The warranty on your Honda won’t be nullified by installing a cold air intake. The manufacturer cannot void your warranty just because you installed an aftermarket part unless they can demonstrate that the cold air intake caused the harm.
Following are a few factors that could void your warranty:
- If you overload, drive off-road, or race your car and it becomes damaged (in cases where these activities are not recommended for the type of Honda you have)
- When a natural disaster harms your Honda
- If the odometer has been altered, disconnected, or otherwise altered
- If a serious accident involving your Honda results in a salvaged title
Not all things are covered by your warranty. To ensure that their vehicle is covered, most drivers choose to increase their auto insurance policy. You can quickly locate the coverage you require with the Jerry super app!
To get started, just download the Jerry app and respond to a few short questions. You’ll have instant access to tailored estimates from more than 55 leading providers. Each year, the typical Jerry user saves over $800 on their auto insurance!
In This Article...
Can the use of cold air void my warranty?
A Cold Air Intake Work my factory warranty be void? No. If an aftermarket part (such as a Cold Air Inductions, Inc. part) is used in a repair, the manufacturer of a warranted product (in this case, a car), may not void or refuse warranty coverage of the repair in the United States.
What will make a Honda’s warranty void?
Any modification or replacement that seriously harms the vehicle voids the warranty. Laws further stipulate that a dealer must demonstrate that the act of replacing caused harm. The dealer retains all rights to void the warranty in the event that an aftermarket component was installed incorrectly.
Is my warranty voided if I use an aftermarket intake?
Although many sellers would have you believe differently, your warranty cannot be voided by merely using aftermarket parts or customizing your car.
Does breathing in cold air use more gas?
Cold air intakes assist in lowering your car’s fuel usage. This is because improved combustion makes it possible to generate more energy while using less fuel. The process of combustion will be less successful if the air has a lower percentage of oxygen owing to dampness since oxygen in the air is what ignites the fuel.
The airflow to the engine is optimized with a high-flow air filter, which improves performance and fuel economy.
The procedure will be unfinished even though gas will be consumed and a car will be driven. In order to retain performance, the computer’s ECU will choose to use more fuel.
A cold air intake will it activate the check engine light?
Another frequent sign of a troublesome cold air intake is an illuminated Check Engine Light. The Check Engine Light may turn on to alert the driver of a problem if any of the sensors fitted in the intake detect any problems. The most frequent causes of the Check Engine Light to come on are issues like vacuum leaks or damaged sensors.
The induction mechanism that feeds air into the engine is called the cold air intake, and it is crucial to the proper operation of the engine. Have your car inspected by a qualified technician, like one from YourMechanic, to see if your car requires a cold air intake replacement if any of the aforementioned symptoms are present or if you believe that your cold air intake system may be experiencing problems.
What third-party components may void the warranty?
Many people are under the impression that using parts not approved by the manufacturer may void their warranty. Although the producers may like you to think so, this couldn’t be further from the reality. The warranty on your new car won’t be void if you use aftermarket replacement parts. However, adjusting or making changes to your car could void its guarantee. What you should know is as follows.
The Magnuson Moss Warranty Act, a Federal act, regulates consumer product warranties in the US. In relation to the warranties they offer with their products, this Act specifies what warrantors can and cannot do. The Act covers everything from lawn mowers to dishwashing machines, but the warranty that comes with a new car is where it affects the average American the most.
Additionally, the Magnuson Moss Warranty Act expressly prohibits manufacturers from requiring customers to repair their vehicles with name-brand components.
Honda warranty voided if muffler is removed?
The Magnuson-Moss Guarantee Act, interestingly enough, permits modification of your Honda without any negative consequences, thus you can remove your muffler without jeopardizing your Honda warranty.
If you ignore the handbook, these components and auto changes won’t be protected. If you wish to make a modification, always refer to the manual or the dealership.
Even if you decide not to create a mod, you might consider it in the future. Where does the funding come from? Jerry. Yep. Jerry deserves a chance.
In approximately 45 seconds, Jerry, a certified insurance broker, can get quotes from more than 55 of the best insurers. Jerry can assist you with purchasing new insurance and canceling your old policy if you discover a fantastic deal. Users save more than $800 year on average.
Is a cat back exhaust a warranty breaker?
What about an exhaust system with a cat back? There shouldn’t be any warranty issues with other components, including emissions components, as the majority of high-quality systems—at least those that are permitted in all 50 states—are installed behind the catalytic converters.
Does a cold air intake increase engine noise?
