All TEMPS….5W-40, 5W-30, 0W-40, 0W-30 – Use a viscosity grade appropriate for the climate, season, and driving conditions where the vehicle is used if synthetic oil that satisfies the applicable Audi, Volkswagen oil quality standard with the recommended viscosity grade is not readily available in your area. Verify that the oil satisfies the requirements for Audi and Volkswagen.
In This Article...
What is the Audi A4’s oil consumption?
The high-tech engine in the Audi A4 requires frequent oil changes since it is precise and sophisticated, and it will not run on old or unclean oil. Although the engine is complex, changing the oil is an excellent DIY project for the home mechanic to save money (oil changes are a significant source of revenue for the average service center) and will give you the confidence to take on more maintenance tasks, such as, perhaps, a full service. The best recommendation is to get a workshop manual and adhere strictly to the instructions, but in general, you must drain the old oil, change the oil filter, replenish the oil, and dispose of the old oil in an environmentally responsible manner (many councils operate oil recycling stations). The Audi is a complicated machine with many parts jostling for space, so it’s probably not a job for the utterly inexperienced. Despite this, it’s not a difficult job for a mechanic.
Before ever grabbing a spanner, there are a few things you need to understand. These include the kind of Audi A4 oil you require, the parameters for the oil filter replacement process, and how frequently to change the oil (often referred to as the oil-change interval). Additionally, you must be certain of the exact year of your car because Audi changed its standards over time. For instance, the specs of a 2007 Audi A4 may differ from those of a 2010 or 2013 model. When buying the oil and new filter, be very particular because even a 2011 and a 2012 Audi A4 had variances under the hood. Don’t forget that the A4 has also extensively employed 1.8 and 2.0 size engines, as well as a diesel alternative, which has its own unique servicing requirements. Once more, your buddies are the workshop manual and the parts interpreter at the store where you buy your oil and filter. Knowing the VIN of your automobile can also be very helpful in determining the precise parts you require.
For both gasoline and diesel engines in the Audi A4, a fully synthetic 5W30 oil is the recommended choice. For a diesel oil change, you’ll need five liters, and for an A4 petrol engine, you’ll need 5.2 liters. For the petrol engine and the turbo-diesel, the proper replacement oil filters are the Ryco (or comparable) R2748K and R2740P, respectively.
What kind of oil does a 2013 Audi A4 consume?
6.7L (7.0qt), or roughly 5.0 L. (5.3 qt.) * Oil and fluid part numbers are for reference only. See the Repair Manual and/or Maintenance Manual in ElsaWeb for details on proper fluid level and filling.
The amount of oil a 2.0 T Audi needs.
Warm up the engine oil by driving the vehicle. It takes around 15 minutes of driving to warm up the oil. To help the engine degunk a little, we put a bottle of Motul Engine Clean. If you decide to do this, you can add this and, rather than driving the car, let it idle for 15 minutes. The oil was just heated enough, in our opinion.
Step 4
To let the pressure in the crankcase escape, open the bonnet and remove the oil cap. Make sure your car is off before removing the oil cover, which should be obvious. If the hole into the crankcase is unclean, remove the cap and carefully clean the area. Don’t allow any dirt or other debris fall in.
Step 5
You need to find the engine oil filter. It is located directly above the motor mount on the driver’s side of the engine. Remove the protective cap found on the oil filter’s base. Screw the oil filter housing drain tube head into the bottom of the filter from underneath the car until you encounter resistance. After that, attach the hose, being sure to crimp the line. Once you hear the drain valve click, keep screwing. Oil ought to begin to flow down the pipe. To allow the hose drain into your drain pan, unpinch it. When it’s finished, re-pinch the hose and allow it to capture any remaining drips.
Step 6
Under the automobile, climb. A piece of cardboard should be placed beneath the oil pan if you have never changed your own oil before. Grab a 19mm socket and ratchet. The drain plug is located on the car’s passenger side. As soon as the socket is firmly in place, gradually apply pressure until the initial bond snaps. You should be able to unscrew the bolt by hand for the most part (be careful, the oil pan is probably still very warm).
Step 7
Take hold of your drain pan and position it next to the drain plug. Continue to unwind the plug’s screw. Oil will start to leak out, giving you a hint as to where the end is. Let the stopper fall into the drain pan when it eventually releases. Hopefully you’ve caught the initial jet of oil by holding it close to the plug and it hasn’t sprayed all over your driveway. Just observe the direction of the oil flow before lowering the pan to the ground. The flow will drip out as it slows. Allow the oil to drain for ten minutes or so.
Step 8
Review the engine oil filter once more. After unscrewing the hose and head, drain any leftover oil. Unscrew the oil filter from underneath the car using the oil filter socket (you may need an extension). You ought to be able to manually unscrew it after releasing the initial binding. Oil should be drained into the drain pan after removing the assembly. Throw out the old filter.
Step 9
Remove the new filter and seal from the packaging. Take note of where the old seal is located on the filter housing (you can use a small protruding tab to determine its exact location). Reinstall the new seal after removing the old one and applying a little of the used engine oil. Replace the housing with the new filter and tighten the screws. To assist it catch the threads, you might need to apply some pressure, but once it does, it should screw on without any difficulty. Adjust the filter’s tightness to 25 nm using the torque wrench (newton meters). Replace the shielding cap.
Step 10
Put the oil pan’s new oil drain stopper in place. So that you don’t cross-thread it, screw it in by hand. When it’s tight, tighten it to 30 nm with a torque wrench (newton meters). If a torque wrench is not available, tighten it with a ratchet until you feel resistance, then loosen it by roughly a quarter turn.
Step 11
Oil the engine and add. The 2.0T has a 4.5L oil capacity. Add it gradually through the crankcase hole. If you’re not sure how much to add, err on the side of caution and add less (you can always add more, but it’s difficult to remove oil from the mixture afterwards). Make sure the cap is tightly secured.
Step 12
Start the vehicle, then look for leaks. Replace the belly pan and place the car back on the ground if there are none. 10 minutes after starting the automobile, check the oil level and make any required adjustments. Put the used engine oil in the designated disposal (I put it in the oil containers that are now empty, a funnel helps greatly here). Local rules vary, but the majority of gas stations and other locations that sell oil will accept your used oil.
What kind of oil does a 2015 Audi A4 consume?
Your 2015 Audi receives improved performance and protection from our European Car Formula Synthetic Motor Oil. It complies with a wide range of requirements and has received manufacturer approval. For sensitive emissions systems to function effectively, European Car Formula includes a wide variety of viscosities and levels of emissions system protection. Follow the manufacturer’s or the owner’s manual’s recommended drain intervals.
The best oil for an Audi A4 is?
Castrol EDGE Professional engine oil is suggested by Audi. Check the label on the container, which should indicate the specification, or visit your authorized Audi Dealer, who will have approved oil in stock and available for purchase, to confirm that you are using an approved oil.