- Activate the metal key.
- Using a little screwdriver, press the key’s back cover.
- At the fob’s end, lift the back cover.
- The battery should be inside if the back cover is removed.
- Remember the orientation before removing the battery.
- The battery needs to be replaced correctly.
In This Article...
Can you replace the battery in an Audi key yourself?
Flip the metal key open. Using a little screwdriver, press the key’s back cover. At the keyfob’s end, lift the back cover. The battery is within the back cover, which you should remove.
How long is the life of an Audi key battery?
WMBF – MYRTLE BEACH, SC A key fob is used by millions of drivers to lock and unlock their vehicles.
Keyless entry is a fantastic feature, but you can only benefit from it if you keep the technology up to date.
The little things in life can often mean the most, such as not having to search through your purse for your keys or using your key fob to raise and unlock the back doors so you can load groceries.
But what occurs if the fob breaks down? The key fobs for your car require maintenance just like the vehicle itself does.
When anything breaks down, Gary Freeman, owner of C & G Auto in Myrtle Beach, advised against replacing it right away.
“A replacement fob can be pricey; they can cost several hundred dollars, and once you have a replacement fob, they need to be programmed,” said Freeman.
He advises checking the battery as your first action. If you have to push the remote lock or unlock multiple times before it finally locks or unlocks, that could be a sign that the battery is starting to lose power, according to Freeman.
According to his calculations, the keyless entry remote can be safely stored or hung up anywhere beyond the six to ten feet from which the automobile computer system can read the fob.
According to Freeman, the battery life for the majority of automotive key fobs is three to four years with regular use. Additionally, he claims that the battery life of your fob may be impacted by where you keep it. Freeman advises against hanging the fob near the car or leaving it in the car overnight.
It (the key fob) sends signals continuously, which drains the battery in the key fob and causes an excessive drain on the battery of the car since a computer recognizes that signal as indicating that I’m ready to start, according to Freeman.
According to Freeman, if the key fob malfunctions, the automobile frequently won’t start because the computer system won’t acknowledge that the key fob is present in the vehicle.
The owners’ manual will typically answer any questions you have about it, and almost any auto repair shop can replace that battery, said Freeman.
Do you need to reconfigure your key fob after changing the battery?
A remote key fob needs to be associated with your vehicle particularly in order to be secure.
This stops people who drive the same make and model of automobile as you from using their remote to access your car. You’ll need to reprogram the fob if changing the batteries has erased this connection or if it was somehow disrupted in order for it to once again recognize your automobile.
Standard programming sequence
Your key fob can typically be reconfigured by following this typical procedure:
Instead of starting and then returning to the locked position, turn the key into the run position. Repeat this multiple times.
You’ll typically hear a chime or other sound when you’ve cycled the key enough times. At that point, you can push the lock or unlock button on your key fob to hear another chime.
Why won’t my Audi key work?
Either by hand or with a little flathead screwdriver, remove the battery. Have your local Audi dealer check to determine if your key fob has been matched to your engine immobilizer if your battery is in good shape and you recently bought your key fob.
Why won’t my Audi accept my key?
The key fob won’t be recognized by your car because the remote’s battery is dead. The actual remote is damaged or is no longer programmed to your vehicle. Low automobile battery voltage. The keyless entry system has to be fixed.