An aftermarket cold air intake can produce the same amount of power as a turbocharger by increasing the amount of oxygen in your engine.
The little fuel that is burnt will be burned more effectively, which will increase horsepower.
It’s difficult to predict how much additional horsepower you’ll get because it depends on the kind of system you have.
Wider smooth-bore intake tubes in systems are less constrictive and permit more air to enter the combustion chamber.
Similar to this, systems with front-mounted air filters bring in colder air from high-pressure areas away from the main system.
Why is Cold Air Better for Your Engine?
Since warm air contains more oxygen per liter, it is naturally denser than cold air from a physics perspective.
We can move our arms through loosely packed warm water, but when it turns into solid ice, the molecules become more rigid.
The oxygen molecules pack more tightly into a smaller volume when the air cools. hence, as you pass cooler
Does Cold Air Intake Make a Car Faster?
Although it won’t actually make your car go quicker, a cold air intake can help boost horsepower and acceleration.
A more effective combustion reaction results from the increase in oxygen entering the vehicle engine’s combustion chamber.
When you step on the accelerator, you’ll notice the difference as your automobile burns fuel more effectively.
Do cold air intakes boost horsepower?
By replacing the constrictive stock intake with parts that are made to handle a substantially higher amount of air, cold air intake systems can boost horsepower.
Performance chips void the warranty, or not?
The vehicle warranty will a Performance Chip void it? The Magnuson-Moss Warranty Act ensures that performance chips are safe for your vehicle’s warranty. The warranty on your car cannot be outright revoked by the manufacturer because of aftermarket parts.
Is installing a cold air inlet worthwhile?
Improving airflow is a great approach to boost your vehicle’s performance because more oxygen implies more power from your engine. A cold air intake system can significantly enhance airflow in this situation. Combining this simple modification with other vehicle upgrades can make it incredibly helpful.
Pros
By moving the engine air filter outside of the engine compartment in an effort to inhale colder air, the main advantage of cold air intake is that it increases power. In addition to being out of the engine compartment, it is frequently positioned low to the ground. There are two benefits to this. First off, because heat rises, it prevents hot air from the engine compartment, the brakes, or any other heated component from ascending. Additionally, this filter arrangement aims to draw in the densest air possible because colder air is more dense and denser air is lower. The more fuel that can be burned and the more power that can be produced for improved engine performance, the denser the air must be.
Cons
It is true that the cold air inlet usually receives denser air than the stock intake. However, it is frequently more expensive because it is longer and requires more complicated routing.
The installation process becomes more challenging and time-consuming as a result of the increased complexity.
The cold air intake system’s biggest strength can also be its biggest drawback. More specifically, it’s because of where the filter is located.
To draw in colder, denser air, a low-profile filter outside the engine bay is ideal. However, there is also a lot of dampness and trash in that area. No matter how advantageous it might be, it won’t matter if your intake contains a lot of water. Your car’s engine may hydrolock and suffer irreparable harm if it ingests a substantial amount of water.
Does a cold air intake have any effect?
A significant amount of cold air is added to the combustion process, which allows the engine to burn the fuel more thoroughly and produce more horsepower. Therefore, a cold air intake system is effective. But how much extra horsepower you’ll actually receive from a K&N cold air intake depends on the system type, as well as the state of your particular car and engine. The dyno test results for various K&N intake systems that are installed on a car similar to yours can be viewed, though.
A substantially larger performance air filter is used on a cold air intake system to enable more air into the system. A significant volume of air may always travel through filters like the K&N performance air filter because they use a “depth loading” design to trap extra dirt in a matrix of sticky cotton fibers after it has been removed from the air. Once the air has been cleansed, it enters a broader intake tube with less constricted bends and often fully smooth inner surfaces. Mandrel-bent curves in K&N aluminum intake tubes and molded high density polyethylene in K&N roto-molded intake tubes completely eliminate air turbulence.
A cold air intake system may always supply the engine with a large amount of turbulence-free air by lowering airflow constraints. Additionally, the air filter is positioned to capture the coldest air to ensure that the air is chilly. This frequently calls for a specialized heat barrier to keep warm engine bay air out of the system. The air filter will be moved, nevertheless, to a high-pressure area outside the engine compartment if a front-mounted ram air intake is used (usually behind the front bumper, or inside the fender well). This enables it to gather the coldest air possible, and as the speed rises, more air is forced into the system by the elevated air pressure. A front-mounted cold air intake system can produce more horsepower than a traditional performance intake because of the better airflow dynamics.