To make the best coolant, they must be mixed. Either pre-mixed coolant mixes with water added, or full-strength antifreeze that must be diluted with distilled water before being introduced to the engine system, are available for purchase.
In This Article...
SilberVogel
As previously stated, distilled water must be used to dilute the BMW blue coolant. Don’t believe the person who answered the phone; believe the instructions on the product itself (and everyone else here).
4. Combine one part BMW Antifreeze with one part water for the optimum all-year protection and performance. Corrosion and freezing protection are provided by this 50/50 combination down to -34°F. The mixture can be raised to a ratio of 60% antifreeze/40% water during the winter in severely cold places, which gives freezing protection down to -62degF. Never go above a 60% antifreeze percentage.
The item is incompatible with your BMW!
Keep your cooling system operating at its peak performance by using BMW engine coolant (antifreeze). This 1-liter bottle works well for little top-offs of coolant that has been lost. For the best defense against boiling, freezing, corrosion, and lubrication, coolant is mixed with distilled water. For the optimum protection in street cars, mix distilled water with antifreeze 1:1. Reduce the amount of antifreeze in your coolant mixture if you want more cooling properties, but only in warm climates where freezing is not an issue. We advise monitoring the freezing point of the coolant mixture if you want to use antifreeze and water ratios other than 1:1.
Red Line Water Wetter can also be used with pre-ignition if high temperatures could lead to engine knocking.
- BMW # 82141467704, genuine German OEM antifreeze
- optimum cooling, freeze prevention, lubrication of the water pump, and corrosion resistance
Step 2: Never mix your coolant with tap water. Purchase distilled water.
The bacteria and other contaminants in tap water may not be bad for us to drink, but they can seriously destroy your car’s engine, coolant systems, and other components. A 50/50 mix is the ideal ratio to achieve when mixing water and coolant. In hotter regions of the world, this mixture can be somewhat aggressive, but it performs an excellent job of lubricating the water pump and safeguarding the engine of your BMW.
y p w
When utilizing a straight water and Purple Ice mixture without antifreeze, I once saw something from Royal Purple telling folks not to use pure water.
Not very relevant in the OP’s situation, however it is not unheard of for water that is not distilled to be suggested for the cooling system.
Deoinized water was once marketed by Prestone as being superior to distilled water for cooling systems. It appears that someone has discovered one and is attempting to sell it on eBay as a collector’s item:
The largest problem, according to what I’ve heard, is when people pour distilled water straight into the cooling system. Due to dissolved CO2, distilled water is almost “carbonic acid.” Even though the acid is really weak, there are tales that when it is poured into a radiator, the metal begins to precipitate out this dark rust. It must be well combined with the coolant, which has acid neutralizers, before use. Any amount of coolant should work, even a small amount.
I spoke about my test-kits. With water hardness and pH testing kits, I used to test both distilled and tap water. Despite consistently testing as acidic, distilled water was always rendered alkaline by neutralizing the acidity with a small amount of tap water. I also recall experimenting with things, such as evaluating softened tap water that had been through a Brita filter. I didn’t even need to add a reactive drop for the hardness to decrease to zero, and the pH value indicated that it was acidic.
Not all coolants need to be diluted with water.
Now that we are aware of the essential distinctions between engine coolant and antifreeze, this issue becomes lot easier to handle.
Some engine coolant will arrive from the store already blended and prepared for addition to your car. It is not necessary to add it to the water. Check the label’s directions if you are unsure whether you bought premixed engine coolant.
Consult your car’s owner manual to find out what kind of engine coolant it needs. Your car will typically have a label next to the filler neck indicating the ideal engine coolant color. Typically, they are green or orange.
Pure antifreeze does require mixing with equal proportions water to provide a suitable engine coolant. What kind of water do you all have? SWEET WATER
When combining antifreeze, please refer to the manufacturer’s instructions before putting the fluid in your car. Make sure to adhere to any safety instructions provided by the manufacturer. Keep in mind that drinking this material can cause mammal death as it is toxic.
Is special coolant required for BMW?
Antifreeze and coolant Any generic antifreeze won’t work since BMWs have unique coolant specifications (nitrite and phosphate free) to prevent build-up and corrosion of metal components.
What happens if I don’t combine the coolant and water?
3 is the requirement that water be incorporated into the antifreeze-coolant in order to maintain the suspension of the performance additives (silicates, phosphates, and nitrates). These significant additions have a tendency to settle absent water. If they do that, you will no longer have additional protection against corrosion.
Can I combine coolant and regular water?
