For the TPMS to function properly, you must reset the recommended pressures anytime you change a tire, adjust tire pressures, or have a tire rotated. Here are a couple techniques for resetting the TPMS on an Audi A3 S3, depending on the model year of your car:
In This Article...
Models
On the Audi A3 S3 of the second generation, there are two ways to reset the TPMS. Both have unique approaches. Please select 1 of the 3 options listed below based on the specs of your vehicle.
With TPMS Button
The TPMS Set button can be used to reset tire pressure for vehicles manufactured in 2008, 2009, and 2010. This is how you do it:
- Make sure your tires are inflated to the recommended level as specified on the tire placard.
- But before starting the engine, turn the ignition on.
- When you hear a beep and the TPMS indicator blinks three times, press the TPMS SET button.
With Cluster Display
For the 20112012 Audi A3 S3, which has an information display with control on the wiper lever, follow these steps:
- Repeatedly press the RESET button until the screen reads “DISPLAY TYPE”
- The SET menu can be highlighted with the rocker button.
- To access the menu, use the RESET button.
- Choosing TIRE PRESSURE
- Choose “STORE NOW”
- To carry out the TPMS reset, choose CONFIRM.
Models
On the third-generation Audi A3 S3, there are two methods for resetting the TPMS. using the multimedia (MMI) displays for both. Please select 1 of the 3 options listed below based on the specs of your vehicle.
With MMI Display 1
In contrast to earlier generations, the MMI display allows you to reset the TPMS in this third generation. Continue as follows:
Don’t start the engine after turning the ignition switch to the ON position.
If your car has an ignition key, push the START-STOP ENGINE button once while keeping your foot off the brake.
- To enter the primary menu, use the MENU button on the MMI controls.
- Click on the CAR or VEHICLE menu.
- Choose SYSTEM.
- Select “ASSISTANCE & CHECKS
- Browse down and pick “MONITORING TIRE PRESSURE
- the STORE TIRE PRESSURE option
- To carry out the TPMS reset, choose YES.
With MMI Display 2
- On the central console, select MENU.
- Utilize the dial button to access the CAR or VEHICLE menu.
- Using the left control button, locate and choose SERVICE & CHECKS.
- Opt for TIRE PRESSURE MONITORING.
Models
The TPMS can be reset via the infotainment display, just like the prior generation, but the most recent version (2021 2022) makes use of a touchscreen. This is how you do it:
- Tap the VEHICLE or CAR menu on the MMI display from the Home screen.
- the SETTINGS & SERVICE option
These guidelines were taken from the owner’s manual for the Audi A3 S3. Both the second and third generations of the Audi A3 S3 should follow this method (2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 model years). TPMS Reset: Audi A3 S3 Tire Pressure Monitor System Light (2008-2021) should help you with your issue. Best of luck!
How can I restart my Audi a3’s TPMS?
How to Reset Your Audi’s TPMS
- The engine need not be running; just make sure the car is turned on.
- On the MMI control panel, select the systems control button by pressing the car button.
- Choosing Vehicle > Service & Checks Tracking tire pressure > Keeping tire pressure at > Yes, go to the store right away.
How can I clear the MMI for my Audi TPMS?
Resetting the Audi TPMS: Steps
- Start the car’s engine.
- On the MMI control panel, select the (Car) Systems control button by pressing the car function button.
- Choose Servicing and inspections.
- Select Tire pressure monitoring after that.
- Go to Store tire pressures and click.
- Select Yes, go to the store right away.
The TPMS reset button is where?
Tire pressure monitoring system is referred to as TPMS. The TPMS reset button is often located below the steering wheel. Your car’s TPMS needs to be electronically reset after you replace the tires in order to erase the error message. Hold the TPMS reset button down until the tire pressure light blinks three times, then let go of the button to complete the process. Your car should be started, and the sensor will refresh after 20 minutes.
Does the Audi A3 have a system to check tire pressure?
When one or more tires are under-inflated, usually by 25% or more, the Audi A3 / S3 dashboard’s tire pressure warning light will come on to let the driver know. The warning light could remain on even after you have checked and adjusted the tire pressure. You will need to reset the low tire pressure light on your Audi A3 or Audi S3 in this circumstance. Depending on the year of manufacture, this process changes.
