The aux input on the 2010 Audi Q5 is simple to locate. It won’t take more than three to five minutes of your time. To begin with, enter your car from the passenger side. Next, check out the glove compartment. Look inside the compartment after opening it. The aux input port should be plainly visible on the interior, or inner wall, of the glove box. This connector allows you to connect your phone or other device to your car and enable bluetooth and streaming.
In This Article...
Has the 2016 Audi Q5 AUX input?
Your mobile devices can be connected to the Audi music interface so that you can use the MMI to control them and charge the batteries.
Under the armrest in the center console, as seen in Figure o, is where you’ll find the Audi music interface.
- To use a USB adaptor to connect a mobile device: Connect the appropriate USB adapter (see Fig. 248) to the Audi music interface connection (see Fig. 248) before attaching it to a mobile device (see Fig. 1). (e.g. iPhone).
- Utilizing a USB adaptor to charge a mobile device: A mobile device’s battery is immediately charged when it is connected to the Audi music interface using the proper USB adaptor -2- Fig. 248o.
- In order to remove a mobile device from the Audi music system: Fig. 248o: Removing the USB adapter from the Audi music interface.
- Press the release tabs on the Apple dock connector in order to separate mobile devices with Apple dock connectors from Apple devices.
The media are launched and controlled using either the mobile device or the MMI linko, depending on the device you’re using.
To connect two mobile devices: When two mobile devices are coupled together (for example, an iPhone and a smartphone), both of them can be utilized as playback sources.
The analog AUX interface allows for the connection of mobile devices:
- To attach a smartphone to the AUX input: Before attaching the mobile device -4-, attach the cable -5- Fig. 248o to the AUX input -6- on the Audi music interface (e.g. MP3 player, smartphone).
- Remove the cable from the AUX input -6- Fig. 248o in order to remove the mobile device from the AUX input.
- Operation: Decide on and validate the source. Figure 5. External audio player The mobile device is used to launch and control media, as seen in Fig. 248.
The road conditions of today demand your complete attention. The safety of the car and other drivers is entirely your responsibility as the driver. Never use a mobile device while driving since accidents could happen!
- Please be cautious when removing the connector from the Audi music interface to prevent damage to the connection.
- To connect devices with an inbuilt USB connector, use a USB extension cord (e.g. USB sticks). The Audi music interface and your USB device will both be protected from harm as a result.
- Mobile devices can be harmed by extreme heat or cold (which is frequently found in a car’s interior) and/or have their functioning impaired. In extremely hot or extremely cold weather, kindly do not leave your mobile devices in the car.
- As long as the energy management system does not intervene, the USB ports will continue to receive electricity even after you turn off the ignition.
- Avoid using additional USB extension cables or adapters when connecting mobile devices to the Audi music interface that have an integrated cable or that require a USB adapter (linko); doing so could affect performance.
- Audi dealers or specialized stores sell the AUX adaptor cable.
- Mobile devices that don’t adhere to the USB 2.0 specification may not operate as intended.
- There is no support for USB hubs.
- The USB adapter for devices with Apple dock connector cannot be used to connect some iPod models, such as the iPod shuffle. The AUX adaptor cable can be used to connect these gadgets.
- The media center might not display content that has been modified on a mobile device1 linked to the Audi music interface. Reset the Media settings to their factory defaults in this situation.
- Only USB storage devices are supported for video playback using the Audi audio interface, according to the system (e.g. a USB stick). Smartphones and other Apple or MTP devices are not recognized as USB storage devices.
- Mistakes with the iPod or iPhone also affect how the device operates while using the MMI. In this situation, kindly restart your iPhone or iPod.
- We advise you to use the most recent iPod/iPhone software available. For crucial information about using your iPod or iPhone, please refer to the operating instructions.
- Via the USB adapter on the Audi music interface, iPod touch and iPhone models with Lightning connectors up to and including iOS 5 are supported.
Where is the AUX in the 2013 Audi Q5?
Registered. It’s possible that you have an AUX socket fitted within the arm rest compartment even if it’s not on the specifications. If it is there, it is on the wall of the room facing the front of the car.
In an Audi A5, where is the AUX port?
Using the USB charging port, you can recharge the batteries of your mobile devices. The analog AUX interface is used to connect mobile devices.
Under the armrest in the center console, in Fig. 38, are the AUX input and the USB charging port.
- To attach a smartphone to the AUX input: Before attaching the mobile device -4, attach the cable -5, Fig. 252o, to the AUX input (e.g. MP3 player, smartphone).
- Remove the cord from the AUX input -6- Fig. 252o to remove the mobile device from the AUX input.
- Operation: Decide on and validate the source. Figure 5. External audio player The mobile device is used to launch and control media in Fig. 252o.
In the Audi MMI, how do I enable AUX?
Depending on your Audi, you might want to turn on the AUX pin on the head unit when upgrading our CarPlay and Android Auto systems (Normally the cars equipped with the Audi AMI media interface).
Reminder: If you have an Audi AMI interface, you can utilize an AMI-AUX adaptor in place of turning on AUX. This will function well, however you will need to run a cable from our IMI-1000 wiring harness to the AMI input. This is not ideal, even if it will work “clients prefer an installation that is fully hidden.
This is because the AUX pin on the MMI head unit is immediately connected to our retrofit CarPlay and Android Auto Kits via our plug-and-play wiring loom, making the activation of the pin an elegant and entirely concealed solution.
This article will demonstrate the procedures needed to turn on the AUX pin on the head unit’s back “Once the activation procedure is complete, you will see AUX as a choice in the media menu on the main display.
Enter “Coding
The first thing to do is save the current settings before making any coding modifications. The “current code” highlighted in the conversation below must be saved in order to accomplish this. Keep this in a text file (.txt) so you can recode to it in case something goes wrong.
Apply coding to 5F module
Then click “Do it!” after pasting the updated coding string into the dialogue box below.
You can begin coding the 5F module once the new coding string has been put into the dialogue box above.
You may now pick AUX-IN from the Media menu to pass audio signals from the IMI-1000 and the MMI sound system when utilizing our retrofit CarPlay and Android Auto Kits.
How do I get my Audi q5 to play music from my phone?
Turn on your Audi, then put it in PARK. Press Phone > Connect Mobile Device on your Audi’s touchscreen. Now the system will start looking for devices. On the Audi touchscreen, choose the device you want, and make sure the PINs on both of them match.
Audi has aux, right?
The Audi Music Interface or a standard 3.5mm AUX plug are both acceptable external music inputs for the R199 (AMI). The R199 AMI for MMI 2G was a box that resided in the left upper corner of the glove box and was optically connected to the MOST loop.
How can my Audi MMI be updated?
Put the SD card in slot 1 and access the Engineering Menu in your MMI by selecting the “Update” option. Select SD1 as the source, then choose the firmware and “Standard” on the following page. Depending on the file size, the MMI update should take between 30 and 60 minutes to complete.
Describe MMI cable.
Audi created the Multi Media Interface (MMI) system, an in-vehicle user interface media system, and debuted it on the Avantissimo concept car at the 2001 Frankfurt Motor Show.