Because of their svelte design and potent performance, BMWs are among the most well-known luxury automobile consumer brands.
BMWs can be expensive to purchase due to a few strange peculiarities, though. The head gasket is one issue. The head gasket in your BMW is an essential part of the engine and should be replaced right away if it is damaged.
A replacement BMW head gasket will typically cost you around $3,200. Between $2,900 at the low end and $3,600 at the high end, is the usual price range. The precise cost will vary based on the particular BMW model you own, the age of your vehicle, and the mechanic’s location.
The price of replacing a BMW head gasket depends on a number of factors. As a result, we today created this thorough essay on the price to replace a BMW head gasket. We will talk about typical costs for different BMW models as well as the price of replacing head gaskets.
In This Article...
How Much Does a Replacement BMW Head Gasket Cost?
How much does a blown head gasket in a BMW cost to repair? It’s significant to note that the response will differ depending on a number of variables. This covers the make, model, and year of your BMW as well as the mechanic you select.
Consult your mechanic You won’t get the whole answer if you ask, “How much is a head gasket for a BMW?” While this will get you going, remember to account for labor expenditures as well. To request a quotation for a BMW head gasket replacement, call our staff right away!
Why do I need to replace the head gasket on my BMW 3 Series?
Your BMW 3 Series’s head gasket maintains a seal between the cylinder head and engine block, enabling the engine to develop the proper level of compression while also allowing coolant and oil to pass through to the engine’s top.
The health of your BMW 3 Series will suffer if the head gasket blows out or breaks, enabling coolant to enter the combustion chamber and mixing with the oil. This is especially true if you continue to drive.
Head gasket replacements typically cost between $1200 and $3000, depending on the extent of the damage and any repairs needed.
A noticeable coolant leak, low coolant levels, engine overheating, white smoke coming from the exhaust, bubbles in the coolant reservoir, and discolored oil are all indicators of a blown head gasket.
The best suggestion is to turn off your BMW 3 Series, avoid driving it, and schedule a head gasket inspection with a repair if you suspect a burst head gasket. Otherwise, you can harm the engine permanently.
How much does a head gasket replacement for a BMW 318i cost?
RepairSmith provides transparent pricing that is affordable. The typical price to replace the cylinder head gasket on a BMW 318i is $1388.
Is it pricey to repair a blown head gasket?
What is the price of replacing a blown head gasket? Repairing a head gasket can cost thousands of dollars, thus it is frequently quicker and more cost-effective to scrap the car than to pay to have it fixed. Although head gasket repairs often cost between $1,000 and $2,000, this is not because the parts are expensive.
Can you operate a BMW while the head gasket is blown?
Your head gasket has failed. Driving with a burst head gasket will surely result in other car problems. Before it’s too late, K-Seal can stop the issue in its tracks.
Technically, driving with a blown head gasket is possible, but we never recommend it. So why is it such a bad idea to drive with a burst head gasket?
How much does a head gasket replacement cost?
How Much Does a Head Gasket Replacement Cost? A head gasket repair typically costs between $1,624 and $1,979 on the national average. While the materials themselves range in price between $715 and $832, the associated labor charges are expected to be between $909 and $1147.
What is the price of a BMW gasket?
At a dealership, labor costs are typically between $500 and $1,000 for a simple gasket replacement. It should cost less than $150 if you handle it yourself.
How much does a BMW cylinder head replacement cost?
The Best in Auto Repair Parts cost between $8,774 and $8,925, while labor is predicted to cost between $2,900 and $3,658. Taxes and other fees are not included in this range, nor are your particular model year or geographic area taken into account. Additional fixes could be required.
Can I drive a long distance with a burst head gasket?
How long you can drive your automobile with a burst head gasket is difficult to say. Depending on the location of the fracture or tear and the symptoms the vehicle exhibits, the remaining driving time will vary. Within a day, some engines would no longer run at all. If you employ a temporary fix, you might be able to drive the automobile for a week or it might last for a few months.
How long does a BMW head gasket replacement take?
How long does a blown head gasket take to repair? Depending on how severe the failure was, replacing the gasket could require anywhere from six hours to a few days. One of the worst problems a car can experience is a blown head gasket, and repairing it correctly takes time.
How much does a BMW valve cover repair cost?
Estimate for replacing the valve cover gasket on a BMW 328i. The typical price to repair the valve cover gasket on a BMW 328i ranges from $581 to $713. Between $80 and $82 is the projected price for parts, while labor costs range between $501 and $632.
How much does a BMW coolant leak repair cost?
Coolant leak repairs can be very expensive. Fixing this is expensive because it is a laborious operation. The price of BMW coolant repairs varies depending on a number of factors, but it typically ranges from $750 to $1,000. Although the parts themselves are not very expensive, the labor required by mechanics means that they may charge more for this kind of repair. The type of damage and the specific fixes the mechanic needs to do determine the costs of these repairs. You can be given a few alternative solutions for resolving your BMW coolant leaks by them.
