When the wipers are halfway down your windshield, switch them ON before turning them off on your Audi Q5.
In This Article...
Lift your wipers up from the windshield
It should be simple to lift your wipers up and away from your windshield once they are stopped halfway on your windshield. The old wipers on your windshield should protrude and point away from you. Now providing for simple access throughout the remaining modifying procedure.
Before you remove old wiper blades
Make sure to note which side the new blade length belongs on. Measure the previous blades’ length or simply compare it to the new Trico wiper blades. Then, position the fresh blades on the appropriate side.
Remove old wiper blades
The windshield wipers on your 2010 Audi Q5 are operated by a “Narrow” 19mm Push Button attachment. Click the button or tab. Slide the old wiper off after that.
Various wiper manufacturers employ various push button attachment styles.
Connect the new Trico Tech Beam Blade wipers
When using this arm type, the preattached adaptor on the wiper blade must be removed and replaced as shown with the adapter (BC)
1. Move the tiny adapter lever in the direction of the blade’s center.
2. As you complete step 1, remove the factory-installed adaptor from the blade and throw it away.
3. Locate the BC adaptor and place it in the blade’s middle. the two protrusions inside the adaptor onto the “X”-marked region of the blade.
4. Push the tab on the adaptor’s front (B).
5. Remove shim (C) from adaptor (B) and throw it away. Tip: To remove shim (C) more easily, press down on the top edge of adaptor B.
6. Connect the tabs on the adaptor’s back end.
7. Draw the blade into the arm’s underside.
8. The hole on the top of the arm must lock the button on the adaptor’s top into place.
On an Audi A1, how do you elevate the wipers?
When the wipers are in the servicing position, the windscreen wiper blades can be replaced.
Make sure the wiper blades are not stuck to the windscreen during ice weather.
Within 10 seconds, turn the ignition on, turn it off, and then move the windscreen wiper lever to position -4 in Fig. 2.
To release the wiper blade, press the release button -1. Fig. 1 While doing this, hold on to the wiper blade.
Incorporate the replacement wiper blade into the wiper arm’s mounting -2-. It should start moving the wiper arm when you do.
Turn on the engine and operate the windscreen wiper lever to return the windscreen wipers to their initial position.
- The wiper blades should be cleaned using a window cleaner solution if the wipers leave streaks on the glass. If there are insects or other contaminants on the wiper blades, they should be cleaned using a soft sponge or cloth.
- The wiper blades ought to be replaced once or twice a year for safety’s sake.
- Before lifting the wipers from the windscreen, make sure they are in the servicing position! Otherwise, it could harm the wiper motor or the paint job on the bonnet.
- Never drive the Audi A1 while the front wiper arms are up; as the car starts moving, they return to their regular park position. As a result, the paint job on the bonnet could be harmed.
The servicing position can also be used, for instance, to attach a cover over the windscreen in the winter to prevent ice buildup.