Using the digital display located in the middle of the dashboard of your Audi A3, you can clear and reset the tyre pressure warning light.
- Make sure the car is stopped and the engine is off.
- Check all tires, using the recommended pressures, and make any required adjustments (tyre pressure sticker can be found inside driver door).
- Turn the ignition key to the ON position without starting the engine.
- Enter the Display Type menu by pressing the button on the window wiper’s end.
- Upward scrolling, choose Set.
- Select Tyre Pressure as you scroll down.
- choose Store, then confirm.
In This Article...
Where is the Audi A3’s tire pressure sticker?
Scroll down a little on the results page to see the tyre pressure and tyre size information next to the automobile symbol.
Please be aware that several automakers frequently recommend a different tire pressure for specific winter tires.
The tyre pressures shown are merely guidelines. You can find the appropriate tire pressure for your car in the maintenance manual, on a label inside the front dooroften on the passenger sideor even on the gasoline cap.
To determine which MICHELIN tire is perfect for your car, feel free to use our tyre selector or get in touch with a tire dealer.
How much pressure should an Audi A3 tire have?
If the tyre is for a 16-inch wheel, the recommended tyre pressure for the Audi A3 is 32 psi in the front and 30 psi in the rear, whereas for a 17-inch wheel, the recommended tyre pressure is 30 psi in the front and 29 psi in the rear.
Does Audi alert you to a low tire?
Messages of Caution on the Dashboard The TPMS warning, which appears as a yellow warning icon with an exclamation point on your Audi dashboard, may be visible. You might learn that one of the tires’ pressures is low via a text message that appears beneath the icon.
How is the tire pressure of a car checked?
determining tire pressure
- Remove the cap covering the tire’s air valve, and store it safely away.
- For a few seconds, firmly press the tire gauge against the exposed valve stem.
- Check the air pressure display.
- Compare this value to the tire pressure that is advised.
- Change the air valve cap on the tire.
How can I turn off my Audi a3’s tire pressure warning light?
How to Reset Your Audi’s TPMS
- The engine need not be running; just make sure the car is turned on.
- On the MMI control panel, select the systems control button by pressing the car button.
- Choosing Vehicle > Service & Checks Tracking tire pressure > Keeping tire pressure at > Yes, go to the store right away.
What does an Audi’s MMI do?
You will have fewer control buttons to press thanks to the Audi MMI (Multi Media Interface) system, which streamlines audio, vehicle settings, and navigation controls into a single interface. Additionally Bluetooth-enabled for audio and mobile devices, Audi models provide you hands-free access to many features.
The material in Audi owner’s manuals must be used in conjunction with the information from tutorials. For complete details, consult your owner’s handbook. By using this website for information, you acknowledge that your owner’s manual is the primary source for details on your Audi as well as safety precautions.
How do Audi tire pressure sensors function?
Direct TPMS: A sensor mounted on each wheel monitors the pressure in each tire, and it alerts you via the dashboard light if the pressure falls below 25%.
The Audi Q3’s tire pressure is what?
For the Audi Q3, the recommended tire pressure for all four tires is 32 to 33 psi. It will be easier to retain superior control and fuel economy under this pressure.
How can I tell if the pressure in my tires is low?
Do not freak out if you forgot your pressure gauge at home. You can also use your hands to check the pressure in your tires.
Put your hand on the tire and push down. Low tire pressure will result in a soft, mushy tire. The tire is overinflated if it feels like rock and you cannot apply any pressure to it at all.
Keep your touch on the tire and pump air into it if it seems too low. To feel the tire pressure, keep pushing down. If the tire is initially overinflated, gradually let some air out while checking for softness along the way. You need to be able to gently press into the tire.
Why are my tires in good condition while my tire pressure sign is on?
Several cars now come with a built-in tire pressure monitoring system (TPMS). An indication light will flash on your dashboard if the air pressure in your tires drops below the recommended level.
The information system in the dashboard may have a menu that shows you which of the four tires is malfunctioning. The TPMS indicator may be on in a number of circumstances, however your tires may not require replacement or upkeep.
If this occurs and all of your tires seem to be in good condition. This light may illuminate even if your tires are in good condition for a number of different reasons. The decrease in outdoor temperature is one explanation. To double-check and confirm it, it is advisable to maintain a tire pressure gauge in the automobile.