I have a 20-piece set “I now have alloy wheels on my M3, but I want to keep them so I can use them on the next vehicle I buy. Do you know of a bolt that will convert a BMW wheel (HRE P40 20) to an another manufacturer’s wheel bolt pattern? I know that you can purchase bolts that do this “) to a C-class Mercedes? (C63)
This is not accomplished by the bolt. Because it is a thick spacer, it may simultaneously have the BMW and Mercedes bolt pattern drilled into it.
Thus, after installing the spacer on the vehicle, the wheel is then bolted straight into the spacer using 10 lugs or bolts altogether. I’m not sure if they have BMW to Mercedes adapters, but they would be useless given that they are typically 20 to 25 mm thick. The difference in offsets between your Mercedes and the extra spacer thickness will prevent the wheels from fitting.
With the use of an adaptor, 5-120 bolt pattern wheels can be mounted on 5-112 bolt pattern wheels.
These adapters are 20mm thick, though. The M3 typically has roughly 20+ offset, while the C63 typically has 40+ offset. Therefore, even if the bolt pattern issue was resolved, it would still be extremely difficult to mount the M3 wheels on the C63.
In This Article...
Do BMWs and Mercedes-Benzes share the same bolt patterns?
Not at all, no. BMWs typically have a 5X120 bolt pattern, whilst Mercedes-Benz typically has a 5X112 bolt pattern. Because the bolt patterns on these two high-end brands differ, their wheels cannot be interchanged directly.
Wheel spacers and wheel adapters can be needed to make the wheels fit, though. Whatever the case, you should take the offset of the Benz and BMW into consideration. The wheels won’t fit if the offset of one of the cars is disproportionately large or small.
Will Mercedes wheels fit Audis?
Offset for Mercedes is 37 mm, and for Audis it’s 45 mm (I believe). E-Class is 5×112 but has a bigger center bore than us. Their rims will sort of fit ours, but ours won’t fit theirs. An E-class has smaller-diameter bolt holes.
Can other vehicles be fitted with BMW wheels?
You could decide to upgrade the wheels on your cars at some point. However, you might not be aware of which wheels from other cars will fit your automobile.
Fortunately, any vehicle’s wheel can be used as a replacement. The original wheel should, however, have the same bolt pattern, wheel offset, and size as the replacement.
By looking at the sticker plate on your door, you may determine the appropriate size of the replacement. Measure the wheel or get guidance from an auto retailer for a suitable replacement.
By choosing the incorrect size wheel, you run the risk of harming your car’s suspension, wheels, and brakes. You could even need to stop at the petrol station more frequently for refills.
What size wheels do BMWs have?
Early 3 Series cars from the E21 through E36 generations came standard with a choice of 14-inch or 15-inch wheels, whereas later versions starting with the E46 generation increased the size to 16-inch and 17-inch wheels.
Since 2004, larger 20-inch wheels have also been available, depending on the model, while 18-inch wheels have once again become a regular factory-fit option.
Most owners will want to upgrade to even larger 20-inch, 21-inch, or 22-inch wheels depending on their unique requirements and taste, although 19-inch wheels are generally the chosen wheel size for “modern” BMW 3 Series cars from 2004 onwards.
Are rims from Mercedes interchangeable?
On longer excursions, I always prefer to have a proper spare wheel in the boot, but Mercedes wants close to PS300 for a single wheel, and I then have to buy a tire. The A, B, C, and E class have extremely identical 5 stud, 5 spoke wheels when looking at wheels on Ebay.
The short response is “not always.” Different MB models (and varying generations of the same model) have different offsets even if the stud pattern may be the same.
You can find what you need on their website. For instance, if I insert my automobile, it will inform me.
I had never seen the webpage before, but it’s incredibly helpful. The other day, when I was attempting to explain to my insurance company that I had switched from one OEM set of wheels and tyres to another, it might have saved me a lot of time and effort.
