How To Remove Tow Hook Cover Audi

Fold out the other side/corner while removing the coverpress on the marking with a finger.

securely screw in the eye. Consider using the wheel bolt wrench* as a lever by threading it through.

How can one find a towing eye?

Rear: Remove the cover, push the marking with your finger, and then use a coin or something similar to fold out the other side or corner.

Incorporate the towing eye fully until it stops. securely screw in the eye. Consider using the wheel bolt wrench* as a lever by threading it through.

Taking out the towing eye

The car could be raised onto a recovery truck with a flatbed platform using the towing eye. Whether it is possible depends on the position of the automobile and the ground clearance.

If you try to draw the car up using the towing eye and the ground clearance under the car is insufficient or the slope of the recovery vehicle’s ramp is too steep, the automobile may be damaged.

Use the lifting mechanism on the recovery vehicle to hoist the car if necessary. The towing eye must not be used.

Warning

Nothing/nobody is permitted to hang around the recovery vehicle after the car has been towed onto the flatbed platform.

The towing eye is not intended to pull the automobile out of a ditch or get it unstuck; rather, it is only intended for towing on roadways. For aid with recovery, dial a recovery service.

How do removable tow bars function?

You can pick between a detachable and a fixed towbar once you’ve determined which towbar neck style is best for you. However, the kind, year, and model of your car will determine your towbar possibilities. Entering your vehicle’s VIN into our search tool is the best way to check which towbars are available for selection. As a result, we will only display towbars that work with your car.

What type of towbar do I need?

A permanent or removable flange towbar is required if you want to haul bikes while also towing them. A fixed flange or swan neck towbar would be ideal for routine towing because they are always available. A detachable swan neck towbar is the perfect option if you want a towbar that is more streamlined and that you can take off when not in use. The finest towbar for you, meanwhile, will ultimately rely on what works with your car.

How towbars work

You should be familiar with how it functions once you’ve decided what kind of towbar and neck you require. While you don’t need to be a towbar specialist to tow properly, you should understand the fundamentals of how fixed and detachable towbars operate.

How does a fixed towbar work?

Simple: a fixed towbar. You are always prepared to tow because it is fixed permanently to your car. Additionally, you don’t have to bother about properly attaching it or storing it when you’re not using it. You don’t need to do anything after installing a fixed towbar on your car, but you should be aware of it when parking or opening the boot.

How does a detachable towbar work?

Towbars that are detachable lock into place, keeping them safe and fastened to your vehicle. There is a release mechanism that is used to remove a detachable towbar. Additionally, you must unlock it because it cannot be taken off without the key. You might be possible to find an electrics holder that folds away when the towbar has been removed, but the towbar’s electrical components remain attached to the vehicle. To avoid jarring your legs while opening the boot after removing the towbar, place it within the trunk of your car.

What is preparation for an Audi trailer hitch?

What exactly is trailer prep? Simply said, towbar wire that has already been partially placed at the factory, frequently up to the back of the car, is referred to as a trailer’s preparation. This enables the completion of the wiring with a much shorter and less expensive wiring kit.

What place is the tow eye?

If your car doesn’t already have one, you can find a spare tire in the tool tray. Find the towing eye cover by going to the front of your automobile. Push the lid firmly on one side to release it. Put the recovery hook where it belongs in the hole and rotate it counterclockwise.