Although the Nissan Juke is a dependable travel companion, it is a machine with hundreds of interrelated parts, and like all machines, it occasionally fails to perform as intended. In this article, we’ll go over the most typical reasons why Jukes break down and how to fix it.
The most frequent reasons why your Juke won’t start normally include a dead key fob battery, a dead 12 volt battery, corrosion on the battery terminals, a bad alternator, a clogged fuel filter, a broken starter, a blown fuse, an empty gas tank, an immobilizer error, or any other electrical system issue.
In This Article...
What Could Be Wrong If My Nissan Juke Makes A Clicking Noise But Won’t Start?
The starting motor in your Nissan Juke most likely has a problem if the vehicle won’t start and produces a clicking noise.
We’ll examine the Nissan Juke in greater detail now that we know why it makes clicking noises. You might also be curious about how to reset a Nissan Juke or how much it will cost to replace the starter. Is it possible to jump start a Nissan Juke? Is the Juke a dependable make of vehicle? Continue reading this post to find out what we learned through our research to get the answers to these questions and more.
Let us first state that we hope you find the links provided here beneficial before you continue reading. We may receive a commission if you buy something after clicking on one of the links on this page, so thank you!
Swiftab
No programming will be lost if the battery dies on the key fob. There is nothing further that needs to be done there.
If your fob battery did die, you may always press the start button with the fob body. Thus, that component of the circuit would be tested.
My best estimate is that the automobile battery no longer has the cranking amps required to engage the starting. If the car starts after being jumped, I recommend changing the battery.
the causes of your Nissan Juke not starting
It’s possible that the battery was weak, the car key was left in the ignition, or both, causing your headlights to stay on all night. Check the lighting of your headlights first to make sure that this is truly coming from the battery and not from anywhere else. It would be hazardous for your battery if the lighting was dim or nonexistent.
How is a Nissan Juke manually started?
If your Nissan car, truck, or SUV has a key fob port, you can still insert the fob into the port and depress the START/STOP button while tapping the clutch or brake pedal. Simply step on the brake or clutch while pressing the key fob against the START/STOP button if your Nissan doesn’t have a port.
How do you use the key to start a Nissan Juke?
Kicking Off Your Nissan If your Nissan vehicle has a key fob port, you can insert the fob into the port and depress the clutch or brake pedal while pressing the START/STOP button. Simply step on the brake or clutch while pressing the key fob against the button if you don’t have a port.
What causes my Nissan Juke to lose power?
Fuel pump or filter malfunction: Since the fuel pump is in charge of supplying your car with fuel, it may lose power if it starts to wear out or if the in-tank filter clogs up and restricts the flow of fuel. Your car may occasionally make sputtering noises at high speeds, act as though it’s going to stall as you accelerate from a stop, or just stop running when it’s stressed by a slope or a heavy load if the fuel pump is malfunctioning or unable to push fuel through the filter.
Vacuum leak: When a vacuum leak is present in your car, it prevents the computer from controlling the air-to-fuel ratio, which can occasionally result in a loss of power. These leaks frequently result in the Check Engine “If you pay close attention beneath the hood of your car, you will typically hear a hissing sound coming from the engine area.
Ignition system: In addition to power loss, your car may occasionally have trouble starting when the ignition system is faulty. The majority of the time, a tune-up will fix this issue, but it’s crucial to have a trained mechanic inspect the system as a whole. Less parts are normally replaced during modern tune-ups than in the past, but the fuel injection system is given more focus at the same time.
Timing belt or chain: A worn timing belt or chain might lead to your engine’s valves opening and closing at the incorrect intervals, which can occasionally cause a loss of power. A minor clattering sound at the front of the engine is frequently present when the timing is incorrect.
Catalytic converter: When the catalytic converter malfunctions or gets clogged, it inhibits the engine from getting the necessary airflow, which can result in power losses. In addition to losing power, your automobile could also run hotter than usual or have inconsistent idling. Your catalytic convertor can be quickly checked by a mechanic using a vacuum gauge to see if it is working properly.
Airflow sensor: When your airflow sensor malfunctions or is dirty, it may provide the engine’s computer the incorrect signals, which may cause power losses while accelerating. Your Check Engine light will typically be caused by this issue “even when there is power, a light may turn on and your car may act slowly.
My car won’t start, but the battery is fine. Why?
Your starter may be the issue if the battery appears to be in good condition. A starter is a little motor that uses battery power to pull current in order to start an engine. When you turn the key in the ignition, you can hear a clicking sound if the starter fails or malfunctions. In some cases, loose connections are the issue, while in others, a new starter may be required. There is no assurance that jumping a car will fix starter issues.
