When the tire pressure light blinks three times, release pressure on the TPMS reset button. Start the car and let it run for 20 minutes to let the sensor reset. Under the steering wheel is typically where you’ll find the reset button for the tire pressure monitor. If you still can’t find it, look in the owner’s manual of your car.
In This Article...
All American-made automobiles must have direct or indirect TPMS systems fitted as of 2008 as a result of the TREAD Act’s 2007 mandate.
The TPMS sensors for the Nissan Maxima’s direct TPMS system are mounted inside the wheel. The TPMS sensors will send information to the vehicle’s ECU if one or more tires show low tire pressure. Each tire pressure or an indicator light (low-line TPMS system) will be displayed on the dashboard (high-line TPMS system).
An OBD TPMS relearn is advised to write the IDs to the vehicle’s ECU when a sensor is changed in one or more Nissan Maxima tires.
Resetting the TPMS Warning Light on a Nissan Maxima:
- On the tire placard on the door panel, adjust the tire inflation pressure as directed.
- After a few miles (kilometers) of driving cumulatively at 25 mph, calibration will be finished.
Try the following method at your own risk if the above method does not work.
- Find the plug for the TPMS interface. The OBD II wire loom under the dash is connected by this white female connection. The tape securing the TPMS interface plug to the OBD II wire loom may need to be cut.
- Connect a wire or paper clip to the plug interface.
- Do not start the engine after turning on the ignition.
- Six times, tap the paper clip’s tip on any exposed metal surface.
- If your theory is true, the TPMS warning light will begin to slowly blink.
If it flashes quickly, something is wrong. Check your connections, turn off the ignition, and restart at step 4 if yours isn’t slowly flashing.
- After you’ve made sure the lights are still flashing, it will take 20 minutes of continuous driving at 16 to 25 mph for the calibration to be finished.
- The low tire pressure will cause the light to turn on again rapidly. Fill your tires with the appropriate amount of air.
This guide was provided to us by Nissan experts. The most recent Nissan Maxima generations can be repaired using the aforementioned procedure ( 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 model years). I hope you found the post on how to reset the TPMS warning light on a Nissan Maxima useful.
Tire Pressure Sensor Reset
Identify the TPMS system type.
If the direct system is used by your 2012 Nissan Maxima, resetting the tire pressure sensors might only require pressing a reset button on the dash or navigating a menu as described in your owner’s handbook. If your 2012 Nissan Maxima has an indirect system, a dealer or one you have purchased yourself must reset the system using a magnet or scanning equipment. In order to reset some systems, the ignition must be turned on while the reset button is pressed and held down for three seconds within the glove box.
Pump up the tires.
Ensure that all tires are inflated appropriately. All tires must be fully inflated because you are resetting the sensors to “zero,” or else the sensors won’t be properly calibrated and their readings will be off.
Evaluate the battery.
If the sensor in your 2012 Nissan Maxima is powered by a battery, make sure it is not dead. The battery should be changed every five years. Since the battery is integrated, in certain cases this necessitates replacing the complete sensor unit.
Make the transponders new.
Every wheel has a unique transponder. Each responder’s location changes when the wheels are rotated, and the TPMS needs to learn their new locations. Although this relearning process varies depending on the vehicle, you can get more information in the TPMS chart in your manual or online. If the valve stems double as tire pressure sensors, it is a good idea to swap them out when purchasing new tires.
Apply the magnet technique.
Press the lock and unlock buttons on the key fob when the key is in the ignition but the engine is not running. Placing a magnet over each valve stem after the initial chirp will cause the horn to chip for each valve in the following order: left front, right front, right rear, and left rear. Make that the driver information center is showing the pressure values.
Utilize the scan tool approach.
The owner’s manual’s TPMS Reprogramming Procedure menu prompts can be followed if no sensors are being replaced.
Nissan, where is the TPMS reset button?
There is a TPMS reset button, which you can press. The specific placement is specified in your owner’s manual, however it is typically found underneath the steering wheel. By placing your keys in the “on” position while keeping your engine off, you can operate this. When the TPMS light flashes three times, continue holding the button.
On a 2015 Nissan Altima, where is the TPMS reset button located?
For the sensors to reset, start the car and let it run for 20 minutes. The button to reset the tire pressure monitor is under the steering wheel.
How is the Nissan Maxima reset?
- Ensure the accelerator pedal is completely depressed.
- After pressing the “ON” button, wait at least two seconds.
- Switch the ignition to “OFF” and wait for at least 10 seconds.
- After pressing the “OFF” button, wait at least 10 seconds.
Without a reset button, how do you reset a TPMS?
The system must be put in relearn mode in order to reset the light. Make sure the tire pressures are all set evenly and according to the specifications first. To prevent the battery from going out, you might need to first connect a battery charger on low. All accessories must be turned off. After turning the key to the “On” position for 20 minutes with the engine off, drive the car at a speed of at least 16 mph for at least 7 minutes. The light will turn off once the relearn operation is complete. If the light does not turn off, the system needs to be fixed. Tire pressure sensors may need to be replaced because they can start to malfunction after 5 or 6 years of use.
