Oil dipsticks have long been a standard component of cars. They are simple to use, effective, and provide a quick response to whether your engine needs oil.
However, some BMW owners have been perplexed to discover that their car lacks a physical dipstick, which has led to uncertainty.
Since 2006, there have been no new BMW models with dipsticks. Owners used the traditional dipstick so little that it was replaced with an electronic oil level indicator installed in the oil pan.
Despite this, the physical dipstick has made a comeback alongside the electronic system in contemporary 7 and 8 Series BMWs powered by V8 and V12 engines.
But why did BMW decide to do away with dipsticks, and how can you change it in a BMW without one?
In This Article...
Check the oil level and locate the oil dipstick on a BMW 328i.
BMW chose to do away with the oil dipstick for the 2011 BMW 328i. An electronic sensor can be used to check the oil level in your vehicle. Locate the stalk on the left side of the steering wheel after starting your car.
Until you locate the oil symbol, click your stalk. On the left side of the stalk, press the BC button toward you. After a little while, your oil level will appear on the screen.
Traditional dipsticks have been replaced by BMW Low Oil Level Sensors.
Under the hood, BMW has removed the oil level dipstick and replaced it with an oil pan sensor (the shaded part in the figure). If the oil level inside the oil pan falls below the safe level, the sensor should sound an alarm. Not accountants who determine how long you may drive without changing or checking the oil in your automobile, but engineers who created the engines who computed this number. Another thing to keep in mind is that these electronic level meters do occasionally malfunction.
BMW wants you to think that your car’s engine oil only needs to be changed every 15,000 miles and that the transmission oil never needs to be changed. Does that strike you as reasonable?
Did you know that BMW claims that a quart of oil is consumed by each of their vehicles every 800-900 miles? This equation’s irrational component is the 15,000-mile oil change interval with certain models’ oil pans holding up to 7.5 quarts of oil.
If you used this formula, your oil pan would entirely run dry after 8,000 miles of driving. That is around half of the suggested oil change interval of 15,000 miles. Not to mention that the oil pump will be unable to refuel well before the fifth quart runs out. The end consequence is a defective engine that needs a significant and pricey service. You would require an oil pan with a capacity of roughly 20 quarts to address this issue. There are only 8 quarts in the typical BMW. That is a tragedy waiting to happen!
Keeping with the lifespan fluids described earlier, how long is the “lifetime”? According to manufacturers, “lifetime” is often defined as 8 to 10 years or 100,000 miles, whichever comes first. Be advised, nevertheless, that you shouldn’t adhere to the manufacturer’s maintenance schedule if you intend to retain your automobile for longer than five years. Autoscope advises having your oil changed every 7,500 miles with synthetic fluids and every 3,500 miles with petroleum-based fluids to prevent costly repairs.
BMW stopped using dipsticks when?
The 4.4L V8 in the 2018 BMW M850 is the engine in dispute. This engine is a development of the BMW N63 engine, which was initially unveiled in 2008, two years after BMW stopped using oil dipsticks. When a reader wrote in to ask how he should check the oil in his 2006 330i, BMW created such a stir that even the Wall Street Journal ran a story on it. One of the earliest engines that BMW designed with a dip stick was the N52 engine beneath the hood.
I watched the video below, which illustrates how difficult it is to check your oil in a new BMW, while not owning one myself.
The car must apparently be turned on in order to use this improved technology, and doing so requires simple navigation through the cluster’s display. However, it may take the device 5 to 15 minutes to record your oil reading. Unacceptable and, in my opinion, not significantly better than the standard stick.
I’m fine with digital meters being used in addition to conventional dipsticks. But to completely remove the dipstick is just…fiddling.
It will be better for everyone if this report is true and BMW doesn’t surprise us by removing the dipstick from the production model.
What kind of oil can a 2011 BMW 328i use?
What kind of oil should I use in my 2011 BMW 328i? I’m unsure about what to get for my car and fear that I’ll make a mistake and buy the wrong stuff.
In less than two minutes, find out if your auto insurance is being overcharged.
5W-30 synthetic motor oil is required for the 2011 BMW 328i to operate correctly. Since this is a very common oil type, finding it at your neighborhood auto parts store should be simple.
Most auto parts store personnel are highly educated about different types of engine oil, so ask them if you’re having trouble locating the proper product or if you’re not sure you’ve located the right sort of oil. To ensure that you are obtaining the right product, feel free to ask any questions you may have. Using the incorrect type of oil can harm your car’s engine.
