All you have to do is gently pull up on the apertures in your grill while simultaneously pulling the plate bracket in your direction. FOR PERSONS WITH FRONT PARKING SENSORS, THERE IS LITTLE TO NO WIRING SLACK, SO DO NOT PULL THE BRACKET AWAY FROM THE GRILL WITH ANY FORCE.
In This Article...
How are license plates attached without screws?
How to Install a License Plate on a Car Without Screws
- Make sure both the rear of the license plate and your car are dry and clean before beginning to apply VELCRO Brand Heavy Duty Tape.
Can you attach a license plate to Velcro?
To answer your concern, the Velcro WILL hold up quite fine. However, if you ever want to detach the component from the paintwork again, there may be a problem. However, if you have a clear bra, this won’t be an issue because the clear bra will fall off in its place.
How is a front license bracket removed?
Probably the hardest step is this one. Your bracket will need to be attached in one of two ways, so choose one of the following:
1. Use a screwdriver or socket wrench to remove any nuts or screws holding the bracket in place. The bracket ought to be freed from the car as a result.
2. The bracket must be removed if it is fastened using what seems to be a rivet (see photo). Using a drill bit that is 1/8″ or larger and pressing down to ensure that it goes all the way through the rivet’s center is a rather simple procedure. The rivets on each side should be released once you have gone all the way through, allowing you to take the bracket off.
After removing the bracket, you should clean the area to get rid of any dust and grime. Any damp cloth or paper towel should do. If necessary, apply some window cleaner to remove any remaining dirt.