The informative nature of the aforementioned claims warrants independent verification. kindly visit our
Where is the button to reset the TPMS sensor?
Under the steering wheel is typically where you’ll find the TPMS reset button. Consult the owner’s manual for your car if you can’t find it. All tires should be inflated to 3 PSI more than what is suggested, then completely deflated. Include the spare tire as well, as it can feature a sensor.
How is the TPMS manually reset?
When the tire pressure light blinks three times, release pressure on the TPMS reset button. Start the car, then wait for the sensor to refresh for around 20 minutes. Under the steering wheel is where you’ll locate the reset button for the tire pressure monitor. If you can’t find it, consult the owner’s manual for your vehicle.
Can I manually reset my TPMS?
Don’t start the car; just turn the key to “on.” Till the tire pressure light blinks three times, press and hold the TPMS reset button. Press the button again to start the vehicle. The light ought to turn off in 20 minutes.
Can you turn the TPMS off?
Yes, it is possible to disable your tire pressure monitoring device using a smart, non-intrusive approach. You only need to use an emulator created to get around the TPMS. The TPMS bypass emulator is a tiny box-shaped gadget containing technology that allows you to “switch off” your tire pressure monitoring system.
Where are TPMS installed?
In the US, direct TPMS usage is more prevalent. The sensors are either housed in the tire pressure valve, which also serves as an antenna, or they are band-clamped to the wheel rim. These gadgets deliver the data to an on-board computer.
Should the TPMS be reset after purchasing new tires?
After changing or rotating your tires, or after adding new sensors, you should always reset your TPMS. Even after you have inflated your tires, some sensor manufacturers advise restarting the device. By teaching the primary TPMS system to identify the sensors in their new locations, resetting the TPMS is frequently referred to as retraining the system. TPMS reset procedures vary from vehicle to vehicle and typically involve a specific sequence of ignition and pedal actions, a configuration change in your dashboard menu, or the use of a TPMS Reset Tool.
What does the Nissan Maxima’s tire maintenance warning mean?
The Maintenance Tire Light: What Does It Mean? When your Nissan’s tire maintenance light comes on, it’s time to rotate the tires as part of your normal maintenance program. (This warning light has nothing to do with tire pressure.) Thankfully, the tire maintenance light is not a cause for concern.
Will removing the battery reset the TPMS?
Each vehicle has an onboard computer, which occasionally experiences technical difficulties. Resetting the computer is the best approach to address these issues, and you may do this by removing and reinserting the battery. Locate the negative terminal of the battery by opening the hood of your car. Press the car’s horn to drain any leftover power after removing the negative connector to disconnect the battery. Once the positive terminal is connected again, the TPMS warning light should stop flashing.
My TPMS light won’t turn off; why?
When the TPMS warning light illuminates, proceed with caution. This indicates that at least one of your tires may be at least 25% under-inflated.
*The simplest way to get the most accurate reading is to check the tire pressure before you drive on it when the tire is “cool.” If your TPMS light is on, first check that you have correctly reset your TPMS by following these instructions.
Will my TPMS light automatically turn off if I fill my tires with air after it illuminates?
Several minutes after reinflating the tires to the prescribed pressure, the TPMS light ought to go out.
What happens if I adjust the tire pressure but the light on my tire pressure gauge still doesn’t go out?
The only place that can fix a computer issue that causes the TPMS warning light to turn ON and flash ON for one second and OFF for three seconds is the dealership service center. When the TPMS warning light illuminates and remains on, one or more tires may have low tire pressure. The light ought to go out once the tire is inflated to the recommended tire pressure listed on the door placard. Always check the pressure in all of your tires because one or more of them may not be at the proper pressure.
Can I drive with my TPMS on?
To avoid seeming like Debbie Downer, we’ll simply say no. Driving around with your TPMS light on is not safe. You can’t tell how quickly your tire is losing air or how long it has been over- or underinflated without doing a tire examination. The best course of action is to check the current inflation level of each tire with a tire pressure gauge.
When the tire inspection light appears while you are driving, slow down and get to the closest gas station or service facility.
What could turn on the TPMS light?
The TPMS (Tire Pressure Monitoring System) is designed to notify you when a tire’s pressure is too low and may result in hazardous driving situations. If the indicator is on, your tires may not be properly inflated, which might result in premature tire wear and even tire failure. It’s critical to comprehend the value of appropriate tire inflation and how TPMS can prevent a potentially hazardous situation.
Both excessive and inadequate tire inflation can result in early tread deterioration and potential tire failure. Increased traction, early wear, and an inability to withstand impact from the road can all be effects of overinflation. The middle of the tread on tires with excessive air pressure may prematurely wear out. Underinflation, on the other hand, results in slow tire reaction, lower fuel economy, excessive heat buildup, and tire overload. The shoulders or tread edges of a tire that is underinflated will prematurely wear out on both sides.
Finding the TPMS indicator on your dashboard is straightforward if this is your first time hearing about tire pressure sensors. It is a light that has a horseshoe form with an exclamation point in the middle.