The electronic ignition and engine management technology known as EPC is found in many current Volkswagen Group automobiles.
Audi, Porsche, and Volkswagen are the Volkswagen Group’s three most well-known brands in the American market. All of these brands’ vehicles are probably equipped with EPC. Originally intended to handle throttle and ignition operations, the EPC today has additional responsibilities like electronic stability control and cruise control.
The Electronic Control Unit (ECU) of your vehicle acts as the “brain” of the vehicle during normal driving conditions, allowing the engine, drivetrain, and other systems to function as intended. When something goes wrong, the EPC flashes a warning light on the dash. The EPC collaborates with the ECU to monitor functions.
The “check engine” light and other warning lights may also come on at the same time, depending on the fault. Both the electronic stability control and the cruise control may stop working on their own.
The EPC may switch on a “limp-home” mode to try to protect the engine from harm. This will drastically reduce power and give you the sense that the vehicle is about to stall. Frequently, the engine will keep running, allowing you to get in touch with an expert for an evaluation and repairs.
In This Article...
What does it signify when the Audi EPC light illuminates?
Audi Vehicles Have an EPC Light When your car loses electricity, an EPC light will normally come on. Your Audi’s computer may lower power output to ease the strain on the engine if it notices a fault with any of the throttle system’s parts.
How can I fix my Audi’s EPC light?
I’m here. The Electronic Power Control (EPC) light just alerts you to an issue with the drive by wire method. The throttle pedal position sensor maybe not communicating with the computer could be the problem (ECM). The steps listed below can be used to reset the sensor:
- the ignition switch to on
- Step the gas pedal gradually all the way down.
- Turn off the ignition switch while keeping the gas foot pressed firmly on the ground.
- Switch on the ignition while keeping your foot firmly on the gas pedal.
- gradually release the gas pedal until it is in the rest position.
- Switch off the ignition.
You can start the car after that to see whether the light turns off and the sensor will be reset. I advise changing the throttle pedal position sensor if the light is still on. If you require additional help with your EPC light, get in touch with a specialist, like one from Your Mechanic.
Driving when the EPC light is on is it safe?
If the EPC Dashboard Warning Light Is On, Can I Drive? Most of the time, driving is safe for a brief period of time after the EPC light illuminates. But because the issue could be serious, it is essential to send your car to the nearest VW service facility, like Lithia Volkswagen of Des Moines.
What does the EPC light in your automobile mean?
Modern Volkswagen cars have a dashboard warning light called EPC, which stands for Electric Power Control. If the light is illuminated, your Volkswagen’s throttle system or sensors are malfunctioning.
Is it expensive to fix an EPC light?
As the price of repairing an EPC light will vary based on what is causing it to turn on, there is no universal solution to this problem. You can anticipate some general repair charges, though.
The repair might cost between $750 and $1500 if the ABS is the issue causing the light to come on.
Repairing a damaged engine oil level sensor may cost between $80 and $200.
Depending on the type and year of your Audi, you may spend anywhere from $450 to as much as $1,450 on a new power steering pump.
Many different problematic parts might need to be changed to fix a traction control issue. This particular repair might cost as much as $6,500.
You should budget between $225 and $300 to have the cruise control system repaired if the Audi EPC light is on.
As you can see, a number of potential problems could result in the EPC light on in your Audi. The particular issue that led to the notification and the Audi you own will determine how much it will cost to fix.
It is always advisable to send your car to a trained mechanic for an accurate diagnostic and a repair cost estimate.
Does low oil lead to EPC?
A good query! Although low oil might have an impact on engine systems, the Electronic Power Control (EPC) checks the throttle system.
The EPC light indicates that your throttle system is malfunctioning. Potential issue elements include:
- engine body
- throttle pedal
- Control of traction
- cruising mode
But because engine oil is essential to a functioning engine and lubricated parts, it’s probable that the problem that set off the EPC light was brought on by insufficient oil. The oil change light can be on. That might aid in identifying the problem.
In either case, it sounds like you should take your automobile to the shop to be serviced.
You might as well spend a few minutes lowering your auto insurance bill while you’re at the repair. To out how much you can save on your insurance coverage, download insurance broker Jerry.
Why does my Audi constantly indicate low oil?
Many drivers are unaware of how their vehicle’s oil circuit actually works. Your car’s oil light turning on indicates low oil pressure. This is bad, therefore you should stop driving right away, turn the engine off, and take your car to a qualified repair if the oil light comes on while you’re on the road.
Low oil pressure indicates either insufficient oil circulation in the system or insufficient oil pump circulation of the oil. Your engine needs oil to run smoothly and without friction, and if this isn’t happening as it should, your automobile could sustain serious, possibly irreparable damage.