If you can find someone selling them, keys cost about 10. Even Bristol Audi was unable to provide them for me. The Halfords around me were worthless. The only outlet I could locate to buy them wanted $8.99 and claimed they would take at least two weeks to arrive on backorder. Since I had just received my ICE-Link that morning and was eager to install it, I couldn’t wait that long. 10 minutes of web browsing, and voila!
In This Article...
How is a radio key used?
The Radio Key 600 (RK600) is a fully programmable, standalone access control system that allows up to 600 users to enter by proximity or keypad (PIN), using either a card or key tag or a PIN code. An internal reader and programmer are included into the small, weather-resistant Radio Key 600 Access Control Unit, which is surface mounted. The proprietary DYNASCAN* technology of Secura Key ensures peak performance in any setting.
To offer exceptional defense against weather and vandalism, Radio Key 600 can be used with the optional Auxiliary Reader (RKAR). When installed outside, the Auxiliary Reader prevents entry by tampering. The Access Control Unit and Auxiliary Reader can both be installed behind glass or other non-metallic wall surfaces for added security. The Access Control Unit can be used as both an enrollment reader and an exit reader when equipped with the Auxiliary Reader. There are no large control panels to install; each unit mounts easily to a single-gang electrical box, masonry wall, post, or practically any surface.
Simply place your proximity tag next to the Access Control Unit or optional Auxiliary Reader (RKAR) to utilize Radio Key 600, or input your PIN number on the keypad. Using the built-in keypad, programming is simple to do. Without the tags present, proximity tags can be added by holding each tag close to the device or by using the keypad. To nullify tags, set the latch time, and choose between active, inactive, or unlocked modes, utilize the keypad as well. Connection to a PC or serial printer is possible with the optional RKAT Audit Trail Module. RK-LINKTM Software (included with RKAT) offers transaction history reports, permits proximity tag or PIN programming, user name database, and other reader settings. Additionally, RK600 RAM can be backed up and recovered using RK-LINKTM Software.
How can I locate the radio code for my VW?
All Volkswagen car radios come with a theft prevention feature that shows “secure code This feature is susceptible to unintentional activation, just like many car security systems. Fortunately, a reading Volkswagen radio is simple to unlock “secure code
The secure code security feature locks the radios in Volkswagen models in an effort to stop thieves from taking them. A radio will turn on once the feature is active, however it will simply show “secure code The user is unable to turn on the volume, play a CD, connect an MP3 player, or tune to a radio station until the correct code is entered. In essence, the radio is now useless.
In the event that a radio loses power, the security feature is activated. A radio must be disconnected from the car’s battery in order to be stolen from it since else it would stop working. There will be a time when the radio is not linked to any power sources, even if the thief is quick and attaches it to another power source right away. Therefore, a disruption in the power supply portends a possible burglary.
A radio can lose power in other situations besides burglaries, though. There will be at least a brief period of time when the radio is powerless if a car’s battery has to be replaced or is dead. Because a radio cannot detect whether a burglary is taking place or a car’s battery is being removed, this power outage will trigger the safe code security function.
If the radio in your Volkswagen says “Until you input its safe code, you won’t be able to use it. You must know the four-digit safe code in order to unlock the radio.
The safe code for your Volkswagen radio may be located in one of several locations. It’s in the radio manual that comes with your Volkswagen’s original documentation. If you don’t have this paper, you might be able to locate the code on the spare tire or in the trunk. When a driver takes a Volkswagen to a dealership for this problem, the dealer frequently attaches a tag with the code on the spare tire or the trunk lid.
You must ask a dealer to search up the code if you can’t find it. By using the VIN of your car or removing the radio and searching up the serial number, any Volkswagen dealer can look up the code.
Once you have the code, entering is simple. The first four preset buttons each represent one of the code’s numbers. To put it another way, the first preset is used to enter the first digit, the second preset the second digit, and so on. When a preset is pressed, the associated number is raised by one, with “9 returning to “0. (Only the top four settings are used if you have more than four.) The seek buttons can be used to switch back and forth between the digits.
Upon seeing “2 Safe Code signifies that the wrong safe code has been typed in twice. The next time you enter the code, you must wait an hour.
Your radio will be completely operational once the correct code has been entered and it has been unlocked.
If the radio in your Volkswagen is showing “If you need a safe code but don’t know what it is, visit Fox Valley Volkswagen in Schaumburg or St. Charles. The specialists at the dealership can rapidly check and enter the radio’s code for you because they have assisted several Volkswagen drivers with similar problems.
Without a key, how can I take out my Alpine radio?
The removal keys are always included in the shipment. However, you can still uninstall your Alpine Head Unit if you misplaced them. Allow us to explain.
Step Three : Use your Alternative Key
You need to discover a replacement that functions similarly to the factory keys because you have misplaced them. To be honest, there are some good alternatives as well.
Some individuals insert two tiny, thin blades into the keyhole. However, if you are not careful enough, it may lead to some mishaps for you.
You can also use two wires to access the clips by inserting them into the keyhole. The wires only need to be inserted into the keyholes simultaneously, and once you feel the clips, you may push the wires apart.
Using a coat hanger is another efficient way to remove the Alpine head unit without the keys. You must cut a coat hanger into 8-inch lengths in order to use it. The next step is to cut two U shapes that will fit into the keyholes. Then you can press the U-shape coat hanger tools outward after inserting them into the hole.
You will know you can remove the stereo at this point if you hear a click, which indicates that it is working. I suppose you now understand how to remove an Alpine stereo without keys.