You have probably already watched the video I made showing how to reset the Audi, and you are probably reading this to gain more knowledge.
- Push the start/stop engine button to start the car.
- the volume control, then move your hand to the right.
- and depress on it (the volume control)
- Aim to hold it for 15 seconds (seems like eons)
- then the message on the screen will vanish and then come back.
- The reboot is finished.
Hopefully, all of your app readouts and instructions for the drive modes, radio, garage, etc. are displayed on your screen.
In This Article...
How can I change my MMI settings back?
Methods For MMI Factory Reset
- In the MMI, scroll to the Settings option and click it. Select “Factory settings” from the list of options by scrolling down.
- To reset everything, select “Select all entries,” or pick and choose the specific choices you desire.
- Go to the list’s bottom and choose “Restore factory settings.”
Why won’t my Audi MMI work?
If your MMI doesn’t even turn on, it’s most likely not getting power. The compartment in the left side of your trunk houses the fuses that regulate a number of the MMI modules. Examine the fuses by prying open the side panel in the trunk.
How can my Audi MMI be updated?
Put the SD card in slot 1 and access the Engineering Menu in your MMI by selecting the “Update” option. Select SD1 as the source, then choose the firmware and “Standard” on the following page. Depending on the file size, the MMI update should take between 30 and 60 minutes to complete.
How can I clear the MMI on my 2018 Audi a5?
Push up on the radio and map buttons, hold them down, and simultaneously push the circular control, as Gman said. There is no need to hold down the circular control; just give it a short push. It will restart the MMI system.
How do I reset my Audi to its factory defaults?
Audi’s connected car WiFi: Factory Reset
- Select “Menu” from the head unit of the car.
- A setting.
- Upkeep of the system.
- restore the factory defaults.
- Pick to confirm. restore the factory defaults.
How can I reset the UI on my Audi smartphone?
Reset network settings by selecting Settings > General > Reset. Additionally, the Wi-Fi network and passwords, your cellular settings, and any previous VPN or APN settings will all be reset by doing this.
How can I activate my Audi MMI?
Before turning on the MMI system, you must turn on the ignition. The last primary function you selected will now appear in the menu. The most recent audio source will start to play.
Turn off the ignition to turn off the MMI system. Your preferences will be saved.
Press the ON/OFF button (Fig. 1) or one of the function selector buttons (Fig. 2) for a brief period of time to turn on the MMI system.
Press and hold the ON/OFF button until the MMI is turned off to turn off the MMI system.
If the MMI system was manually shut off the previous time it was used, it will not turn on when the ignition is turned on.
After the ignition is turned off, the MMI system continues to function for about 10 minutes. The MMI system will turn off automatically if no function selector, control, or rotary pushbutton on the MMI control console is pressed within this time frame.
- The MMI system will turn off automatically if the engine is off and the battery charge level is low.
- To enable or disable the MUTE function for the selected audio/video source Link, briefly push the ON/OFF button.