What is the recommended tire pressure for an Audi A3?
If the tyre is for a 16-inch wheel, the recommended tyre pressure for the Audi A3 is 32 psi in the front and 30 psi in the rear, whereas for a 17-inch wheel, the recommended tyre pressure is 30 psi in the front and 29 psi in the rear.
My TPMS light won’t turn off; why?
When the TPMS warning light illuminates, proceed with caution. This indicates that at least one tire on your vehicle may not be inflated to the appropriate level by at least 25%.
*The simplest way to get the most accurate reading is to check the tire pressure before you drive on it when the tire is “cool.” If your TPMS light is on, first check that you have correctly reset your TPMS by following these instructions.
Will my TPMS light automatically turn off if I fill my tires with air after it illuminates?
Several minutes after reinflating the tires to the prescribed pressure, the TPMS light ought to go out.
What happens if I adjust the tire pressure but the light on my tire pressure gauge still doesn’t go out?
The only place that can fix a computer issue that causes the TPMS warning light to turn ON and flash ON for one second and OFF for three seconds is the dealership service center. When the TPMS warning light illuminates and remains on, one or more tires may have low tire pressure. The light ought to go out once the tire is inflated to the recommended tire pressure listed on the door placard. Always check the pressure in all of your tires because one or more of them may not be at the proper pressure.
Does Audi alert you to a low tire?
Messages of Caution on the Dashboard The TPMS warning, which appears as a yellow warning icon with an exclamation point on your Audi dashboard, may be visible. You might learn that one of the tires’ pressures is low via a text message that appears beneath the icon.
Where is the MMI for Audi?
Every new Audi vehicle has some sort of MMI. A display panel installed on the dashboard serves as the brain of the system. In certain designs, like the most recent Audi Q3 Sportback (above), it is built into the dashboard. Others feature a freestanding screen on top of the dash, such the A4 (seen below).
You can use the screen as a standard touchscreen, exactly like your phone, regardless of where it is located. Since not all Audi vehicles previously had touchscreen capabilities, Audi installed a rotary scroll wheel to the center console that could be used to browse the system’s menus. Currently, that is being phased out and is being replaced by a touchpad similar to a laptop, as seen in the Audi Q5 below.
With your index finger, you may write the letters of an address into the sat-nav as well as swipe through options. The touchpad may be challenging for right-handed drivers to use because it is situated to the driver’s left, but Audi’s technology is excellent at reading letters no matter how scribbled or distorted they may be.
Audi refers to the digital instrument display included with MMI as the “Virtual Cockpit.” Simply put, it is an additional high-definition digital screen that takes the place of the traditional analogue dials in front of the steering wheel.
Using buttons on the steering wheel, you may set this up to display a variety of driving information and satellite navigation directions.
Mercedes and BMW both offer comparable systems. Audi and BMW both have displays that resemble classic instrument binnacles, while Mercedes chose a single square widescreen design that hooks up with the center touchscreen, similar to the one in the Mercedes GLA shown above.
What does my Audi’s TPMS stand for?
The TPMS (Tire Pressure Monitoring System) is designed to notify you when a tire’s pressure is too low and may result in hazardous driving situations. If the indicator is on, your tires may not be properly inflated, which might result in premature tire wear and even tire failure. It’s critical to comprehend the value of appropriate tire inflation and how TPMS can prevent a potentially hazardous situation.
Both excessive and inadequate tire inflation can result in early tread deterioration and potential tire failure. Increased traction, early wear, and an inability to withstand impact from the road can all be effects of overinflation. The middle of the tread on tires with excessive air pressure may prematurely wear out. Underinflation, on the other hand, results in slow tire reaction, reduced fuel efficiency, excessive heat buildup, and tire overload. Both sides of the tread edges or shoulders will prematurely wear out on a tire that is underinflated.
Finding the TPMS indicator on your dashboard is easy if you’re just learning about tire pressure sensors. It is a light that has a horseshoe form with an exclamation point in the middle.
How is the TPMS manually reset?
Turn the key to the “on” position with the car off, but don’t let it run. When the Toyota tire pressure sensor blinks three times, hold down the TPMS reset button until it stops blinking. Start the car, then let it run for 20 minutes to let the sensor reset. Under the steering wheel is typically where you’ll find the TPMS reset button.