The typical price to replace the starter on a BMW 328i ranges from $677 to $878. While parts are priced between $408 and $538, labor costs are predicted to range between $269 and $340.
In This Article...
SERPRESULT
Most BMW 328i starters cost between $100 and $350, with variations depending on brand and warranty.
Starting at $50 up to $350, rebuilding parts for a starter can be expensive.
What is the price of a new automobile starter?
I’m sorry to hear that your car is having problems. You should also account for labor charges, which might run from $150 to $1,000. A new starter may cost between $80 and $350.
The average vehicle’s replacement starter costs roughly $500. Your mechanic appears to be charging you the standard rate for this work. However, you should plan an additional $100 to $200 on top of that charge. The mechanic might find other issues, such as a crankshaft or ring gear trouble.
A starter includes the following parts, among others:
- either permanent magnets or electromagnetic field coils
- Switch fork
- Brushes
- Solenoid
- Commutator and armature
- gear for the starter
- bushes and bearings
Remember that you have to totally remove the starter from the engine area. This can result in a hefty labor charge.
The starter is more readily accessible in some cars, and removal takes less than an hour. Some cars are more complicated than others, such those where the starter is hidden beneath the intake manifold. These are substantially slower cars. The complexity of the repair, which is partly decided by your make, model, and year, will determine the final cost.
If you firmly believe that your repair bill was overpriced, you can always contest it.
How long does a BMW starter replacement take?
Short Answer: 2 to 4 hours. Due to the complexity of beginning motors, a starter replacement often takes between two and four hours on average.
How can I tell if the BMW starter is defective?
- #1: The Engine Won’t Start.
- #2: Loud, grinding, or whirring noise.
- #3: Occasional Trouble Starting the Car.
- #4: The Starter Continues After the Start.
- #5: Smoke.
- #6: The starter engages but the engine won’t turn over.
- Seven: Battery
How much should I spend on a starter replacement?
An entirely new starter might cost you $50 to $350, and work from a skilled mechanic could cost you $150 to $1,100. A poor starting motor replacement could cost anything from $200 to $1450.
These numbers, however, can be lower if you can spot problems with the car starting at an early stage. By purchasing a rebuilt starter rather than a new one, you could also save a lot of money.
Unless you can get a hold of a mobile mechanic who can come over instead, you might also have to pay to have your car towed if the starter on it breaks unexpectedly.
Let’s look at the variables that affect these pricing estimations now that you have a general idea of the average starter replacement cost.
Is it pricey to replace a car starter?
What is the Price of a Car Starter? Depending on the make, model, and whether you get a rebuilt or new starter, you should budget between $80 and $350 for a new auto starter. Of course, hiring someone to install it for you will cost more money.
Can a BMW be jump-started?
DO NOT let any roadside assistance agency install a new battery in your BMW, and DO NOT jump start the vehicle. It might cost more than any other battery or jump start you’ve ever purchased.
Can a damaged starter be used to start a car?
Your automobile may frequently not start because of a weak or drained battery. Giving the starter enough amps will enable it to operate normally, which will cause the engine to start.
You can either use a portable jump starter or the battery and jumper wires from another automobile to jump-start a vehicle.
What you should do next is as follows:
- Locate the automobile battery by lifting the hood of your vehicle. Consult the car’s handbook if you can’t find it. Don’t work on your automobile battery if it appears bloated or is dripping. Instead, give a mechanic a call because the battery could need to be changed.
- If the car battery appears to be in good condition, connect the positive terminal of your weak battery to the positive terminal of the backup battery or jump starter using the positive wire (red jumper cable).
- Connect the negative terminal of the charged battery to any exposed metal on the vehicle using the black jumper cable.
- Now start the engine and wait for the battery to charge for a few minutes.
Depending on the engine type, DOD, and battery condition, a dead battery may take between 5 and 20 minutes to start up.
Detach the jumper cables once you’ve successfully started your automobile with a jump. The (-ve) clamp comes first, followed by the (+ve). Ensure that none of these cables touch one another as well.
Note: A broken starter may be to blame if your battery is charged but your car still won’t start. The starter relay can thus be disregarded.
Can I change a starter on my own?
The majority of people believe that if their automobile won’t start, the battery is to blame. They attempt to boost it, but it still won’t turn on. Obviously, it’s a beginner or something little more severe. The alternator receives a charge from the battery of the car through the starter. The alternator’s charge makes it possible for the car to start. The car is dead if the starter is worn out since it won’t accept or send a charge. A repaired starter is just as effective as a new one and is less expensive than buying a new one, which is pretty pricey [source: Allen]. Save money by replacing the starter yourself if it is the true source of the issue. How to change an automobile starter is as follows:
- In order to disconnect the negative battery cable from the battery, turn off the ignition.