What are the Nissan Juke’s primary issues?
Seven recalls have been issued for the Juke due to potential issues with everything from oxygen sensor issues to gasoline leaks, so it’s important to check with a Nissan dealer before buying any vehicle to ensure that the necessary repairs have been made.
What should you do if the problem isn’t the battery yet your car won’t start?
- Try switching the relays.
- Smack the fuel tank if you can.
- Attempt to dry out a flooded engine.
- Attempt to deceive the computer
When a push-start car won’t start, what should you do?
Your automobile may have a dead battery if your keyless entry system is functional but your engine won’t start. Check the battery voltage with a voltmeter to make sure that this is the issue. The battery needs more voltage to start the automobile if it has less than 12.4 volts.
Why won’t my car start even if it has power?
When a new engine won’t start, the battery is typically at blame. However, a dead battery and an alternator are mostly out of the question if the car is still getting electricity. Some batteries could ship from the factory with a lesser charge retention capacity. This is a manufacturing flaw, and the warranty allows for a replacement.
However, it is simple to believe that the battery is in perfect condition if a car won’t start but still has power. It can be very deceiving, especially if the lights, horn, and other electrical components work well. This is because not all peripherals use the same amount of energy.
To start the engine, however, the starter motor requires a lot of power. It’s possible that a battery nearing the end of its useful life won’t be able to power the starter motor sufficiently. Additionally, some electronic ignition systems start out by using a lot of energy. But since they draw less power from the battery, accessories like lights, horns, and radio systems might function.
Everyone may become confused at this point. So, get your multimeter and examine the battery terminals if your car won’t start but has electricity. It should ideally read 12 volts with the engine off, if not extremely near to it. The battery is on the verge of dying if not.
Start the car, switch on most of the accessories, and read it once more. When you press the accelerator, the voltage shouldn’t drop; instead, it should rise to 13.5 to 14 volts. If this doesn’t happen, there might be a problem with the alternator. When a car won’t start yet has power, this is the most typical problem.
When your Nissan key fob dies, how can you start it?
- To release the little latch, flip the key fob over and press the button.
- Find your concealed emergency key at the base of the fob and remove it.
- Unlock the driver’s side door by inserting the key.
- Step inside your Nissan.
How does a Nissan JUKE CVT’s transmission fluid level get checked?
Using a 14mm check bolt located on the transmission’s bottom, you may check the fluid level. The transmission must be level and at an angle of 114 degrees. Then you remove this bolt while the car is still moving. If liquid gently drips out, the level is good; if nothing comes out, more fluid needs to be added.
What should I do if the battery in my Nissan key is low?
You can resume using the key fob to start and enter your car once the battery in your Nissan smart key is replaced. The steps to follow to change the battery in your key fob are as follows:
- When the battery died, you could still enter your Nissan by using the concealed key.
- Remove the old battery and the key casing.
- Place the negative side of the CR2025 battery upward before replacing it.
- Reassemble the key fob and give it a try!
How may a sensor prevent an automobile from starting?
Frequently, a malfunctioning crankshaft or camshaft sensor is to blame for an engine that will turn over but not start.
All contemporary engines are loaded with engine management sensors that provide real-time data to the ECU. Both good and terrible things may result from this. On the one hand, having a diagnostic reader and knowing what to look for can make it much simpler to diagnose a problem.
A malfunctioning sensor, on the other hand, can produce erroneous readings and leave you stuck on the side of the road.
The camshaft sensor, crankshaft sensor, mass air flow (MAF) sensor, manifold absolute pressure (MAP) sensor, and throttle position sensor are the most typical sensors that prevent your automobile from starting.
Each time the intake valve on cylinder number one opens, a signal is transmitted to the ECU by the camshaft position sensor. The Crankshaft Position Sensor (CKP) signal and that information are then used to determine when the intake valves on the remaining cylinders are opening. When an engine begins, a defective camshaft sensor won’t be able to precisely determine the position of the camshaft, which may result in a misfire or possibly prevent the engine from starting at all.
P0340 and P0335 error codes are frequently set off by issues with the camshaft and crankshaft sensors, respectively.
as already mentioned. The air entering the intake manifold is being watched by the mass air flow sensor. By continuously measuring the air pressure, the manifold absolute pressure (MAP) sensor keeps an eye on the air in the intake manifold. The fuel delivery rate is set by the ECU using the readings from the MAP and MAF sensors. The engine will run rich if either one or both of these measurements are abnormal. The engine will typically stall or misfire as a result of this. Additionally, while the engine is attempting to start, it may flood.
The check engine light will frequently illuminate and the error number P0106 will be stored in the ECU if the MAP sensor fails.