If I use tap water instead of distilled water in my coolant, is that such a huge deal? What exactly is the difference?
transcription of a video
Okay, do you have a winter coolant and a summer coolant? No, actually. The car’s coolant, which is now referred to as coolant rather than anti-freeze, is used all year round. You consistently utilize the same thing. In the event of a leak, you might add a little amount of water to top it off in an emergency, provided the leak is fixed and the right mixture—50% distilled water, 50 percent coolant—is put back into the car as soon as you can.
Do I combine my coolant and water with standard tap water, the question arises? Use distilled water instead, or even better, deionized water. This is due to the presence of minerals in tap water that can distort deposits inside your engine’s cooling system channels and radiator. Additionally, they have the potential to cause overheating over time.
Which coolant is suitable for my BMW?
No matter what type of car you drive, whether it’s a BMW, Porsche, Mercedes Benz, Audi, Mini, or Volkswagen, your car circulates a solution of water and coolant to dissipate the heat generated within the engine and prevent it from completely melting down.
A Spectrum of Colors
Which coolant type is best for your BMW, Porsche, Mercedes Benz, Audi, or Volkswagen out of the many available options? The answer is the kind that was initially installed in your car. Your coolant may be green, pink, blue, yellow, or even clear depending on the manufacturer. All coolants are naturally transparent, and dye is used to give them color. It has no impact on the coolant’s chemical properties that each producer adds their own colour blend. Because the water in Europe is substantially harder than the water in the United States, European manufacturers prefer coolant that is phosphate-free.
Inorganic Acid Technology (IAT), Organic Acid Technology (OAT), and Hybrid Organic Acid Technology (HOAT) are the three most common coolant types available today. A HOAT coolant is used by your BMW, Porsche, Mercedes Benz, Audi, or Volkswagen.
In order to protect aluminum surfaces, silicate is added to OAT coolants to create HOAT coolants. The cylinder heads and radiators, as well as other parts of your BMW, Mercedes Benz, Porsche, Audi, and Volkswagen engine and cooling systems, are constructed of aluminum.
Silicate and phosphate corrosion inhibitors are not used in OAT coolants. These coolants are made to last for 150,000 miles and have a long service life. It should be mentioned, nevertheless, that German Auto Center and the majority of manufacturers advise cleansing or replacing the coolant every two years.
The metal (Iron) components of the engine and cooling system are protected by traditional coolants, which are IAT coolants and use silicate and phosphate corrosion inhibitors. IAT coolants shouldn’t be utilized because the majority of the iron components in your BMW, Mercedes Benz, Porsche, Mini, Audi, and Volkswagen have been replaced with aluminum and other lighter composites.
It’s crucial to keep in mind that modern German performance cars, whether you drive a Porsche, Mercedes Benz, Mini BMW, Volkswagen, or Audi, will last you for many miles and years if you maintain them properly. German Auto Center in Austin is the place to go for German auto repairs. We will be pleased to help you!
Is coolant necessary, or just water?
Although many people opt to just fill their radiators with water rather than coolant, this is not really a wise choice. Use water if necessary if you don’t have any other coolants on hand. A However, be careful to get some coolant and add it to your radiator as soon as you have a chance. A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A
A Using the right coolant and using water differ significantly. While water does aid in keeping your engine cool, coolant performs the same function far more effectively. First off, water boils at a lower temperature at a faster rate than coolant. If you run your engine on simply plain water throughout the winter, you run the danger of having your engine block crack. Additionally, engine coolant has been developed to prevent corroding of the engine’s components. It should go without saying that water does not have these characteristics.
Remember! Without coolant, the heat created by continuous internal combustion would quickly damage the engine. Due to the high temperatures inside the engine, water alone is not totally sufficient to keep the system cool. The water in the system would eventually completely evaporate. You can avert bigger, more expensive issues down the road by doing this.
Is the antifreeze in BMW pre-mixed?
BMW coolant is not pre-mixed when purchased. Simply purchase a gallon of coolant and a gallon of distilled water, then prepare the mixture as necessary. I would simply add a cup of distilled water if it only requires, say, a cup of coolant or water.
Why is the coolant in my BMW low?
You should take your automobile to the automotive service shop as soon as possible for an inspection and maintenance if your coolant is low because it could be an indication of a larger issue. Some of the causes of a possible coolant shortage in your car include the following:
- reservoir leak or overflow tank
- a radiator leak
- radiator hose leak
- water pump leak
- cracked or compromised radiator seal
- defective head gasket