
According to my limited knowledge, the N13 engine’s turbine valves are a regular cause of this problem. According to reports, these turbine valves are frequently exhausted by DSC power seizures.
Hi! I appreciate your responses. You might have actually hit it. I took out and replaced the default blowoff valve on my FastBits DV+ since it was making a metallic noise (clicking sound). The first occurrence of this warning occurred a week later.
Okay, so I bought a garage $50 USD to connect their diagnostic gear and show this to me:
Hello everyone, I just bought a 2014 M135i that has 35000 miles on it and operates flawlessly when driven sensibly. It was marketed as having 420 horsepower with pops and bangs. The automobile comes up with a drive train issue when I put my foot down. It will begin malfunctioning occasionally when this message appears, but not always. When I connected my scanner, the following codes appeared: 102001, 11a002, and 123511.
Could this be a bad/cheap remap, or has anyone else experienced similar problems? According to my research, many people have similar problems and try changing parts without success.
Since purchasing my 2012 116i in July, this drivetrain issue has occurred three times. Every time I’ve experienced it, I’ve simply stopped and restarted the car, and it has always gone away and hasn’t returned. Although it seems strange, I haven’t given it much thought because it is inconsistent and it has been raining approximately two-thirds of the time. Could the rain possibly affect a sensor? Almost everything else about the automobile appears to be in order, with the exception of the absurdly high oil usage.
The BMW warranty covers the drivetrain, right?
Any material or workmanship flaws are covered by the New Vehicle Limited Guarantee for the duration of the warranty. Additionally, the Powertrain Warranty also covers issues with the engine, transmission, or drivetrain.
What does “drivetrain malfunction” on my BMW mean?
A probable issue with the engine or transmission may result in the BMW drivetrain problem. The car enters safety mode to safeguard the driver, engine, and gearbox. By reducing the engine’s overall output, this prevents additional damage.
What does the BMW X1’s drivetrain entail?
Your X1’s drivetrain is in charge of sending power from the engine to the wheels.
It’s one of your X1’s most intricate systems, and it consists of everything following the engine and transmission:
The total power of your 2021 BMW X1 is maintained while the drivetrain is tuned in.
Check and replace the differential fluid, and lubricate the gears and bearings in accordance with BMW instructions to help avoid issues.
What is a BMW X3 drivetrain malfunction?
My 2013 BMW X3 has been displaying a drivetrain failure notification ever since I recently went camping in it. Why does this matter?
In less than two minutes, find out if your auto insurance is being overcharged.
Your 2013 BMW X3 will show the drivetrain malfunction notification anytime there is a problem with the engine or transmission. It frequently occurs after heavy or quick acceleration or on steep hill. Other indications of a drivetrain issue include:
- the exhaust pipe on your car is smoking
- shaking when accelerating or driving
- rough idling or stalling a lot
- The transmission shifts into first gear
- difficulty starting your vehicle
Alternatively, your drivetrain failure light can suddenly appear. In either case, it’s crucial to respond to the warning as quickly as you can. Restarting your engine is the simplest technique to get rid of it. However, if it doesn’t fix anything, you might want to get a second opinion from a mechanic. Alternatively, you might use a scan tool to perfect a diagnostic reading on your automobile yourself.
Consider spending some time to discuss your auto insurance coverage with Jerry after you take care of your drivetrain.
Jerry, a certified broker and app, does all the legwork for you by calling your insurer, getting estimates, and assisting you in buying new insurance. Simply download the app, respond to a few questions, and compare personalized quotes from the top insurance companies in the country.
What does a drivetrain warranty cost?
Powertrain coverage typically includes drivetrain warranties. In our experience, a powertrain warranty for an older car costs between $100 and $200 a month.
We requested quotations for powertrain warranty plans for a 2012 Honda Civic with 88,000 kilometers from the top companies in the sector. These are the costs for the powertrain plans with $100 deductibles that we were given.
Prices will differ significantly based on:
- what kind of car you drive
- How old is your car?
- What’s the mileage on your odometer?
- The duration you select
- The deductible that you select
- where you are
What does a BMW drive chain do?
The right maintenance schedule needs to be followed in order to keep your BMW performing at its usual level. There are some aspects of your car that need greater maintenance as it gets older. The drive chain, commonly referred to as the timing chain, is one of such parts.
The drive chain is a piece of machinery constructed of chains that are connected one to another in a way akin to a bicycle chain. The drive chain is coupled to a set of gears and pulleys at the front of the motor. The drive chain’s function is to power various mechanical parts and keep the engine running smoothly. When the drive chain has the right quantity of oil, it can accomplish this successfully, which is why adequate maintenance is crucial. You may read more about the signs of a drive chain failure caused by low oil in the sections below.
How long is a warranty on a drivetrain?
It can get very expensive to replace a drivetrain entirely. Here are some estimated expenses for some of the most typical drivetrain issues. Actual costs will vary depending on the specific automotive issue you’re experiencing and the make, model, and year of your vehicle.
- $200 to $400 for each differential repair; $2,000 or more if differential housing work is necessary.
- Repair of a drive shaft: up to $2,000
- Replacement of the transfer case: up to $2,500
- Joints for CVs: from $260 to $1,180
Drivetrain warranties on new vehicles typically expire after five years or 60,000 miles, whichever comes first. The normal length of an extended drivetrain plan is five to seven years. The precise duration and coverage, though, varies per supplier.
Manufacturers will occasionally extend a model’s warranty if users notice recurrent problems. For instance, a reviewer in Texas said that “Nissan knows they have issues with this transmission; otherwise they would never have been forced to extend the warranty on Nissans from 2003 to 2010 for 10 years or 120,000 miles or on Nissans from 2012 to 2020 for 84 months or 84,000 miles.”
Drivetrain components are the only ones covered by drivetrain warranties; all other components are not. However, there isn’t an one definition for drivetrains, so be ready to contrast various coverages.
The specific components you should be concerned about will depend on the transmission and drivetrain configuration of your car. Normal classifications for transmissions include manual and automatic. Endurance claims that a typical drivetrain warranty will typically cover the following parts:
- Rear axle with hypoid bevel gear, final drive, flywheel, clutch, gearbox, propeller shaft, and differential are commonly covered parts of a manual transmission.
- Regardless of how your vehicle is configured, a drivetrain warranty should cover the components necessary for its operation. Front-wheel drive, rear-wheel drive, all-wheel drive, and four-wheel drive are all possible drivetrain types. Transaxles, for instance, are normally only found in front-wheel drive vehicles, and transfer cases are only typically found in four-wheel drive and all-wheel drive vehicles.
Drivetrain protection is available through organizations that offer extended auto warranties, such as Protect My Car and Endurance, after the manufacturer’s warranty has run out. Additional drivetrain warranties are occasionally offered by dealerships.
Yes, drivetrains are covered under new car warranties. For automobiles with up to 100,000 kilometers or more, extended coverage is available.