Rear wiper arm, raise it away from the window. Pull the wiper blade out of the retainer together with its attachment. In the arrow-pointing direction, press the wiper blade mounting into the retainer. Back on the back window, fold the wiper arm down.
In This Article...
Lift your wipers up from the windshield
It should be simple to lift your wipers up and away from your windshield once they are stopped halfway on your windshield. The old wipers on your windshield should protrude and point away from you. Now providing for simple access throughout the remaining modifying procedure.
Before you remove old wiper blades
Make sure to note which side the new blade length belongs on. Measure the previous blades’ length or simply compare it to the new Trico wiper blades. Then, position the fresh blades on the appropriate side.
Remove old wiper blades
The windshield wipers on your 2016 Audi Q3 are operated by a “Narrow” 19mm Push Button attachment. Click the button or tab. Slide the old wiper off after that.
Various wiper manufacturers employ various push button attachment styles.
Connect the new Trico Tech Beam Blade wipers
When using this arm type, the preattached adaptor on the wiper blade must be removed and replaced as shown with the adapter (BC)
1. Move the tiny adapter lever in the direction of the blade’s center.
2. As you complete step 1, remove the factory-installed adaptor from the blade and throw it away.
3. Locate the BC adaptor and place it in the blade’s middle. the two protrusions inside the adaptor onto the “X”-marked region of the blade.
4. Push the tab on the adaptor’s front (B).
5. Remove shim (C) from adaptor (B) and throw it away. Tip: To remove shim (C) more easily, press down on the top edge of adaptor B.
6. Connect the tabs on the adaptor’s back end.
7. Draw the blade into the arm’s underside.
8. The hole on the top of the arm must lock the button on the adaptor’s top into place.
How are the rear wiper blades removed?
If a service technician changed the wiper arm as part of the service, follow these instructions to replace the wiper blade on the back window.
applies to V60, V60CC, and V60H models made before to 15W26 when the wiper arm is replaced during maintenance.
To loosen and remove the blade, take a firm hold of the wiper arm and press the blade forward (at the arrow).
Car model/model year
V60 up to and including the 2016 model year applies to vehicles in which the wiper arm is changed during maintenance.
Consult the relevant model’s online handbook for vehicles starting with the model year 2020.
How do you take the Audi A1’s rear wiper arm off?
How to Replace the Rear Wiper Assembly in an Audi
- Step 1: Take off the plastic cover. The only component of the wiper arm that is connected to your car is the plastic cover at the base of the arm.
- 2. Remove the nut. Remove the nut holding the assembly in place using your 13mm socket.
- Install a replacement arm in step 3.
What size wiper blades fit the Audi A3?
Depending on the model year, the Audi A3 requires a different size wiper blade.
For instance, the driver’s side blade and passenger’s side blade measurements for the 2020 Audi A3 are 26″ and 19″, respectively, while those for the 2013 Audi A3 are 24″ and 19″, respectively.
The Audi A3’s wiper blades are a crucial safety component and should be frequently inspected, cleaned, and replaced as needed.
Check your blades once a week or anytime you find that they are not preserving the visibility of your windshield.
It’s crucial to use the proper Audi A3 sizes when changing the wiper blades when the time comes.
For comprehensive information about your specific Audi A3 model year, scroll down or quickly jump.