There is currently no automatic map update for my Audi. What should I do?
In This Article...
Audi updates their software for a fee, right?
Audi e-tron owners can now go further on a single charge if they have a vehicle from the 2019 or 2020 model years.
Their vehicle’s range will increase by up to 20 additional kilometers thanks to a fresh software upgrade. This indicates that Audi is increasing the economy of existing vehicles as well, rather than just adding new ones to the lineup. The update is currently accessible, and Audi service facilities can install it.
Audi released a technological update with increased range for its first electric model series towards the end of 2019 in conjunction with the launch of the e-tron Sportback. As a result, the Audi e-tron 55 quattro of the current model year can go up to 441 kilometers on a single battery charge (WLTP cycle). Optimized software was the primary element causing the range to expand, along with updated hardware.
The software technologies that enable this efficiency improvement are now also accessible for vehicles that are already on the road. The update increases the high-voltage battery’s useable capacity among other things. As a result, the Audi e-tron 55 quattro’s 95 kWh battery produces greater net useful power. Therefore, 86 kWh capacity results in a longer range. Audi service partners are currently offering a free software upgrade for all Audi e-tron 55 quattro production vehicles produced between mid-September 2018 (model year 2019) and the end of November 2019 (model year 2020).
Where can I find myAudi MMI updates?
You’ll receive the download link along with your Audi MMI update after making your payment. Use a download manager to more easily download the files. Use 7zip to unpack the firmware, then copy all the contents to an SD card. It’s important to format the card with the FAT32 file system. Additionally, each update must be performed independently; do not put the firmware and map updates on the same SD card!
If you bought the software update on an SD card, you will need to wait for your order to arrive before you can start the update installation.
The installation of the Audi firmware is the next stage.
- Go to your MMI’s Engineering Menu.
- the SD card into slot 1, then select the “update choice,
- SD card slot: choose the source (SD1)
- pick the firmware, then “Typical on the next screen,
- It should take between 30 and 60 minutes to update the MMI.
Here’s a thorough tutorial for installing Audi firmware: a firmware update. Please get in touch with our support team if you experience any issues with the upgrade.
How can I upgrade the firmware on myAudi?
Put the SD card in slot 1 and access the Engineering Menu in your MMI by selecting the “Update” option. Select SD1 as the source, then choose the firmware and “Standard” on the following page. Depending on the file size, the MMI update should take between 30 and 60 minutes to complete.
Is the Audi nav system free?
At Roadshow, we don’t like having to continuously pay a subscription price for a car feature. We have already discussed it when BMS tried this technique, and surprise! We still don’t like the idea.
Audi said on Thursday that it would offer its MMI Navigation Plus service and its full-speed Wi-Fi option as either a yearly license or a monthly subscription cost for select 2021 Q5, Q5 Sportback, A4 and A5 cars. Clearly, Audi didn’t read our view on the whole notion. This action is a component of the brand-new program Function On Demand.
Audi’s (actually really amazing) satellite-view navigation costs a not insignificant $84.99 per month. Depending on your needs or preferences, you can buy a month here or a month there, but a full year of the service will cost you a staggering $849.99.
You should probably get the MMI Navigation Plus system when you purchase the vehicle because it is a $1,500 option on Premium Plus models and a standard feature on Prestige vehicles. Though not, hunt for a used car that already has it, or just use your phone for navigation, even if it looks less stylish, like we would.
Audi also offers a retroactive activation of the Light Function Package for a single $249.00 price for the duration of the vehicle, allowing E-Tron and E-Tron Sportback buyers to partake in the fun to a certain extent. Drivers who purchase this package will receive dynamic turning, maneuvering, and cornering lights.
In next months, Audi will introduce further Function On Demand subscription capabilities.
What is the most recent version of Audi MMI?
Audi’s cutting-edge MMI system, known as the MIB or Modular Infotainment Baukasten, is built on an entirely new architecture. The MIB MMI system, which was introduced in 2013 with the Audi A3, combines two distinct core modules into a single housing.