- From the starter, unplug the positive cable—the substantial cable that connects to the battery.
- Using a ratchet, unplug each of the bolts holding the starter to the block.
- Any additional mounting brackets keeping the starter in place should be removed.
- The starter’s bolts must all be removed. Bolts that are difficult to remove or extremely tight should not be forced. Instead, use oil or lubricant to aid in removing the bolt.
- Take the starter out of the vehicle.
- The new starter should be mounted on the block and fastened with bolts. Reconnect the battery cable to the starter before tightening the bolts.
How much time does it take to repair a car’s starter?
A mechanic will normally need between 2 and 4 hours to accomplish a starting motor replacement, depending on the type of car. The amount of time depends, in general, on how easily the mechanic can access your starter motor, with some makes and models in smaller automobiles offering a little more of a struggle. All of our Lube Mobile mechanics are properly qualified, seasoned professionals with a broad range of vehicle knowledge.
No matter where you are in Australia, one of our mechanics is nearby and ready to service your car. Whether you need a starter motor replacement or repair service, make an online reservation today to take advantage of a fully mobile mechanical service that will be delivered right to your door.
How long does a mechanic need to change a starter?
They just informed me that my starter needs to be replaced while I’m in the repair shop for some routine maintenance. How long does it take to replace a starter, please?
In less than two minutes, find out if your auto insurance is being overcharged.
Depending on where the starter is located in your engine, replacing one will take anywhere from two to four hours.
Some engines have starters that are easier to access than others. To get that starter, a mechanic might need to scrounge around and remove certain components. If that’s the case, a 4 hour time frame would likely be preferable to a 2 hour one.
Download the Jerry app to see if you’re overpaying for auto insurance while you’re waiting for the mechanic to complete. We warrant that replacing your starter will be much quicker!
Simply spend a minute to respond to a few questions, and Jerry will do the rest of the work for you. To find you the greatest offer, they all produce competitive estimates from leading insurance companies. When a customer shops with Jerry, they often save over $800!
Is it simple to fix a starter motor?
The starter motor is a reliable piece of equipment. Every time you get into your automobile, you’ll need to exert a significant amount of torque to turn the engine for the first time. It should go without saying that this electrical motor is heavy-duty because it needs to be to fulfill its function.
For a mechanic, replacing a starter motor is not the easiest task. There are frequently several obstacles to overcome in order to reach it. To make room for it, take it out, replace it, and put everything back together again can take a good couple of hours.
Why does a starter malfunction?
- Typical wear and tear as a result of being exposed to extreme temperatures.
- The flywheel’s teeth will wear down to the point where they no longer mesh effectively, preventing the flywheel from spinning. When you try to start the car, this is what makes the grinding or whirring noise. If you keep turning the key, this issue, which may start out minor with worn places, will swiftly and significantly worsen. Avoid rushing things since you might make them much worse.
- shoddy construction A ground for current is also provided by the bolts that secure the starter to the engine. The starter and flywheel may be harmed if they are loose. The engine might not turn if the flywheel and pinion gear did not mesh when they were installed.
Always make sure you don’t just have a dead battery, a damaged alternator, a blown fuse, or a bad ignition switch before changing a starter.
Do you know what makes a starter malfunction? For guidance on how to maintain starters and alternators, consult your mechanic.
It is challenging to pinpoint precisely which part can be the source of starting issues because issues with the starter, battery, or alternator can all present with the similar symptoms. It might be time for a new starter, alternator, or battery if your automobile is having trouble starting.
You might want to start by understanding what a starter is and how it works. What causes a starting to go bad can be answered by understanding the fundamentals of how a starter operates and which parts are most susceptible to malfunction. The flywheel is engaged by a starter, a small but powerful pinion gear that thrusts toward the engine and spins to start the pistons. The engine will start if you combine that with fuel, air, and a spark.
Is it the starter or the alternator?
No-starting and difficult starting, dimmer lights, and issues with sound system output are a few of the things to watch out for. If your car starts, but then stalls while you’re driving, your alternator is definitely broken and your battery isn’t getting charged. Your alternator bearings may be the cause of an engine squealing sound that gets worse while drains like the heating or sound system are on.
Another red flag is revving the engine after setting the AM radio to a low number on the dial with no music. Your alternator is probably failing if you hear a whine or if the sound becomes distorted when you press the gas pedal.
Look for issues with the starter or other engine components if the car won’t crank or start but the headlights are still on.
When your car’s check-engine or battery indicator lights come on, it may be a sign that the alternator is malfunctioning or that there is a problem with the vehicle’s charging system. If your car starts running after receiving a jump start, it may also be a sign that the alternator isn’t working properly. It’s crucial to see a specialist about this so they can provide an accurate diagnosis.