Audi Pre Sense Rear can start taking preventive action when a rear-end collision is detected using radar sensors in the rear bumper. This technology assists, among other things, by pretensioning the front safety belts and automatically repositioning the seats of the occupants.
In This Article...
What is the basic and rear Audi pre sense?
With the addition of rear parking sensors, Audi Pre Sense Rear is essentially Pre Sense Basic. When the car is pulling up too close to something, the parking sensors alert the driver.
These sensors are combined by Audi with self-parking and autonomous braking systems in select vehicles. In this instance, the sensors track activity behind the automobile at any speed as it travels down the road.
Visual and audio alarms advise the driver of the danger if the sensors identify a potential collision with a vehicle coming from behind. Early Sense In accordance with what is now considered normal procedure, the rear tightens the seatbelts, shuts the windows, and flashes the danger lights quickly. If present, the memory seats can be adjusted to offer the occupants of the automobile the highest level of safety.
Why does Audi Pre Sense exist?
Audi pre sense systems use cameras and radar sensors to monitor potential hazards surrounding the car. When a collision is about to occur, they take the following actions because they are able to identify pedestrians, vehicles, and other possible hazards. To lessen the risk of injury, the front seat belts automatically tighten.
Will the car be stopped by Audi’s pre-sense?
At 52 mph, it can detect turning, stationary, and pedestrians, and it can alert drivers to impending crashes. At speeds under 25 mph, Audi Pre Sense City can also start emergency braking and even assist the car in coming to a complete stop.
Can the Audi pre sense be upgraded?
From the Audi A3 through the Audi A6, Pre-Sense is available. Audi Pre-Sense is standard on the majority of Audi vehicles, and it can be added as a technological update to those that don’t.
How is an Audi pre sense changed?
On the infotainment system, choose MENU > Car > Left Control > Driver Assistance > Audi Pre Sense. System – It is possible to turn on or off the pre sense features.
Why is the pre-sense light on in my Audi?
Audi Pre Sense is a predictive safety technology system that turns on when a probable collision is anticipated. If this light comes on, make sure the sensors are clean and unblocked by debris.
Is there automated braking in an Audi?
For the new A6 family, a wide range of driver aid and safety features are offered. The rest advice feature is part of the driver information system in the optional MMI radio plus. It analyzes driving behavior using a variety of sensors and alerts the driver if there is any sign that concentration is beginning to waver.
The secondary crash brake assist is yet another new standard function. The safety system is engaged to assist the driver if a collision sets it off. In order to lessen the likelihood of skidding and subsequent crashes during the accident, it can start the automated braking system.
Among the optional assistance systems, adaptive cruise control with stop & go functionality is the key player. To keep a safe distance from the car in front, it stops and accelerates. The distance and the control dynamics can be specified by the driver in four phases. The system analyzes data from two radar sensors, a video camera, the ultrasonic sensors, and other devices over the complete range of speeds, from stationary to 250 km/h (155.3 mph). Additionally, it has access to the navigation system’s route data.
There are numerous variations of the Audi pre sense safety system. Using the sensors of the ESC stability control system, Audi Pre Sense Basic intervenes when it detects an unstable driving scenario. In these circumstances, it makes sure that the front seatbelts are electrically tightened and that the side windows and sunroof are closed, leaving just a space.
Audi pre sense front is an enhanced version of the ACC stop & go. It aids in avoiding collisions with the car in front of you and lessening the effects of those crashes. The system employs a tiered warning concept to persuade the motorist to brake in hazardous situations. As long as the vehicle in front is moving, partial braking will be carried out automatically if the driver remains inactive.
The assistance package’s complete version of Audi Pre Sense Plus initiates full braking just before a collision. Even behind a stopped car, automated emergency braking with full power is carried out at speeds under 30 km/h (18.6 mph). This complete stopping often completely avoids accidents below 20 km/h (12.4 mph) and significantly slows the collision speed in any case.
When changing lanes at speeds more than 30 km/h, the Audi side assist lane change helper uses two radar sensors to keep an eye on the area up to about 70 meters (229.7 ft) behind the vehicle (18.6 mph). A warning LED in the housing of the corresponding external mirror illuminates if a car is in the blind area or is moving quickly toward it. The LED flashes repeatedly at a high frequency if the driver continues to use the turn signal. The Audi pre sense rear system, which also starts preventive protective actions, is connected to Audi side assist.
Audi active lane assist uses a camera to detect lane lines on the road at speeds up to 65 km/h (40.4 mph). The feature helps the driver steer back into the lane if the new Audi A6 approaches a lane marking without signaling by making a modest adjustment to the electromechanical steering system.
The MMI allows the driver to select whether or not the steering wheel should vibrate as well. Audi active lane assist helps to keep the car in the middle of the lane if the driver chooses an early intervention point. The system and Audi side assist collaborate well in the new A6. The steering system may then intervene to assist after the warning concerning a crucial lane change.
increased security thanks to the night vision helper A far-infrared camera at the front of the car is used by the night vision aid. It responds to the heat that objects emit. Its information is shown on the huge driver information system display in black and white pictures. While people and animals appear startlingly brilliant, the cooler surroundings appear black. The device can detect people and larger wild animals up to about 100 meters (328.1 ft) away and highlights them with yellow markings. It has a visual range of up to 300 meters (984.3 ft).
The computer has the ability to preemptively prefill the brake system if it notices a dangerous condition. A warning tone plays, and a red warning symbol is displayed on the screen of the driver information system and in the optional head-up display. The person can be selected and illuminated with three brief flashes of light if the new Audi A6 is fitted with the high-beam assistant or Matrix LED headlights (outside urban areas).
The camera-based speed limit display can recognize and graphically display speed limit signs, their supplemental signs, and signs lowering the speed restrictions. It makes use of video camera signals and compares them to the optional MMI navigation plus’ database.
There are several methods to help with parking, but the best one is the park assist system with surroundings display. By constructing an image of the Audi A6’s surroundings using twelve ultrasonic sensors, it can direct the vehicle into parallel and perpendicular parking spaces with the touch of a button. Drivers simply need to brake and accelerate. When leaving parallel parking spaces, the system also assumes control of the steering. Obstacles on the sides are indicated in the environment display as they are being driven by. The technology can be used in conjunction with a 360-degree camera or a reversing camera. The car’s four tiny wide-angle lenses are used to take pictures of the immediate area. The images from these cameras can be shown to the driver in a number of different views on the MMI panel.
The equipment, information, and costs mentioned in this paper apply to the German model line. Subject to modification without notification; omissions and errors exempted.
How can I tell if the cruise control on my Audi is adaptive?
Using the multifunction steering wheel, select Driver assistance view to see the adaptive cruise control display in the instrument cluster. To see the current setting for distance, tap the rocker switch. There are five options for distance. When the ignition is turned off, the most recent distance that was set will be saved.
Why do Audi beam rings exist?
When the door is open, Audi Beam LED Entry Lights replace the existing lights in the door and cast a brilliant LED beam onto the ground.
Your vehicle must already be equipped with entry lights.
If you want to be sure this is the right fitment, please email your registration number.
***
The logo projection and greater brightness distinguish the enter LED, which is a progression of the traditional entry lights.
What location does the Audi pre sense sensor have?
Audi Pre Sense Rear can start taking preventive action when a rear-end collision is detected using radar sensors in the rear bumper.
Can I disable Audi PreSense?
What restrictions apply? The driver can turn off Audi pre sense front. This mode is stored on the ignition key that was used at the time it was turned off, and it remains off for the user of that key until it is turned back on. It doesn’t automatically turn on at the start of a new journey.