The basic Radio Car Control is the second main item, while the Multi-Media Extension Board, or MMX, is the first. The MMX handles voice control, phone calls, navigation, and all media-related tasks in conjunction with Nvidia’s Tegra processor. In the event that an upgrade is necessary, the MMX board can easily be switched.
As a result, the more recent MIB system has a slick user interface and is also more aesthetically beautiful. Audi is now now able to offer MIB navigation updates wirelessly. For the first three years following the vehicle’s production date, the map upgrades are likewise provided without charge.
Customers can download map updates from Audi’s website as many times as they’d like throughout the allotted time period as the vehicles are factory-activated.
There are now four versions of MIB: MIB 1, MIB 2, MIB 2 High, and the most recent MIB 3. The MIB 3 is reportedly much faster than the MIB 2, despite the MIB itself being a significant improvement over the traditional MMI system.
It will be able to interpret complicated words and expressions and perform advanced speech recognition.
It will be based on Linux and include Alexa from Amazon as your personal Audi AI. which in the end gives you access to smart IoT devices that are installed in your home.
A hybrid digital radio, Sirius XM with 360L, on-demand navigation, and a new myAudi app with real-time information access and a ton of useful functions are also included.
Except for the A1, A3, and Q2, all Audi cars will ship with the MIB 3 as standard equipment in 2021.
Other models included the Audi A1 (201819), A3, and A3 e-Tron (201517) in the MIB 1 whilst the MIB 2 includes the Audi A6, A7, A8, Q7, and e-Tron Quattro between 201921.
This fundamental overview covers every MMI model from Audi from 2002. However, how will you know which one you actually have?
What MMI model do I have?
The simplest method is to see what software version is currently loaded on the PC. To do this, hit the CAR button to access the vehicle’s menu, then press SETUP or MENU, choose “Version from the submenu, and then read the value from the line with the letters “SW.”
- SW: XX-XX XX.X.X XXXX MMI 2G
- BNav XX XXXXX, MMI 3G Low/Basic
- Highest MMI 3G: HNav XX XXXXX
- HN+ XX XXXXX or HN+R for MMI 3G+
- RMC XX XXXXX: MMI
- Mib1 for MMI: MHIG XX XXXX
- Mib2 for MMI: MHI2 XX XXXX
- MSTD: MSTD XX XXXX for MMI
This ought to assist you in selecting the correct firmware version for your vehicle. Any inquiries? Just inquire in the comments or get in touch with me through my contact page.
Where can I find Audi CarPlay?
Wireless Setup for Apple CarPlay Turn on your Audi, then put it in PARK. Press Bluetooth > Phone > Connect Mobile Device on your Audi’s touchscreen. Now the system will start looking for devices. Choose the device you want, then make sure the PINs on each of them match.
How do I update the virtual cockpit for myAudi?
e) Click “UPDATE,” then choose your SD card. f) Scroll to the bottom of the update selections once it loads the update from your SD card and hit Start. As the update is processing, follow the instructions on the screen until you see the screen below.
How can I insert my SD card for my Audi sat nav?
The steps listed below should be followed if you want to update the maps in your Audi:
- Invest in an Audi map upgrade. You’ll receive a download link following your purchase.
- Use 7zip to unpack the files.
- Copy the update files to an SD card that has been formatted in FAT32.
- Put the card in one of your MMI’s SD card slots.
Does every Audi have Audi Connect?
- All new Audi vehicles come with the optional feature known as Audi connect.
- The nation and model determine whether Audi Connect is available.
- Many automobiles have fitted the necessary SIM cards.
- Depending on the MMI version installed, certain Audi connect services may not be available.
- Certain services are subject to license terms and may be renewed after they expire.
- The services are packaged together.
How do I network with my vehicle?
Please get in touch with your Audi dealer to learn more about any country-specific requirements that could apply before using a particular Audi connect service since many of them do have them. You need to have the myAudi app installed and active on your smartphone in order to utilize these services. Using the myAudi App or online at, you may quickly create a myAudi account.