Why not look for a better auto insurance plan once you’ve chosen the perfect oil for your vehicle? Visit the Jerraay app to see a list of quotations for the coverage you require in a matter of minutes. The typical user saves more than $800 yearly.
What volume of fuel does a 2011 BMW 328i consume?
Prior to emptying and replenishing your BMW’s oil, you must first determine how much oil is truly required.
A
A 3.0-liter, 6-cylinder engine with a 6.9-quart total oil capacity powers the 328i. The word “oil displacement” may occasionally be used, and many drivers believe it to be synonymous with “oil capacity.” While capacity refers to the total quantity that it can carry as well as the amount you all need to add during each oil change, displacement refers to the amount of oil that the car’s cylinders actually take in. A
What automobiles lack an oil dipstick?
The oil dipstick has been removed from some Ford, Cadillac, Lincoln, Chevrolet, Chrysler, and Mazda models, among others, and Mercedes, BMW, Audi, and other manufacturers are following suit.
Which automobiles lack a transmission dipstick?
It’s possible that your vehicle lacks a dipstick for testing the gearbox fluid if it’s recent. This not only makes it challenging to check the fluid level and condition, but it also removes the dipstick tube or orifice, which is the typical method of adding fluid to an automatic transmission.
Acura, Audi, BMW, Cadillac (Catera), Chevrolet (Equinox), Chrysler (300), Ford, Mazda (Miata and MPV), Saturn, Toyota, and Volkswagen are among the automakers that offer certain of their models without dipstick automatic transmissions. The transmissions on these cars are all of European design at the moment, which serves as their commonality. The idea is growing, though, as the GM-built 6-speed automatic utilized in the newest BMW vehicles likewise does without a dipstick.
The transmission fluid must be checked at the transmission if the car lacks a dipstick. To check the fluid, the car must be lifted using four jack supports so that it is level. The side of the transmission case will have a fill plug. The drain plug that is found at the sump’s base is not this one. Cycle the transmission through the gears while keeping your foot on the brake to ensure that fluid is present in all of the internal channels. Next, take off the fill plug while the engine is still running. There should be a thin stream of liquid emerging. The liquid level is low if not.
There won’t be enough area for a funnel, so you’ll probably need a fluid transfer hand pump, like one made by Mityvac that costs approximately $25. Tighten the fill plug to the specified torque setting while the engine is still running after adding fluid until some starts to leak out.
When checking the fluid level or adding fluid, some manufacturers, like Audi and BMW, are even more strict about the recommended technique, mandating that the transmission fluid temperature be between 30 degrees C and 50 degrees C (86 degrees F to 122 degrees F). However, after draining, the Audi transmission needs to cool to room temperature before being replenished.
But things get much more complicated because some manufacturers, like Toyota and Volkswagen, demand that an unique scan equipment be used to permit accessing particular gearbox channels before testing fluid level on some models.
Make sure you are aware of the correct, factory-specified process before attempting to check the fluid level in a car without a dipstick. The manufacturer shop manual is still the greatest source of information, though you might be able to discover that technique online.
How frequently should your BMW 328i get its oil changed?
How often should I change the oil in my BMW 328i? Generally speaking, synthetic oil needs to be changed every 7,500 to 10,000 miles. For conventional oil, BMW advises changing your BMW 328i’s oil and filter every 3,000 to 5,000 kilometers.
What kind of oil is used in a BMW?
The majority of BMW engines ship from the factory with a 5W-30. Additionally, BMW advises an oil change every 15,000 miles.
Mobil Full Synthetic 5W-30 High Mileage, Mobil 1 SAE 0W-40, Valvoline SynPower SAE 5W-30, or Castrol Syntec European Formula SAE 0W-30 are the brands that BMW utilizes. Since 2015, BMW has advised using Shell/Pennzoil PurePlus Oils as its aftermarket oil.
There is a sizable aftermarket performance modifying community for BMWs. If you read the conversations on forums or Facebook groups, you’ll notice that owners of tuned BMWs frequently praise Liqui Moly 5w-40.
Take the climate into account In warmer climates, consumers frequently choose the 5W-40 oil kind. You should choose the 0W-40 oil type if you live somewhere with a cooler environment. In comparison to 5W-40, which takes a few minutes to warm up to the ideal lubricating temperature, 0W-40 lubricates the bearings better upon beginning.