The person on the other end of the call had no idea what I was talking about when I said, “I’ve gone from the Avantgarde 17’s to the staggered 18’s installed to the Sport.”
Fits a BMW with 5×112?
As many of you are aware, BMW changed their bolt pattern (PCD) to 5×112 from 5×120 with the launch of their newest vehicles, including the G01 X3, G30/31 5 series, G32 6 GT, and G11/12 7 series, after about 40 years.
What automobiles have Mercedes’ bolt pattern?
What Vehicles Share Mercedes’ Bolt Pattern? The standard bolt pattern for Mercedes vehicles is 5 x 112. For luxury car brands like Audi, Volkswagen, Maybach, and Chrysler, this is a typical bolt pattern.
Which wheels work with my vehicle?
The two simplest methods are to look at your car’s sticker plate, which should be inside the driver-side door, or to search online for the precise make and model of your car’s characteristics. That should indicate the typical rim size.
Are rims a common item?
The answer is no, a universal wheel does not exist. What wheels can go on your car depends on a variety of things.
Width and Diameter The wheel’s diameter and width are two of the most important variables. Every car will have a variety of wheel diameter sizes that will snugly and properly fit, ranging in size from several inches. Typically, this happens as a result of automobiles having multiple sizes and wheel selections for each trim level. This gives the consumer the choice to select wheels based on their aesthetics and functionality.
Both the diameter and width of the wheel are expressed in inches. The rim width is the distance between the edges of one bead seat and the other bead seat, whereas the wheel diameter is the height of the wheel across the center.
Offset The offset of a wheel is the separation between its centerline and its mounting surface. It is expressed in millimeters and can either be positive or negative depending on how far the mounting surface is from the center line. When the mounting surface is in front of the wheel centerline, the offset is positive; when it is behind the wheel centerline, the offset is negative.
This is crucial since you have to stay inside your car’s specified offset range. The wheel may not provide enough space for the wheel hub and brakes to operate properly if the alteration is too radical. The turning radius of your car may be affected by an incorrectly offset wheel, and the wheel may rub against the wheel well.
The diameter of the circle that goes through the center of all the studs, wheel bolts, or wheel rim holes is known as the Pitch Circle Diameter (PCD). You won’t be able to put the wheels on your car without additional parts or a new wheel hub if the PCD of the wheel you want to buy does not match the PCD of your wheel hub.
Two Drilled Wheels Dual-drilled wheels are not universal, despite what some people may believe. Don’t be duped by salespeople or marketing; a ten-lug wheel won’t fit any car with five lugs. Dual drilled wheels are those with two PCDs or bolt patterns.
For instance, a dual-drilled wheel with the bolt patterns 5×115 and 5×120 will only fit on cars with those specific bolt patterns. Other bolt patterns will not accommodate these wheels.
Can 5×114-3 wheels on 5×120 wheels?
The fact that 5×120 to 5×114.3 wheel adapters can only fit on 5×120 vehicle hubs and convert 5×114.3 wheels is crucial to understand. To avoid wasting time or money, conduct some research before starting the project. Most of the time, you can quickly check the bolt pattern in your owner’s handbook or on Google by entering the model and year. However, there might be some exceptions, particularly if you don’t know the new wheels’ PCD.
It is best to measure the lug pattern size yourself, however. Choose one lug hole on a 5-lug wheel as your starting point, and then use a ruler to measure from the edge of that hole to the center of the hole next to it. The bolt pattern would be 5×4.5″ or 5×114.3 if the bolt pattern circle diameter is 4.5 inches (114.3mm). Of course, you can get help from your neighborhood auto shop.
What automobiles use a 5×114-3 bolt pattern?
Honda Civic or Mazda Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3 are the most popular vehicles with PCD 5×114,3.
What automobiles have a 5×120 bolt pattern?
- Acura MDX MDX NSX (2016-2022) RL RLX TL TLX ZDX
- BMW
- Alpina BMW
- BYD
- Bentley
- Buick
- Cadillac
- Chevrolet