For the TPMS to function properly, you must reset the recommended pressures anytime you change a tire, adjust tire pressures, or have a tire rotated. Here are a couple techniques for resetting the TPMS on an Audi Q5 or SQ5, depending on the model year of your car:
In This Article...
R (2009-2017)
On this first-generation Audi Q5, there are two methods for resetting the TPMS. Only the menu system distinguishes them on the infotainment display. This is how you do it:
With Infotainment Display 1
- Make sure your tires are inflated to the recommended level as specified on the tire placard.
- But before starting the engine, turn the ignition on.
- On the middle console, press the CAR button.
- Opt for TIRE PRESSURE MONITORING.
- Choose “STORE NOW”
With Infotainment Display 2
- To open the CAR SYSTEM menu, press the left control button.
- Choosing SERVICE & CHECKS
- the STORE TIRE PRESSURE option
- To carry out the TPMS reset, choose YES.
A (2018-2021)
Just like the previous iteration, the most recent model (2019 2020 2021) uses a touchpad or a touchscreen to allow you to reset the TPMS via the infotainment display. This is how you do it:
With Touchpad
The MMI display allows you to reset the TPMS in this second generation. Continue as follows:
Don’t start the engine after turning the ignition switch to the ON position.
If your car has an ignition key, push the START-STOP ENGINE button once while keeping your foot off the brake.
- To enter the primary menu, use the MENU button on the MMI controls.
- Click on the CAR or VEHICLE menu.
- Locate and decide ASSISTANCE & CHECKS
- Choose “TIRE PRESSURE MONITORING” by scrolling down.
With Touchscreen
- Tap the VEHICLE or CAR menu on the MMI display from the Home screen.
- the SETTINGS & SERVICE option
These guidelines were taken from the owner’s manual for the Audi Q5 SQ5. Both the first and second generations of the Audi Q5 SQ5 should follow this method (2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 model years). Your issue should be resolved by reading the article 2009-2021 Audi Q5 SQ5 TPMS Tire Pressure Sensor Light Reset Guide. Best of luck!
On an Audi Q5, how do you reset the TYRE pressure light?
Resetting the Audi TPMS: Steps
- Start the car’s engine.
- On the MMI control panel, select the (Car) Systems control button by pressing the car function button.
- Choose Servicing and inspections.
- Select Tire pressure monitoring after that.
- Go to Store tire pressures and click.
- Select Yes, go to the store right away.
On an Audi Q5 2020, how do you reset the tire pressure light?
How to Reset Your Audi’s TPMS
- The engine need not be running; just make sure the car is turned on.
- On the MMI control panel, select the systems control button by pressing the car button.
- Choosing Vehicle > Service & Checks Tracking tire pressure > Keeping tire pressure at > Yes, go to the store right away.
The TPMS reset button is where?
Tire pressure monitoring system is referred to as TPMS. The TPMS reset button is often located below the steering wheel. Your car’s TPMS needs to be electronically reset after you replace the tires in order to erase the error message. Hold the TPMS reset button down until the tire pressure light blinks three times, then let go of the button to complete the process. Your car should be started, and the sensor will refresh after 20 minutes.
How can I disable the tire pressure indicator?
How to Clear the Tire Pressure Indicator
- Don’t start the car; just turn the key to “on.”
- While the car is off, disconnect the positive battery cable.
- All tires, including the spare, should be 3 PSI overinflated before being entirely deflated.
- Bring your car to our service department for qualified help.
Where is the Audi Q5’s tire pressure located?
Your tires should be properly inflated according to two categories: front inflation and rear inflation. The recommended tire pressure for the front tires and the rear tires of the 2011 Audi Q5 is 38 PSI and 42 PSI, respectively. Image 1. The door jamb sticker contains the PSI information.
Does the Audi Q5 have a system for monitoring tire pressure?
The tire pressure monitoring system warning light will illuminate if your TPMS sensor has stopped working or its battery has run out. You can rely on the professionals at your local Audi service center to conduct any required repairs on your Audi Q5 expertly.
What causes the low tire pressure light to keep flashing?
The TPMS (Tire Pressure Monitoring System) is designed to notify you when a tire’s pressure is too low and may result in hazardous driving situations. If the indicator is on, your tires may not be properly inflated, which might result in premature tire wear and even tire failure. It’s critical to comprehend the value of appropriate tire inflation and how TPMS can prevent a potentially hazardous situation.
Both excessive and inadequate tire inflation can result in early tread deterioration and potential tire failure. Increased traction, early wear, and an inability to withstand impact from the road can all be effects of overinflation. The middle of the tread on tires with excessive air pressure may prematurely wear out. Underinflation, on the other hand, results in slow tire reaction, reduced fuel efficiency, excessive heat buildup, and tire overload. Both sides of the tread edges or shoulders will prematurely wear out on a tire that is underinflated.
Finding the TPMS indicator on your dashboard is easy if you’re just learning about tire pressure sensors. It is a light that has a horseshoe form with an exclamation point in the middle.
Does Audi alert you to a low tire?
Messages of Caution on the Dashboard The TPMS warning, which appears as a yellow warning icon with an exclamation point on your Audi dashboard, may be visible. You might learn that one of the tires’ pressures is low via a text message that appears beneath the icon.
Why are my tires in good condition but my tire pressure sign is on?
It’s likely that one or more of your tires have low air pressure if you see the tire pressure indicator turn on. However, even if your tires are in good condition, there are a number of things that could cause the sensors to go off, so you shouldn’t rely only on the data from the tire pressure monitoring system of your car.
We’ve talked about some additional aspects of automobile maintenance in this piece. Read these articles if you have some time:
Should the TPMS be reset after purchasing new tires?
After changing or rotating your tires, or after adding new sensors, you should always reset your TPMS. Even after you have inflated your tires, some sensor manufacturers advise restarting the device. By teaching the primary TPMS system to identify the sensors in their new locations, resetting the TPMS is frequently referred to as retraining the system. TPMS reset procedures vary from vehicle to vehicle and typically involve a specific sequence of ignition and pedal actions, a configuration change in your dashboard menu, or the use of a TPMS Reset Tool.
How to reset your TPMS after tire service can be found in your vehicle’s manual or by asking your neighborhood Midas mechanic.
- Visual inspections of the brakes, battery, air filter, fluids, belts, and hoses are all included in the Midas Touch Courtesy Check.