- Step 1: Get the bolts ready. Into your Audi’s cargo space you go.
- Jack up the automobile in step two. Grab your jack and place it beneath your vehicle now.
- 3. Remove the steering wheel. Take hold of the wheel firmly with both hands and remove it.
- Install the spare or new tire in Step 4.
In This Article...
How much do new tires on an Audi A4 cost?
Common Audi A4 tires cost $150 to $350 per, however high-performance tires can cost upwards of $500 per tire.
An Audi A4’s jack can be found where?
- On a solid, flat surface, park the car as far away from oncoming traffic as you can.
- Turn on the parking brake.
- Turn on the hazard lights.
If there are any passengers in your car, ask them to get out and go somewhere safe.
Audi A4 Flat Tire Equipment
You should have a vehicle tool kit, tire mobility kit, and vehicle jack in your car, all of which may be found in the trunk’s luggage area underneath the cargo floor cover (trunk).
- Pull the strap holding the cargo floor cover up to reveal the front compartment (1).
- Pick up the cargo floor by the plastic handle to access the rear compartment (2).
- (2) Secure the plastic handle to the seal on the baggage compartment
- Pull the plastic lever of the cargo floor toward the back to completely remove it (2).
- If your car has a spare tire, turn the handle in the other direction to take it off.
- Before locking the lead on your trunk, unhook the cargo floor.
Depending on the vehicle’s accessories, the compressor, tire mobility kit, and tool kit may all be concealed under a different cover that is fastened with a hand wheel.
If your vehicle has a storage bag for the jack, the storage bag is fastened with tie-straps in the baggage area and needs to be fastened again after use.
Using The 2020 Audi A4 Tire Mobility Kit
The use of slime to inflate a flat tire is only a temporary solution. If feasible, replace the damaged tire right away. Never remove a nail or other sharp object that has punctured a tire from the tire. Temperatures as low as (-4F) or below can be used with the tire mobility kit (-20C).
Where is the jack in the 2017 Audi A4?
Always give the jack* a stable platform on the ground. (The vehicle’s tool kit has the jack.) Use a sizable, sturdy board or another type of support if necessary. To stop the jack from slipping on a hard, slippery surface (like tiles), use a rubber pad or something comparable.
Find the Fig. 315o indication on the door sill that is closest to the wheel that needs to be changed. The indication under the door sill is in front of the jacking point.
When the jack’s claw completely encircles the seam on your car, turn the knob to wind up the jack* underneath the jacking point on the door sill.
Place the jack* so that its base plate is flat on the ground and its claw (A) fits around the seam. The jacking point (A) must be supported vertically by the base plate (B).
Now attach the crank handle to the jack by fitting it into the knob’s aperture. To fix the crank handle in place, turn it either clockwise or counterclockwise.
Wind the crank handle to raise the car till the broken wheel is off the ground.
- Verify the jack’s stability. The jack runs the risk of slipping or sinking in if the ground beneath it is slick or mushy.
- To raise the car, only use the jack* that came with it. The risk of injury increases if you use a jack from another vehicle because your car can slide off the jack.
- Only use the jack* at the jacking points that are behind the door sill markings, and make sure it is properly aligned. If the jack* is not correctly engaged, there is a danger of damage since it may suddenly slip off.
- Never start the engine when the chance of an accident is high!
- If work is to be done below the vehicle, make sure it is securely supported on appropriate supports to reduce harm risk!
It is forbidden to raise the car on its sills. Only use the jack* at the jacking locations that are behind the door sill markings. In the absence of that, your car can be harmed.
When should I get new tires for my Audi?
You should replace your tires if they are older than six years. The tread depth is the second factor to consider when deciding whether or not to replace your tires. The 2/32 inch mark denotes the smallest safe tread depth.
Do all four tires on a Quattro need to be replaced?
In order to prevent damage to the drive system brought on by continual variations in the wheel speeds, all four wheels of cars with four-wheel drive must always be equipped with tires of the same type, brand, and tread pattern.
The four wheel drive gearbox will not be negatively impacted by the usage of tires with different levels of wear.
That kind of baffles me since it looks like it would be inappropriate to put brand-new Good Years on the back and brand-new Contis on the front, yet it would be acceptable to use the same brand with 6mm on the rear and 2mm on the front.
Need specific tires for Audis?
To see which winter tires are made to match your Audi model, select it from the list below.
Using the drop-down menu below, choose a vehicle body style:
Decide on a vehicle body type.
High-Performance All-Season Tires from Audi are engineered to assist retain traction in light snow on occasion while balancing comfort, handling, a quiet ride, and tread life. High-performance, fast-rated Audi All-Season Tires are ideal for sporty sedans, avants, and cabriolets.
Characteristics:
- To improve handling and stability at high speeds, the outside tread has been stabilized with larger blocks.
- On slick surfaces, siped tread blocks and horizontal grooves improve traction.
- To prevent hydroplaning, deep grooves help push water aside.
- The tread compound is made to balance dry and wet traction.
- Increased tread blocks on the inside tire shoulder increase grip in wet conditions.
The most potent Audi vehicles require special tires that assist maximize their technology and performance. *,* For drivers who demand nothing less, our assortment helps give maximum traction coupled with exceptional handling and braking characteristics. for models S, RS, and R8.
- The outside tread’s larger tread blocks enhance cornering performance.
- To aid high-speed capability, the tread was stabilized.
- To aid prevent hydroplaning, circumferential grooves force water to the side.
- A minimum amount of siping (slits) increases tread-to-road contact.
