Audi pre sense systems use cameras and radar sensors to monitor potential hazards surrounding the car. When a collision is about to occur, they take the following actions because they are able to identify pedestrians, vehicles, and other possible hazards. To lessen the risk of injury, the front seat belts automatically tighten.
In This Article...
Will the car be stopped by Audi’s pre-sense?
At 52 mph, it can detect turning, stationary, and pedestrians, and it can alert drivers to impending crashes. At speeds under 25 mph, Audi Pre Sense City can also start emergency braking and even assist the car in coming to a complete stop.
The meaning of the Audi pre sense fault
Pre-sense Fault Indicators for Audi Start with a car wash because either one could indicate a fault that has to be repaired or something as simple as a dirty sensor. The error won’t interfere with typical driving operations.
Pre sense: What does that mean?
Audi pre sense front alerts you if it determines you’re approaching an object too quickly and will give you a warning signal, followed by a warning jerk to further encourage you to engage the brakes. However, the car will start to stop on its own and brace for impact.
Audi Pre Sense Rear: What is it?
Audi Pre Sense Rear can start taking preventive action when a rear-end collision is detected using radar sensors in the rear bumper. This technology assists, among other things, by pretensioning the front safety belts and automatically repositioning the seats of the occupants.
Why is the pre-sense light on in my Audi?
Audi Pre Sense is a predictive safety technology system that turns on when a probable collision is anticipated. If this light comes on, make sure the sensors are clean and unblocked by debris.
My Audi pre sense has to be adjusted.
If you want to be thorough, you can try to reset the MMI by simultaneously moving the NAV and MEDIA toggles while pressing and holding the MMI ****’s center for for 3 seconds. Your MMI will restart and reset as a result.
Why is the pre sense on my Audi restricted?
If the ESC (traction control) is set to Sport or Off, or whether the MMI drive mode is in Offroad (I don’t have a Q3, so I’m not sure if it has this mode and how it acts), such settings can have an impact on pre-sense. However, following the initial message, you will continue to see a permanent warning icon, as shown below.
Is pre sense from Audi standard?
Pre Sense Basic, which is included as standard on the majority of Audi vehicles, is what you would consider the entry-level version of the Pre Sense technology.
Pre Sense Basic is a relatively low-tech device that employs sensors to alert the electronic stability control system when the driver slams on the brakes. Electric motors respond by pretensioning or tightening the front seatbelts in anticipation of a potential collision. Basic also closes the windows, switches on the danger lights, and raises the sunroof (if equipped).
Pre Sense in this form does not assist a motorist in avoiding an accident. Instead, it readies the cabin for impact to lessen the likelihood of a major accident.
The Audi pre sense sensors are absent.
The Audi pre sense 360 system detects accident risks all around the vehicle and starts particular safety procedures. The following driver assistance systems are included in it:
- Audi front pre sense
- Audi rear pre sense
- Basic Audi pre sense
- Pre-Sense Side for Audi
Audi pre sense basic
As soon as Audi pre sense basic detects a dangerous driving condition, it starts taking preventive safety actions for the passengers. It makes this determination using data from multiple vehicle systems. It steps in, for instance, if the Electronic Stabilization Control (ESC) sensors notice heavy braking or skidding. The driver’s seat belt and the front passenger’s seat belt are then automatically pretensioned to lessen any lateral or forward motion. Both the sliding sunroof and side windows close on their own. The hazard warning lights are also turned on to warn oncoming cars.
Audi pre sense front / Audi pre sense city
Depending on the car model, Audi pre sense front and Audi pre sense city use data from radar sensors and/or the front camera to calculate the likelihood of a collision. It issues warnings of potential collisions and initiates braking at predetermined vehicle speeds, within the constraints of the system. Vehicles are identified up to a speed of 250 km/h (155.3 mph), pedestrians up to a speed of 85 km/h (52.8 mph) or 65 km/h (40.4 mph), depending on the model, and cyclists up to a speed of 85 km/h (52.8 mph), depending on the system.
Based on a multistage warning concept, the system alerts the driver if an accident is about to happen via visual, aural, and tactile signals. If necessary, the system starts a complete brake application to prevent the accident or offers braking assistance to lower the vehicle’s speed. Inhabitants are also protected by measures. The seat is adjusted for maximum comfort, the seat belts are reversibly pretensioned, and the windows and optional panoramic glass sunroof are closed.
Audi pre sense rear
When a rear-end collision is imminent, the Audi pre sense rear system uses radar sensors in the rear bumper to start protective safety measures. These include power-assisted pretensioning of the front seat belts, as well as window and sunroof closure. The device also turns on the hazard warning lights to warn oncoming cars of the serious situation. The rear-end collision alert signal (RECAS), which causes the hazard warning lights to flash often, is activated throughout this operation. With the exception of when towing a trailer, Audi pre sense rear is active in the background throughout the whole driving speed range of the vehicle.
The value of Audi adaptive cruise control
Nevertheless, DeMuro warns that adaptive cruise control is completely useless on highways with little to no bumper-to-bumper traffic. Turning on adaptive cruise control becomes worse than not using it if your automobile doesn’t frequently need to come to a complete stop.
That is as a result of the safety safeguards that system designers incorporated. The safe traveling distance between your vehicle and the one you’re following is enormous because engineers wanted adaptive cruise control to be as secure as possible.
Because there is so much open space, DeMuro claims that at ordinary highway speeds, other drivers will simply cut in front of your automobile. As a result, driving frequently will just be faster and better overall while traveling at highway speeds, unless you absolutely want adaptive cruise control turned on.
What is covered by the bundle of driver assistance from Audi?
The Premium plus or Prestige trim levels of the A6 vehicles come with a Driver Assistance package. A top and corner view camera system, Audi pre sense plus, adaptive cruise control with stop and go, and Audi active lane assist are all included in the package. Audi side assist, Audi active lane assist, Audi pre sense plus, adaptive cruise control with stop & go, a top and corner view camera system, and power-folding, power-adjustable, auto-dimming, heated side mirrors with memory are all included in S6 vehicles with the Driver Assistance package.