Registered
Read an interesting post about this. I want to know what happens if you disconnect the battery because I’m new to iDrive. or disable the iDrive’s control fuse?
I’m not sure, but you might not want to completely disconnect the batteries in a BMW without taking some precautions because I’ve heard that if the car loses all power, it might enter an anti-theft mode. I’m not sure because I don’t work on my autos.
Anyhow, that wasn’t the type of reset the OP was referring about.
When you lock the car and turn it off, iDrive completely shuts off for roughly 12 minutes. In most BMWs, you can restart the computer for the idrive system, navigation, etc. by holding down the volume button for 20 to 25 seconds constantly. The volume is only momentarily turned off when the volume button is pressed; the system is not restarted.
In This Article...
Why won’t my BMW’s navigation work?
Allow the iDrive to restart by holding down the power button for 20 seconds. Possibly fix it Allow the iDrive to restart by holding down the power button for 20 seconds. Perhaps repair it
What kind of GPS does BMW use?
The primary navigation system for BMW is called iDrive. A control wheel that resembles a volume knob is included. Similar to a joystick, it can also be moved forward, backward, and side to side. In the middle is a button that you can press to pick or confirm your choice.
How do I activate the GPS in my BMW?
- Start the BMW, go to the infotainment system’s main menu, and then go down to Settings.
- Select GPS tracking after one more scroll down the page.
- Make sure the checkbox next to GPS tracking is selected.
How can I get free map updates for my BMW navigation system?
Several times a year, changes to the maps are released. They are offered in the BMW Shop as a one- or two-year subscription. If you have a current subscription, you can use the BMW Update Manager to obtain the most recent refresh from the BMW Connected Drive portal and update your map data. You’ll need a 64GB FAT-32 formatted USB drive and the methods below to accomplish this.
- First, use the icon in the site top to connect into your My BMW Account. Go to “My Vehicles” by navigating.
- Choose the vehicle for which a map update is desired.
- Go to the “Map update” section. If a new map version is available, a notification will appear.
What is the time required for a BMW computer to reset?
Amazing detective work produced the solution! Unplugging the negative battery cable for 10 to 15 minutes will reset a BMW ECU. For most BMW models, this ought to be sufficient to reset the ECU.
How do I reset my idrive to its default settings?
To reset the car data on your BMW with Operating System 8, choose “Menu” > “System settings.” Please be aware that after being restored to factory settings in vehicles with a manufacturing date of 11/2020, the vehicle will be deleted from your BMW ID on the My BMW App and My BMW webpage.
How much does updating BMW software cost?
It costs nothing to update the software on your BMW through BMW ConnectedDrive. The iDrive software update from BimmerTech starts at $249.
There are three ways to update the software on your BMW iDrive:
- With the iDrive software upgrade from BimmerTech
- through the webpage for BMW ConnectedDrive
- by means of the BMW ConnectedDrive App
By 2022, BMW will have updated its software to version 21-07. The most recent BMW software updates will always appear on your BMW control panel and My BMW App if you wish to stay informed.
How long will it take me to drive my car before the computer is reset?
It depends on a few things how long you should drive after resetting the computer in order to pass an emission test. However, you’ll typically need to wait at least an hour for the car to cool down before retesting.
Additionally, remember that a drive cycle could be necessary for a proper computer reset. You can refer to your owner’s manual or a skilled mechanic for more detailed information. Finally, keep in mind that the service engine light or stored codes prevent you from passing emissions tests.
What does it imply when a BMW has a red exclamation point?
Exclamation Mark in a Circle: If this light appears on your dashboard, it may mean that either your hill assist feature isn’t functioning or that your brake fluid is low (red). Either one need a checkup to be fixed.
Can I get a technological upgrade for my BMW?
Nearly the entire BMW fleet—more than 30 BMW models—can now be upgraded remotely. Until the interim version has been downloaded and installed, vehicles with software older than version 20-07 cannot install the most recent version.
What iDrive version do I have?
The iDrive system’s navigation is a crucial component that makes getting from A to B simple. But since roads and sites of interest constantly change, it’s critical to maintain your BMW’s GPS maps updated if you want to get the most out of your iDrive.
Many of the most recent BMW models include over-the-air (OTA) map updates, which use the vehicle’s integrated SIM card to automatically download the most recent map data. The procedure in these automobiles is comparable to updating your smartphone to the most recent iOS or Android version; all you have to do is restart your car after your iDrive has downloaded the data.
For vehicles that do not allow OTA updates, a manual upgrade is necessary. Previously, updating BMW navigation maps required changing a DVD holding the map data. More newer vehicles include built-in hard drives that hold the data, allowing you to update your map by overwriting the hard drive’s contents. You can accomplish this with BMW by connecting a USB stick with the updated map data to the USB port in your vehicle.
It’s a good idea to determine which map version you need, which relies on your iDrive system, before purchasing a new BMW map. Use the settings menu when your iDrive navigation is open to navigate to “Navigation system version,” where you can see the region, version, and year of your current GPS data.
What does an exclamation point in a red circle indicate?
A proposal for tagging is a red circle with an exclamation mark (!). When you view a memory item from the Person Page, you can see it.
- The image belongs to a certain person, but you failed to mention who it was.
- The exclamation point is only visible to the submitter.
- There is no red circle with an exclamation point on the memory items in the Memories Gallery.
- When you place your mouse over the symbol, the phrase “This photo is not tagged” appears. Even when a tag reference displays in the right panel when you click the image to view or edit tags, the notice still remains.
- On the Person Page, click the remembrance. When the image is enlarged, a new message appears that reads, “Click the image to tag.”