When a tire is damaged, Road Hazard Coverage* can help with the expense of repair or replacement. Additionally, we provide this coverage on all qualifying tires, unlike other tire retailers who charge for it.
- Road Hazard Coverage for 24 months or until there is no more tread left in the tire, whichever happens first*
- 100% of the first year’s tire replacement costs
- second year tire replacement cost of 50%
*An authorized third party is providing the Road Hazard Protection. Coverage expires (1) 24 months after the date of purchase or (2) when less than 3/32 of the tread is left, whichever occurs first. 100% coverage the first year; the consumer is in charge of paying 50% of the tire’s second-year retail price. Only winter tires, original equipment Audi tires, original equipment Audi alternatives, and wheel and tire packages are permitted. excludes NexenTM tires, mounting, and balance. Non-transferrable. There are other limitations. For information, consult the program booklet or participating dealership.
Has Audi ever used run-flat tires?
Run-flat tires are installed on vehicles at the factory by a wide range of luxury automakers. They are present in most BMW and Mini models. Run-flat tires are also standard equipment on Mercedes-Benz cars and SUVs. They are also used by Audi, Cadillac, Lexus, and Infiniti, among other luxury automakers.
In an Audi A4, where is the locking wheel nut located?
The tool bag with the lung wrench and the wheel lock key are typically located next to each other in the foam under the floor. The tool bag with the lung wrench and the wheel lock key are typically located next to each other in the foam under the floor.
What size lug nuts fit an Audi?
They are 17mm, but a plastic cover that appears to be around 21mm thick is placed on top of them. You can take them out with a little gripper instrument that resembles tweezers.
Do the wheels of an Audi A4 lock?
The Audi Wheel Locks have a freely spinning ring that prevents the wheel bolts from being opened without the right adapter, making them ideal for individuals wishing to add an extra layer of security to their new Audi.
Option 1. Purchase a new key
Even if it occasionally costs more, this is the choice that is easiest to choose. However, you’ll need to purchase a new locking wheel nut key if you want to use the original locking wheel nut set.
Each key has a code that allows you to order an extra from the car’s maker. The only location to find this code is on the plastic storage bag or locking wheel nut storage box, which is a problem if both are missing.
Option 2. Locking wheel nut removal & replacement
Many clients who have misplaced their locking wheel nut keys request that our technicians remove them and replace them with a universal locking wheel nut set. These sets are made to fit a variety of automobiles so you won’t have to buy from the car maker, but they will still secure your alloy wheels. This choice frequently costs less than buying a new key.
Removing locking wheel nuts without a key
Without the proper key, our experts utilize a specialized tool to release the locking wheel nuts. On the majority of automobiles, this technique works well, although it is subject to variables like wheel design and whether the wheel nuts were overtightened before removal. However, our specialists can usually safely remove the wheel nuts.
Can wheel locks be removed by a tire shop?
You are not alone if you discovered that the wheel lock key is gone, stripped, or that one of the lock nuts is damaged. It’s a very typical issue.
A wheel lock key frequently just becomes worn out after prolonged use. There are a few methods available if this occurs and you are unable to remove the wheel locks using the tools you have.
Calling your technician or a nearby auto repair shop is one alternative. Some mechanics may be able to unlock the wheel locks without a key since they have specialized tools (sockets) for the job. It might be pretty simple in certain cars and challenging in others. They might require a hammer and penetrating oil to assist them.
Another choice is to go to the service section of the nearby same-brand dealership.
Dealership mechanics can unlock your wheels since they have the master set of keys that are unique to the manufacturer. A simple service like that typically doesn’t require an appointment unless the dealership is extremely busy. Naturally, the dealer might bill you for work. If the wheel lock nut is cracked or stripped, a dealer should be able to remove it.
The next decision is whether you want to add standard nuts instead of the wheel locks. Wheel locks may deter theft of your wheels and tires, but how frequently does this actually occur in your community? But if someone truly wants to steal your car’s wheels, they can figure out how to get the locks off.
In light of this, many owners decide to use standard nuts when mounting winter tires on steel rims or if the car is older. If the original nuts are still kept somewhere in the trunk, it might be helpful. You won’t have to be concerned about losing or damaging the key if you use standard nuts.
Is it possible to obtain a new wheel lock key? A key can be ordered separately from a lock from some vendors, but it will take some time to get there. Wheel locks are typically only sold by sets at dealerships.
For a set, the cost varies from $20 to $120. A replacement wheel lock set can also be ordered online; the costs are in this range. Wheel locks are a common feature on automobiles thanks to McGard. As long as you have the key code, which is typically saved with the set as an ID card, you can even order the key alone from them online. You can also check the pouch holding your owner’s manual.
Which location is ideal for keeping a wheel lock key? The key is typically kept in the spare tire well in the trunk, along with the jack and the wheel wrench. When bringing their vehicle in for maintenance, many automobile owners put the key on display in the center console so that the technician will know where to find it if necessary. In this manner, if they misplace the keywhich can happen occasionallyyou will immediately discover it when you get your car back.
Wheel locks are not required; standard OEM nuts or bolts will suffice as long as they are correctly installed, fitted to the rims, and torqued in accordance with specifications. When in doubt, consult the owner’s manual or ask your mechanic.
Why are lock nuts used in cars? It’s a security feature meant to make stealing the wheels more challenging. A set of wheel lock nuts or bolts and the key that matches that design are provided. The majority of the time, a dealership technician will install wheel locks during the pre-delivery inspection.
The factory-installed key and regular nuts are typically stored in the glove box or trunk, occasionally in a plastic case or tiny pouch.