On an Audi, Mercedes wheels can be installed. But can Mercedes be fitted with Audi wheels?
No, Audi wheels will not fit on a Mercedes-Benz because the Mercedes center bore is larger than the Audi center bore. You must thus take the wheels to a mechanic to have the center bore enlarged before mounting the Audi wheels on your Mercedes.
The center bore of an Audi is around 57.1, while that of a Mercedes is 66.5. The mechanic must thus bore the center of the wheel up to 66.5 in order to fit an Audi wheel onto a Mercedes. However, each of these vehicles have the identical 5X112 bold pattern. Thus, the center bore is the issue rather than the bolt design.
You might need to take into account additional elements, such as wheel size, tire size, and wheel offset, depending on your Mercedes and Audi models. You can determine whether the Audi tire with the bored-out center will fit your Mercedes using these criteria.
In This Article...
Can you put wheels from Audi on a Mercedes?
Offset for Mercedes is 37 mm, and for Audis it’s 45 mm (I believe). E-Class is 5×112 but has a bigger center bore than us. Their rims will sort of fit ours, but ours won’t fit theirs. An E-class has bolt holes with a lower diameter.
Volkswagen wheels fit Mercedes?
Hubrings will have to be run. VW has a center bore of 57.1 whereas Mercedes has 66.6. Additionally, 43mm extended ball seat bolts are required for optimal fitment with most Mercedes wheels, but not all.
Which bolt pattern is employed by Mercedes?
You’ll likely need to know your car’s lug pattern if you’re interested in replacing or upgrading the wheels on your Mercedes Benz. Lug patterns may appear complex at first glance, so let’s explain.
The lug holes where your rims attach to the hubs hold your wheels to your car. You’ll have a specific number of lug holes depending on your car; for Mercedes Benz, there are normally 5 of them organized in a pattern around your wheel. Your car’s lug pattern is determined by the number of holes and how far apart they are.
Lug patterns, sometimes referred to as bolt patterns, are represented by two numbers: one represents the quantity of lug holes, and the other the size of the hypothetical circle those holes make. You can analyze the spacing of the holes and determine what kind of wheels are best for your car by knowing the circumference of that circle.
The most typical bolt pattern for Mercedes-Benz wheels is 5×4.41 (sometimes spelled 5×112), which indicates that each wheel has five lug holes that are separated by a circle that is four-point-four inches in diameter.
BMW Wheels Fit Mercedes?
This is not accomplished by the bolt. Because it is a thick spacer, it may simultaneously have the BMW and Mercedes bolt pattern drilled into it.
Thus, after installing the spacer on the vehicle, the wheel is then bolted straight into the spacer using 10 lugs or bolts altogether. I’m not sure if they have BMW to Mercedes adapters, but they would be useless given that they are typically 20 to 25 mm thick. The difference in offsets between your Mercedes and the extra spacer thickness will prevent the wheels from fitting.
What vehicles employ the 5×112 bolt pattern?
The stud count (5×112) and bolt circle measurement (112), the notional circle determined by the studs’ centers, make up the 5×112 Bolt Pattern or Pitch Circle Diameter (PCD).
Vehicles from Aiways, Alfa Romeo, Audi, BMW, BMW Alpina, Bentley, and Borgward all have the 5×112 bolt pattern. The following is a complete list of car makes and models:
Which alternative automobile wheels will fit your car?
You should choose a replacement for your car with the utmost care because rims are crucial to vehicles. It would look out of place and interfere with your drive if you made the wrong choice.
Usually, you are able to swap your wheel for one from another car. The size (diameter and width), center bore, offset, and bolt pattern of the corresponding rims are some of the variables that affect this. Both sides ought to have similar characteristics overall.
Which vehicles are 5×120?
5×120 bolt pattern What vehicles have a bolt pattern of 5×120?
- Acura (7) MDX (2007-2013) MDX (2017-2022) NSX (2016-2022) RL (2005-2013) RLX (2013-2021) TL (2009-2014) TLX (2021-2022) ZDX (2009-2013)
- BMW (27)
- Alpina BMW (15)
- BYD (10)
- Bentley (3)
- Buick (10)
- Cadillac (10)
- Chevrolet (8)
How big are Audi wheels?
The precise model, trim level, and production year of the Audi in question will determine the proper size for your rims.
Audi rims typically have a diameter of 15, 16, 17, or 18, however they can be any size.
The exact rim size your Audi requires can be found in the owner’s manual if you know the year, model, and trim level of your car. Simply measure the rim if you don’t have your handbook with you. The size will depend on the diameter of your rims, which you can simply measure with a regular tape measure.
Hope that was helpful. Don’t forget to use Jerry to compare insurance rates for your Audi and get a significant financial savings. Jerry is the only top-rated insurance app for comparing insurance policies.
Join the millions of happy users who are saving an average of $800+ annually by downloading Jerry right away!
A BMW 5×112 would it fit?
The diameter of a circle traced from one bolt hole to the next and the quantity of bolt holes make up the bolt pattern. The PCD is another name for it (Pitch Circle Diameter). There are five lug bolts in a 120mm bolt circle on almost all BMWs. All G-chassis employ a 5×112 bolt pattern, which has the same number of lug bolts but is arranged in an 8mm tighter circle, starting with the G01 7-series chassis in 2009. Also using this specification are Audi, VW, and Mercedes. Our wheel experts inform us that the use of uniform bolt designs for German brands is a recent standardization among wheel and hub manufacturers.
The substantial hole in the center of the wheel is known as the Center Bore. This hole will fit snugly with a lip projecting from the hub and brake rotor when the wheel is mounted to the vehicle. Hub-centric fitting refers to how firmly BMW wheels are made to fit on this lip. The wheel will wobble and shake and may even fail catastrophically if it does not fit tightly against this lip.