What functions and added value does Audi connect offer?
The following bundles include the Audi connect services:
Navigation and information system by Audi Audi connect combines features that elevate entertainment, information, and comfort in the Infotainment & Navigation package. Using comparisons with the most recent traffic statistics from the Internet, benefit from improved route guidance. Finding a parking spot is quicker and more pleasant thanks to the infrastructure’s closer networking, and the destination search is optimized so that nearby attractions are simple to find. Thanks to the read aloud feature for emails, online news, and Twitter messages, one may stay informed while driving.
Navigation & infotainment plus for Audi connect Innovative Audi connect services are a part of the Audi connect Navigation & Infotainment plus package, which is a supplement to the Audi connect Navigation & Infotainment package. Natural language interaction, for instance, can improve usability, and 3D optics can provide a wider view of your surroundings for improved orientation.
Remote control and emergency call included with Audi Connect The services of the Audi connect package assist emergency calls and services, including those that can be accessed remotely, in the event of an accident or breakdown. In an emergency, knowledgeable Audi technicians from the Damage or Breakdown Service will assist you, or the vehicle will automatically contact for aid. Your Audi partner is alerted in advance about scheduled maintenance appointments thanks to the online Audi service appointment system.
Audi connect services for e-tron All e-tron models are eligible for unique features from Audi Connect, such as controlling the vehicle status at a glance, including the charging state and driving information.
Why would you need an Audi SIM card?
Audi is now adding Audi connect SIM to its new cars that utilize the second-generation modular infotainment platform. The benefit of a factory-installed SIM card is that customers may use the extensive list of Audi connect services right away, even outside of Germany, with the data flat fee that comes with it for up to three years.
Customers in Europe who choose to purchase the optional Audi connect equipment package will also receive an embedded SIM, also known as an eSIM, which is the permanent Audi connect SIM card. As a result, the vehicle becomes a mobile communication hub. With a download speed of up to 100 MBit/s, the SIM card uses an LTE/UMTS module to deliver Audi connect services on board. Services include travel, traffic, and parking information, as well as navigation with Google Earth and Google Street View. Drivers can also access the calendar on their smartphone as well as their Twitter and email accounts. For using these services, the new SIM card comes with an unlimited data volume. Another benefit is that, in the majority of European nations, the Audi connect SIM automatically contacts the appropriate service provider when necessary. The customer no longer has to deal with exorbitant, regionally specialized roaming fees or onerous roaming confirmations.
For the Wi-Fi hotspot, customers can also purchase extra data packages that are not part of the integrated Audi connect services. This belongs to the extra navigational systems. All passengers are able to use up to eight mobile devices to browse the internet at affordable rates. While a consumer chooses a European data package, data transmission automatically occurs in accordance when crossing an international border and, consequently, when switching internet providers at set pricing.
Through their myAudi account, customers can access our partner Cubic Telecom’s online store. They can purchase the data bundle for the Wi-Fi hotspot from this store after registering just once. Data packages can be quickly and easily ordered through the MMI system in the car if the necessary access is granted at the online store. Additionally, customers can keep using their own SIM card in the automobile and set up Wi-Fi internet connection through their own cellular operator. In this scenario, the customer’s SIM card will also be charged for the data volume utilized by the Audi connect services, and the Audi connect SIM will be momentarily disconnected.
When a car is purchased, a new SIM card is provided, and when combined with MMI Navigation Plus, access to Audi connect services is free for three years (depending on the model). Use of MMI Navigation is free for three months, and for a price, it is available for three years. After that, consumers can request an extension of access from their Audi service provider for a charge.
All new cars with the second generation of the modular infotainment platform utilize the Audi connect SIM. Currently, these include the Audi A3, A4, new A5, Q2, and Q7. There will be other model series. At the moment, this new deal does not apply to the Audi TT, R8, A6, or A7.
The deal is the first outcome of a partnership between Audi and Cubic Telecom, a premier provider of seamless global connection solutions.