For the TPMS to function properly, you must reset the recommended pressures anytime you change a tire, adjust tire pressures, or have a tire rotated. Here are a couple techniques for resetting the TPMS on an Audi Q5 or SQ5, depending on the model year of your car:
In This Article...
R (2009-2017)
On this first-generation Audi Q5, there are two methods for resetting the TPMS. Only the menu system distinguishes them on the infotainment display. This is how you do it:
With Infotainment Display 1
- Make sure your tires are inflated to the recommended level as specified on the tire placard.
- But before starting the engine, turn the ignition on.
- On the middle console, press the CAR button.
- Opt for TIRE PRESSURE MONITORING.
- Choose “STORE NOW”
With Infotainment Display 2
- To open the CAR SYSTEM menu, press the left control button.
- Choosing SERVICE & CHECKS
- the STORE TIRE PRESSURE option
- To carry out the TPMS reset, choose YES.
A (2018-2021)
Just like the previous iteration, the most recent model (2019 2020 2021) uses a touchpad or a touchscreen to allow you to reset the TPMS via the infotainment display. This is how you do it:
With Touchpad
The MMI display allows you to reset the TPMS in this second generation. Continue as follows:
Don’t start the engine after turning the ignition switch to the ON position.
If your car has an ignition key, push the START-STOP ENGINE button once while keeping your foot off the brake.
- To enter the primary menu, use the MENU button on the MMI controls.
- Click on the CAR or VEHICLE menu.
- Locate and decide ASSISTANCE & CHECKS
- Choose “TIRE PRESSURE MONITORING” by scrolling down.
With Touchscreen
- Tap the VEHICLE or CAR menu on the MMI display from the Home screen.
- the SETTINGS & SERVICE option
These guidelines were taken from the owner’s manual for the Audi Q5 SQ5. Both the first and second generations of the Audi Q5 SQ5 should follow this method (2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 model years). Your issue should be resolved by reading the article 2009-2021 Audi Q5 SQ5 TPMS Tire Pressure Sensor Light Reset Guide. Best of luck!
Can the Audi Q5’s tire pressure be checked?
The recommended tire pressure for the front tires and the rear tires of the 2011 Audi Q5 is 38 PSI and 42 PSI, respectively. Image 1. The door jamb sticker contains the PSI information.
On an Audi MMI, how do you check the tire pressure?
On the MMI control panel, select the (Car) Systems control button by pressing the car function button. Choose Servicing and inspections. Select Tire pressure monitoring after that. Go to Store tire pressures and click.
Do I have a tire pressure monitoring system on my Audi?
Every Audi car has a Tire Pressure Monitoring System (TPMS) that keeps track of whether the tire pressure is within acceptable ranges. The TPMS indicator will illuminate on the dashboard to notify the driver if the tire pressure is detected as being either too low or too high.
Does Audi alert you to a low tire?
Messages of Caution on the Dashboard The TPMS warning, which appears as a yellow warning icon with an exclamation point on your Audi dashboard, may be visible. You might learn that one of the tires’ pressures is low via a text message that appears beneath the icon.
How are tire pressures checked?
determining tire pressure
- Remove the cap covering the tire’s air valve, and store it safely away.
- For a few seconds, firmly press the tire gauge against the exposed valve stem.
- Check the air pressure display.
- Compare this value to the tire pressure that is advised.
- Change the air valve cap on the tire.
How is tire pressure stored on an Audi Q5 MMI?
On the MMI control panel, select the systems control button by pressing the car button. Choosing Vehicle > Service & Checks Tracking tire pressure > Keeping tire pressure at > Yes, go to the store right away.
Why are my tires in good condition but my tire pressure sign is on?
It’s likely that one or more of your tires have low air pressure if you see the tire pressure indicator turn on. However, even if your tires are in good condition, there are a number of things that could cause the sensors to go off, so you shouldn’t rely only on the data from the tire pressure monitoring system of your car.
We’ve talked about some additional aspects of automobile maintenance in this piece. Read these articles if you have some time:
What signifies low tire pressure?
The majority of individuals are aware of their most crucial warning lights. When the dashboard on your car illuminates in vivid red, it’s difficult not to identify these signs and symbols. It is frequently very obvious that something is wrong when you see a dreadful warning light, and you need to identify the root of these problems and create a repair strategy.
Even if certain less common warning lights don’t necessarily signal oncoming emergencies, it’s still critical to understand them and act immediately when they do. A yellow “check engine light” obviously indicates that you should take your automobile in to have the engine checked, but other of them aren’t as obvious. The tiny yellow horseshoe with an exclamation point in the middle, for instance. What does that mean exactly?
Your low tire pressure symbol is a horseshoe, and it indicates that one or more of your tires have low air pressure. You might be rapidly losing air due to a puncture, in which case you need to take immediate action. However, even if there is no immediate danger, it is a good idea to pull over and refuel flagged tires as soon as you can. Uneven tire wear is caused by uneven tire pressure, which over time can cause instability in a vehicle. Low tire pressure also reduces your car’s fuel economy.
The TPMS reset button is where?
Tire pressure monitoring system is referred to as TPMS. The TPMS reset button is often located below the steering wheel. Your car’s TPMS needs to be electronically reset after you replace the tires in order to erase the error message. Hold the TPMS reset button down until the tire pressure light blinks three times, then let go of the button to complete the process. Your car should be started, and the sensor will refresh after 20 minutes.