The front lights on Audi A3s equipped with all-weather lighting are automatically adjusted so that, for example, while you’re driving on a wet road, the headlights on your own Audi A3 won’t blind you.
When the Audi A3 is substantially loaded, the headlight range control on your vehicle will keep oncoming traffic from being blinded.
The headlight beam settings on Audi A3s equipped with xenon headlights* or LED headlights* are changed automatically (even during braking and acceleration).
The knob Fig. 1 must be used to change the headlight beam settings on Audi A3s equipped with halogen headlights.
- Press the knob once to quickly release it.
- To shorten or lengthen the range of the headlights, turn the knob toward 3 or 0 respectively.
- To engage it, briefly press the knob once more.
Only when the light switch is in the AUTO position does the adaptive light come on. On the MMI*Link, you can turn off the adaptive lighting.
Depending on the speed of the Audi A3 and the angle of the steering wheel, the lights automatically adapt to curves in the road when they are on. When you drive around a corner, this feature offers enhanced illumination. The mechanism is functional at speeds between 10 and 110 km/h.
Static cornering light (turning light)* (on Audi A3s with adaptive lighting): the turning light is automatically turned on when the steering wheel angle exceeds a certain value (up to about 70 km/h) or when the turn signals are turned on (up to about 40 km/h). When you exit at a junction, this feature improves the lighting at the side of the Audi A3.
Speed-dependent light distribution* – The Audi A3’s lighting is adjusted as needed in cities, on highways, and on other major routes thanks to this feature. If the navigation system is installed in your Audi A3, intersections can also be lit.
This feature adjusts the Audi A3 lighting on freeways based on your speed (on models with adaptive light or LED headlights only).
- Only the driver is intended to receive assistance from the automated headlamps. The driver is always responsible for using the headlights when necessary, and in low-light situations or areas with limited visibility, they may need to be manually turned on. For instance, fog cannot be detected by the light sensors. Therefore, whether you are in this situation or are traveling at night, turn on your dipped headlights.
- Use the lighting systems specified here in accordance with all applicable legal regulations.
The rear fog light should only be utilized in compliance with statutory restrictions to prevent blinding the vehicles behind you.
- The bracket for the interior mirror houses the light sensor for the automated headlights*. Stickers should not be placed on this area of the windscreen.
In This Article...
What does the daytime running light logo look like?
Symbols for daytime running lamps When the running lamps are turned on, one of these lights will be illuminated in green with tiny dots or lines spreading out from an oval form. All automobiles initially sold in Canada must have a DRL system.
Can automated headlights be turned off?
24 Solutions. Hello, Bchee. Not at all. Daytime running lights are installed on your 2002 Chevrolet Blazer, and the car is set up to turn them on anytime the engine is switched on. This feature can only be disabled by having a dealer connect it to his computer and turn off the daytime running lights.
Why is there no switch for my headlights?
Poor Relays Your headlights won’t switch off if your headlight relay is damaged; to solve this, replace the relay. Given the possibility that numerous circuits may use the exact same type of relay, this is a little simpler to examine.
How can I make my car’s lights go out when I open the door?
What a great concept! Despite the fact that every car is unique, the dome light should be able to be turned off in every one of them.
Prior to the big day, this can require some practice. Take a look around your car’s inside. Either the internal door or the ceiling should have a light switch. You might merely have an on/off switch, or you might be able to dim the light.
To make sure the light is out, try opening and closing the door multiple times before the event. Check the car’s owner’s manual under interior illumination if you need assistance.
A safety aspect to keep in mind is having the lights turn on automatically when the door opens. It not only makes it easier for the driver to see, but it also lets other people know that you will be strolling in the dark so they can keep an eye out for you. So make sure your flash mob parked in a quiet spot and stays safe.
While we’re on the subject of safety, having a roadside help subscription is always a good idea. Join Jerry’s roadside help program. For as little as $4.16 a month, you can receive benefits including towing, lockout service, jumpstarts, and a repair hotline.
Do Audi Q3 headlights automatically dim?
The switch should be turned to the proper setting. When the lights are on, the symbol illuminates.
OLights are off. When the light switch is in this position and the ignition is turned on, the daytime running lights* on Audi Q3s for specific markets turn on.
Headlights that automatically turn on. Depending on the ambient light level, either the automatic headlights or the daytime running lights* will turn on (for instance at dusk, in the rain or in a tunnel).
– Fog lamps in the back. Activate the side lights on the light switch (dipped headlights). Pull the light switch to the first position after that.
When the Audi Q3 is substantially loaded, a headlight range control is installed to keep approaching vehicles from being blinded.
The settings for the headlight beam are changed automatically (even during braking and acceleration).
Only when the light switch is set to AUTO (automatic headlights*) does the adaptive light function. The adaptive light automatically follows the curves in the road while accounting for the speed of the vehicle and the steering wheel angle. When you drive around a corner, this feature offers enhanced illumination. The mechanism is functional at speeds between 10 and 110 km/h.
Are Audi lights dimmable?
The headlights turn on automatically when the switch is set to AUTO, as
Snow or rain. When the dipped headlights are on, the insignia illuminates. The horn lights
a number of windshield wiper cycles But the instrument illumination doesn’t turn on.
If this feature is turned on in the MMI, everything will go normally. Nevertheless, if you switch
use the AUTO setting and don’t switch off after turning on the main beam headlights.
just the dipped headlights will turn on when the setting is changed back to that.
the following time you activate the AUTO feature. so that the main beam headlights can be used
once more, you must first return the main beam lever to the “off” position.
display the message
The dipped beam headlights will then be permanently turned on for safety reasons.
when the light switch’s AUTO setting is selected. But you can still change
the light switch to turn on and off the lights as usual. You must own the
Ensure that the headlights are constantly used when necessary, and you might need to switch
Fog is invisible to the light sensors. Consequently, you ought to always swap
- the location of the light sensor for automated headlight control
- You can change some of the external lighting’s settings.
- Leaving the lights on after removing the key from the ignition
- The applicable legislation requirements apply to the use of the illumination mentioned here.
- Only when the light is on does the coming-home/leaving-home function come on.
Why do my headlights continue to be on all day?
My automobile has a feature that activates the headlights whenever I enter a tunnel, multi-story parking garage, or a basement.
However, when I leave a parking lot or tunnel during the day, my car sometimes seems to “forget to switch off its automatic headlights.”
Photo sensors, which are essentially electronic devices that can measure the quantity of ambient light outside the automobile, are what auto headlights rely on.
These sensors are typically found on the dashboard, either behind the rearview mirror or at the base of the windscreen.
The sensors will signal the electrical controller to turn on the lights when the ambient light level is low and vice versa.
Sometimes, when daylight is detected, the sensors do not react quickly enough, either because the windscreen is dirty, limiting the quantity of light that can reach the sensor, or because the sensors are not sensitive enough.
It’s simple to fix the first issuejust wash your windscreen. For the second issue, get your car’s auto headlight sensors inspected or changed.