The technique for starting the Q5 using the key fob depends on the year of manufacture. In earlier models of Audi, the key is turned while the brake pedal is depressed and put into a slot in the dashboard. Similar to pressing the start/stop button, this will start the engine. The fob is “dropped” over a symbol of a key with lines extending from it in subsequent variants. The driver’s dashboard may include this emblem on the right side, just to the right of the steering wheel. This sign may be seen on the right side of the first cupholder in the center console of the 2018 Q5. Place the fob in the cupholder, press the start/stop button on the dash, then depress the brake pedal to start the car. The insignia is present on 2019 models inside the center console’s storage compartment.
Placing a dead key fob directly on the start/stop button will start an Audi Q5.
In This Article...
How can I start my Audi Q5 manually?
When starting Audi and Volkswagen models that feature a Start/Stop button and a slot in the dashboard, as illustrated, insert the fob into the slot and push the fob as the Start/Stop button, depressing the brake pedal.
How can I use a key to start my Audi A5?
Starter key
Turn the ignition lock with the key.
Manual transmission: Fully depress the clutch pedal and place the gear lever in neutral.
Press the brake pedal and slide the selector lever to P or N for an automatic gearbox.
To start the engine, turn the key.
Why won’t my Audi key work?
Audi models from 2000 to 2014, including the Q5, R8, A6, A8, Q7, A4, A3, TT, Allroad, A5 and A7, are covered by this TSB.
Although central locking by remote control no longer functions either continuously or intermittently, the locks can still be opened by hand. Because the battery has been disconnected or the remote control’s battery has been changed, the remote control key and vehicle may not be in sync. The remote control key may have been momentarily turned off if other senders (such as mobile phones, TV stations, wireless headphones, etc.) use the same frequency band. This is because it is impossible to clearly indicate the remote control key. This is required to stop other unconnected senders from accidentally unlocking the car.
To synchronize each remote control key with the car, do the following:
- Use the key to mechanically start the car.
- Depress the remote control key’s unlock button.
- Turn the ignition switch to the ON position after inserting the key.
- Reset the key to OFF and take it out of the lock.
- Press the remote control key’s locking or unlocking button.
- 2002 model year or later: Use the VAS scan tool to program the remote control key(s) to the Central Comfort System control module (address word 46) if the synchronization procedure did not work. Implement test plan J393-central control module for comfort system while adjusting the remote control key (channel 21). Sometimes after the “The test strategy of erasing all memory places first yields better outcomes.
- On the remote control key, press a button.
- With the key, lock or unlock the car once mechanically.
- The entire operation cannot go on for more than 30 seconds.
- Up until and including model year 2009: Use the VAS scan tool to program the remote control key(s) to the Central Comfort System control module (address word 46) if the synchronization procedure failed. adopting the remote control key and testing plan J393central control module for comfort system (s). occasionally after “The test strategy of erasing all memory places first yields better outcomes. Adapt the remote control key(s) to the BCM2 (vehicle electrical system control unit), address word 09, using the VAS scan tool, starting with model year 2010 if the synchronization procedure did not work. Adapt the remote control key as per test plan J519-Vehicle Electrical System Control Module (s).
In an Audi Q5, where do you hold the keys?
When the battery in an Audi proximity key fob becomes low, the car can have trouble detecting it and won’t start. To start the car, hold the fob close to the appropriate spot. In this particular model, the designated space is on the right side of the steering column.
How can I start my Audi A5 manually?
The Start/Stop button can be used to turn on the ignition and run the engine.
Manual transmission: Fully depress the clutch pedal and place the gear lever in neutral.
To start the engine, use the Start/Stop button. As the glow plugs warm up, the instrument cluster begins to illuminate.