Every option has pros and cons, so you should consider them all carefully before selecting one. Prior to selecting a mechanic, you should always collect various bids. Every repair shop will impose a different fee. If it does, it’s critical to decide which solutions are best for you and your circumstances.
They will be able to assist you during the entire decision-making process because you are working with reputable automotive shops. Since this is a significant purchase, you want the greatest possible workout for the money you are spending, thus you want someone to assist you.
Is replacing the engine better than fixing the head gasket?
Even though excessive heat can cause bearing failure, coolant in the engine oil is typically to blame. You have had a substantial amount of coolant mix with your oil if, when you remove the engine’s dipstick, your oil resembles more of a chocolate milkshake. Your bearings will corrode and lose durability extremely rapidly if there is water in your oil. A new head gasket will stop the leak, but bearing damage has likely already occurred. If your head gasket leak is the root of this issue, it is nearly always best to replace the entire engine.
Consider using BlueDevil Head Gasket Sealer to stop the leak and keep your car on the road if you don’t have bearing damage and the expense of replacing your head gaskets doesn’t make sense given the worth of your automobile.
You may get BlueDevil Head Gasket Sealer from one of your neighborhood auto parts retailers, such as:
- AutoZone
- Advance Automotive
- Bentley Automobile Supply
- Auto Parts CarQuest
- NAPA Automotive
- O’Reilly Automotive
- Boys Pep
- Quick Track
- Specialists in bumper to bumper auto parts
- Distributor of S&E Quick Lube
- Automotive DYK
- Shops for Fisher Auto Parts
- Shop for Auto Plus Auto Parts
- Shops Hovis Auto & Truck Supply
- the Salvo Auto Parts
- Benefit Auto Stores
- Authentic Auto Parts retailers
- Shops for Bond Auto Parts
- Tidewater Fleet Provision
- Auto parts from bumper to bumper
- Auto Parts Any Part
- Cheap Auto Parts
Is changing a head gasket simple?
Even good engines can occasionally experience terrible things. When a head gasket fails, this may be the situation. The useful service life will vary depending on the design specifications and the appropriateness of the gasket material for the application. However, any application that has been in operation for a sufficient amount of time can need the head gasket replaced.
One of the more challenging engine repairs is replacing the head gasket. They necessitate extensive part removal, meticulous surface preparation and cleaning, and methodical replacement and reassembly of the engine parts. Although replacing a head gasket is rarely desirable, it occasionally becomes required.
What transpires if a head gasket blows?
The head gasket is crucial to the engine’s operation in your car, and a blown head gasket can seriously harm the engine and necessitate expensive repairs. A head gasket serves as a seal between the engine block and the piston cylinder head. An internal combustion engine powers the car. High compression pressure must be reached in order for combustion to take place inside the piston chamber. The head gasket keeps coolant and engine oil from combining in the combustion chamber and seals the combustion process. Engine malfunction and a large loss of engine power may result from a burst head gasket [source: Bumbeck]. Now let’s examine how to identify a burst head gasket.
- Watch the temperature gauge on your engine. If your automobile overheats all the time, a blown head gasket may be the cause.
- Verify the amount of engine coolant. Your car’s coolant may be seeping into the oil pan from the cooling system if it is continually losing coolant. When the head gasket blows, this occurs.
- Utilizing the oil dipstick, check the oil level in your car. If there is froth on the dipstick, a defective head gasket may have caused coolant to mix with the oil.
- Keep an eye out for water droplets and sweet-smelling white smoke emerging from the exhaust pipe. According to Cars Direct, this can indicate that the head gasket has been blown off.
Is replacing a head gasket a big job?
In order to replace the head gasket on the majority of cars, a sizable section of the engine must be removed. When the motor is reassembled, many of the removed parts, such as the cam shafts and timing gears, must be placed precisely where they were taken out. These factors combine to make replacing a head gasket challenging and time-consuming.
Head gasket replacement is a challenging task that ought to be left to qualified specialists. Even if you have a friend with extensive automotive knowledge, it’s a large job to entrust to a weekend mechanic since it typically requires specialized equipment and years of experience.
But there’s another query you ought to be posing:
Is there anything else I can do to get my car back on the road consistently and safely without shelling out a small fortune?
A series of solutions from BlueDevil is especially made to fix your blown or leaky head gasket quickly and effectively. The carefully formulated BlueDevil Head Gasket Sealer may stop any leak in a blown head gasket caused by wrapped or fractured heads or blocks.
For quick and effective repair of severe leaks, use BlueDevil 32 oz. Head Gasket Sealer. Your head gasket leak will be fixed using BlueDevil head gasket sealer. Get your automobile back on the road while saving hundreds or even thousands of dollars! You can purchase BlueDevil Head Gasket Sealer (Part #38386) online here or at ALL major Auto Part Retailers. Sealer for the head gasket.
For lesser leaks, use BlueDevil 16oz. An affordable do-it-yourself head gasket repair solution is BlueDevil Pour N Go Head Gasket Sealer. Pour N Go Head Gasket Sealer by BlueDevil (Part #00209) can be purchased online at this location or at MOST major auto part retailers.